Sig P320 X-Ten - 200 Shot (Follow Up) Review. MORE ISSUES?

Рет қаралды 3,350

Күн бұрын

To say I'm slightly disappointed would be an understatement. I've wanted this firearm for a long time. Next time out at the range I'll just run Federal and see if the issues truly continue.
Check out some of my other videos!
Affiliate Links:
Aero Precision: alnk.to/31lmdl4
Ballistic Advantage: alnk.to/caWLdKY
Dark Angel Medical: alnk.to/9xdovwR
Spartan Armor Systems: alnk.to/1C1qgdm
Mantis Tech: alnk.to/7fjFEkV
True Shot Gun Club: alnk.to/a3XNloE
Palmetto State Armory: alnk.to/btjb3xA
KOREessentials: www.koreessentials.com/
- Use coupon code "Conrad10" to save 10% at checkout
Instagram: / andrewmconrad
Business inquiries: andrewconradyt@gmail.com

Пікірлер: 30

@Brad1237202 8 ай бұрын

Hey Andrew! Thank you for taking the time for this honest ammo review! Much appreciated!

@EDCloseIn 29 күн бұрын

FMJ no issues, The big problem is with the defense bullets. PUNCH jacketed hollow point, sig-sauer bullets personal defense.

@gregstreet7902 5 ай бұрын

Refreshing to see your no camera tricks approach. Wishing you future successes 🎉

@Able-Man 8 ай бұрын

Thanks so much, for posting this!!!

@williamgraebe3989 8 ай бұрын

Wow! Your accuracy has really improved since you started this series. Great shooting!

@trashedmechanic1987 8 ай бұрын

I quit buying any kind of winchester ammo years ago. The powder is absolutely nasty. Still have some but I dont want to shoot it. That 10mm is addictive

@jakelapoint 9 күн бұрын

Nice video. I have roughly 1500 rounds thru my xten. Mostly hand loads and the only issue ive run into is with 1 of the mags early on. When i loaded 220gr hardcast, i could get like 13 rounds loaded into the mag and the follower would bind up. After loading 100 rounds or so thru that problem-child mag.. it cleared up and no issues since. Nice shooting! The xten is very accurate im finding.

@guardianminifarm8005 8 ай бұрын

Hmmm. Thank you.

@carrollmartin1535 16 күн бұрын

3000 rounds through my full size and about 1800 through my Compact. Not a hiccup.

@brianbelliveau5551 8 ай бұрын

Nice job buddy

@plane_brain 5 ай бұрын

I believe some Herter's is loaded by S&B. I haven't had any issue with that, fyi.

@joegilbert7661 8 ай бұрын

Definitely you need to get good ammo. Thanks for sharing.

@jeffroberts760 8 ай бұрын

I have had more malfunctions with Hertenberger’s 9mm than Fed, Remington, blazer, and even 2A warehouse reloads I should add that this is with a SS DR920 before I switched to Glock mags Now it runs everything without issue, but there was a difference in the brand of ammo while still using Magpul mags

@cincinnatiking8008 8 ай бұрын

I'd be sending it back to Sig. I'm sure they'll get it fixed for you. That's what I do love about Glock. I had a problem with my 43X. I sent it to Glock, and they basically replaced every part for free. I got it back, and no problems with FTF and FTE. I'm sure Sig will take care of the problems.

@davidwoolard1264 7 ай бұрын

I have had really good luck with S&B. It's what I find on shelves the most at my location and the cheapest. Flat nose and hollow points are the same price. maybe folks are scared of it but it's 100% for me out of a Glock 20.

@DDDYLN 3 ай бұрын

This is the problem with 10mm pistols. I only own one 10mm pistol that is actually reliable, my Gen 4 Glock 40 MOS. Sig Sauer, Smith & Wesson, etc, don't deserve their brand recognition, if they sell unreliable crap. The customers are not their damn guinea pigs. If I have to pull my pistol, it better effing work!

@TheCenturion8404 7 ай бұрын

Do you have the magazine issues? Rounds binding in the body? Limp follower etc. I have 800 through mine and on 4 or so malfunctions that are related to the magazines.

@TheCenturion8404 7 ай бұрын

Sorry, yeah that nose dive on the one round is from the magazine.

@DDDYLN 3 ай бұрын

4 malfunctions is still unacceptable. If you have to rely on a pistol to save your life, it better work.

@johne1653 8 ай бұрын

Some ammo is crappy for sure. I have never really had trouble with much factory ammo. I know some is DIRTY. WWB 100 CT Value Pack 9MM is pretty awful. But it goes bang with reasonable accuracy for my needs.

@johnw4999 6 ай бұрын

My EDC XTEN has nearly 5k rds fired with no issues. Mostly shoot Blazer Brass, Magtech, Sig (all 180 gr. FMJ) along with Winchester Defender and various Underwood loads. Just started shooting the XTEN Comp. Around 400 rds with no issues, knock on wood. 2-3 months later: I’m nearly 7k rds through the XTEN and at 1k in the XTEN Comp. Still, no issues.

@andrewmconrad 6 ай бұрын

Dang, that's a lot of 10mm down range. Glad to hear you haven't had any issues ☺️

@johnw4999 6 ай бұрын

@@andrewmconradI have some Herter’s ammo somewhere. Haven’t shot that brand. Might have to dig them out and shoot them. I tend to avoid ammo not up to “Norma Spec.”

@chasebraswell6948 4 ай бұрын

@@johnw4999no issues with Mags either?

@johnw4999 4 ай бұрын

@@chasebraswell6948I’ve experienced issues with magazines with some of my 20 magazines in inventory. 1-10 I consider older and 11-20 I consider newer, but i cannot verify the magazines have undergone a generation change. 1-7 are range mags. With that, I’ve experienced: It’s tough getting 15 in the mag., but I use a Maglula and make that 15th get in there. When needing to load a full mag in the pistol, insert it as far as it’ll go, and smack it! You won’t hurt it. After ?? cycles, the spring loosens up some. If loading to carry, place a round in a mag and chamber the round, then insert a loaded mag. Also, I’ve had the mag follower (or something) snag inside the magazine causing rounds to come out. I’ve shot same magazines through the XTEN with no issues. IMHO, the recoil shakes things in the magazine allowing the spring to maintain upward pressure. I think what might be the issue is the sharp leading edge on the follower and it friction locks, for the lack of a better term. If you look at a 9mm counterpart, it’s rounded. I tried Springer +5 extensions with no luck, therefore sticking with OEM 15 rd magazines. Again, IMHO, Sig did an amazing job making the 15 rd magazine as small as it is along with the grip. They probably could add a millimeter or two in some areas and radius the follower to ensure reliable feeding. Maybe a metal follower? I’m not a gunsmith/engineer.

@kenmyers3052 8 ай бұрын

Andrew , Blazer Not Knowing . Is the Cheapest Ammunition you can Buy , Not worth the Sales Tax to Purchase . The Most Grey Power Fowl . How Clean Your Handgun after Shooting Blazer Ammo . Place in Dish Washer on Cyl Twice . That Why So Cheap to Purchase at any store .. Always the Cheapest .. And Winchester Herter's at Brass Pro .. I use myself Remington 9MM 115 Gr. Range & UMC Brand never had Problem ...With 5050 Rounds Down Range So Far S&W 2.0 Compact ... Buy What Works ..

@DDDYLN 3 ай бұрын

I want a full size reliable 10mm that isn't a Glock. For whatever reason, firearm manufacturers keep screwing up 10mm pistols. They need to be reliable from the factory. My Gen Glock 40 MOS has never had an issue with any ammo. I have a Rock Island Armory double stack 10mm 1911 with cycling and feeding issues. That was not a cheap gun. I expect better from Sig, especially for the price they're asking. That thing should be reliable with all ammo out of the box. I'm really getting sick and tired of major pistol manufacturers manufacturing pistols that aren't reliable. I don't consider RIA a major manufacturer, but Sig and Smith & Wesson are. Both of these companies make 10mm with a bunch of issues. Customers are not their guinea pigs! These companies don't deserve the name recognition, if they're going to put out unreliable garbage.

@drewlimelight110 2 ай бұрын

Get a sig xten comp

@DDDYLN 2 ай бұрын

@@drewlimelight110 it's a nice pistol. It had some reliability problems at first, but I heard that Sig Sauer worked it out. I already have one double stack 10mm that doesn't work for crap. I'm not sure if it ever will. If I sell it, maybe I'll buy this sig.