Here are the tile cutters amzn.to/2CtfQ0u amzn.to/2CuEP3A

We were trained to hold the sigmas very high at the front of the handle on a score and then you snap the tile on the back of the handle which provides leverage. The larger sigmas such as the 3a,3b4, etc all have a groove in the handle where you should be placing your fingers for the scoring part of the cut. This provided maximum scoring power, if you do not provide enough pressure on your first score you're snap will be effected. Great Video! I appreciate the time you took to make this! Happy tiling!

Love your videos, you put so much effort when you do comparisons. Great job!

Nice little edit at 9:30. No shame in showing the sigma messed up that one snap. There is a lot of human error when snapping on good AND bad snappers

That Sigma is awesome, cuts like buttahhh! I have a Rubi and sometimes scoring long ways down a 24" porcelain tile, when I snap it, the tile does not cut straight, the cut line curves off of the score line, so then I have to take it to the wet saw to straighten it out to get the cut that should have scored and snapped. this has done this since day one. Rubi tech support told me to go buy a 5 wheel kit and try one of the other wheels, with some success, but issue still remains. Anyone else seen this issue?

Thanks a lot for a very enlightening video - just what I was looking for!

Great tool review. Thank you.

Every new tile cutter will cut for sure, let’s see after a month using it every day and make degree cuts, there’s no way....

Great job brother! I have always lived upon the belief of "you get what you pay for" and haven't proved myself wrong just too awfully many times. Thanks for the Video! 👍

I love Sigma cutters I have that baby one in the video and also a 26 and a 39.

I'm not a professional tiler, but I decided to tile my garage by myself two years ago and I bought a DIY cut tiler: it made a good job and I didn't have any problem with the cuts, everything was perfect. But obviously you should buy this DIY for simple and little project, with time and jobs the professional brand will make the difference....

There's actually a massive difference between pull and push in terms of how much pressure you put on the scoring wheel. Push is way better in my opinion because of the mechanical advantage you have.

Great video as always Lanberg very thoroughly explained like all your videos, I have always owned and used sigma's for over 10 years i wouldnt use any other cutter because of there quality design and hard wearing components. In my view they are the best cutters on the market, and a tip to keep it looking new and the bar sliding easily and freely for perfect cutting use silicone spray on the bar and other components to keep it running smoothly and efficiently, love your high quality and informative content. All the best and keep up the fine work Sir 👌

Best tiles cutter Thanks for your helps

Anyone know if you can mount the ruler lengthwise for transport like you can on the larger sigmas?

Nice video. Can you test rail wet saws? Please I love Sigma I have the 14in cutter to the XL cutter. From 2x2 tile to 80in x 48 in tile panel. 🤔 or what ever they are. Big pc. Sigma will last for long long long long time. The biggest challenges is Thin long cuts. I have made some 5/8 in by 48 in In porcelain. 👍🏼

Great knowledge 👍🏽👍🏽👍🏽👍🏽

Great comparision mate. Where the tile cutters really shine is when your ripping a smaller piece say 10-15mm approx 3/8 - 5/8, even the sigma sometimes struggles to get clean cuts without some breakages.

Landberg!!!! Did you out all that truck footage in there for me???🤣🤣🤣 Great video as always bud, keep Killin it, man I want you to know that little by little you're giving me the motivation to tackle out master bath!!! It's gonna be awhile, but like I've said in the past, I've learned tons so far!!!! As always God bless and Dirty Jersey out!!!! Blessed Christmas bud!!!

I would love to see how you feel after using Sigmia’s Max series. The problem I had when selecting a tile cracker is thinking the brands was the difference. I did my research and decided on sigma. The only problem was even the pro tile stores only carried the klick klock series. Once on the job site it did not meet expectations. It went back. Sigma has at least four levels with 6-8 different sizes per level. Not to mention different wheels for different materials. It’s really hard to put different brands head to head. My 4’ sigma max can crack down to 1/4” inch. Not that you’d ever really use it. My big thing is play in the handle and slop, sigma has none. I’d rather buy once and give it to my grand kids in 50 years.

i had sigma from 300mm to 3m.. love it

Well done!

Those Sigma cutters were the top of the line back in the late 90's early 2000's. That $20 dollar cutter would be fine for 4and1/4 ceramic and small thin 6x6 red clay back.

I bought a cheap cutter from lowes for subway tiles and it was so worth every penny. It aint great but they are good enough for the job..and perfect for the price imo

My old boss has had a sigma cutter since 2001 and uses it everyday since then

I have the cheap one, I do regular renovations, bathrooms etc. Coming from using a wetsaw and grinder for everything...I notice my cuts are on a slight angle, even an 8th of inch different on 4" tile...would the sigma cut straighter? I think it's the loose wheel that has too much play on it?

Thanks for the video. After watching your video I bought a cheap tile cutter 1st, struggled with it. Dual rail system is flawed because of the flex. Sadly total waste of money (for me). Was not going to even start any work with it. Put it aside & went shopping.. got the Sigma ART2G (same model as this video) and difference is night and day. My take is this.. If you are saving on labour go buy yourself the Sigma. The cheap one will just waste your time, and be so much harder to work with. You don’t need this hassle.

Привет,коллега!Отличное видео!

You should also do a video of both after a month of use. Due to the fact that the "cheap" snapper has a brand new wheel. After a couple weeks with the QEP tile cutter the guides for me always got out of line while the handle also got out of line and had to push the handle a certain way to make cuts straight.

I don't know how you guys do this tile work. My 14 year son and me just done with a 12 hundred sq ft house floor and it was so much work needs and back are tired but it was worth it. Love teaching my kids how to work.

You are Catching the handle in the wrong place you need to be more forward you can apply more pressure if needed that way and use the back for Snapping, I have the older version of this cutter for about 12 years and ive yet to change the wheel great cutter for small area or up on a platform doing the top cuts if the tile will fit of course. its great for kitchen sized tile like subway and 4x4

Would you recommend the mini piuma or the sigma?

Huge markup on the Sigma, sells for over 200 now

Great video!! Where's the Link to buy the Sigma tile cutter? You said $120.00 In amazon is $179.00 👍

I still like that montolit, it was love at first snap

The $20 cutter would almost make the job more difficult. That sigma cutter looks like a nice quality tool and well worth the added expense. Really enjoy your tool reviews, nice job.

I use always Sigma cutters. My opinion is, Sigma is the best manual tile cutter in every size. I bought a Dewalt wet tile saw too. Thank for the videos! Greetings. Your follower from Hungary 😉

Which do you prefer my friend? The sigma or your monotilt? Do you use your monotilt on most jobs my friend. I’m ready to take the leap but I’m stuck between the both and over ISHII lol🤙🏽🙏💯

Nice video. I hate those bar Cutters they're so junky but good for do-it-yourselfer types. Sigma Cutters far superior than anything

You have your hand way up on the sigma handle you should have it down by cutting wheel. You get better control of power needed to score certain materials. That sigma will take off 3/8 of an inch off the edge of some materials. I don’t see the $20 cutter doing that.

Your high-gloss hard porcelain being cut on the sigma cracked unevenly on the handle end. You edited the video to immediately show a perfect cut and said "and again a very clean cut on the Sigma", but you missed a split second of the porcelain that broke/cracked on the end, (9:30sec mark). Why not be honest about this? Nice cutter though.

Bought the sigma two weeks ago (3 years after this video) and paid 250 (double the price) at my local daltile

The problem with the cheaper version is they are more likely to get damaged in transit or on the job. Sigma’s can take a beating and still cut a straight line. Where as the cheaper version poles can be bent easily and will stop cutting straight.

You should test that $20 anvil brand tile cutter from Home depot!

I want to see Sigma vs Montolit.

Having your hand up near the wheel on the Sigma would give you a much sharper score, and avoid that chip you did well to hide ;-)

Remember the old American superior cutter. Great when it was new s*** when it was old

This 120 dollar tile cutter 4 years later now 320 300 percent mark up

**ADVICE NEEDED** **HELP** I'm Definitely loving this video! Thanks for the upload. Although, I'm not interested in that 20$ cutter.. this video has opened my mind in not being judgemental and focused on "brand name" cutters. I'm feeling much more comfortable shopping around for something cheaper the a Sigma or Montolit. Could you or anyone else recommend a solid mid price range cutter? Approximately $100 I'm interested in cutting 12x24" hard porcelain and subways 6x12 4x12 6x24

What happened at 9:30 where the cut wasnt clean. Nice try to cover up with another tile.

You must be in Canada with gas prices like that lol

Tiles cuttar price

What a difference 5 years makes. Can't get the sigma with the inches ruler for under $200 now. FJB

MELEKALIKIMAKA MY FRIEND🤙🏽🙏💯

Tile change at 09:30 what is this :-(

Love the cost of fuel there. We pay double that per litre or gallon in UK 😢😢😢we pay equivalent of $2.04 per litre 😢😢😢

At 11.27 min The sigma breaks The corner of The tile. Of You watch close You can see it spring away and falls on The fence ciro plate. And You keep your finger in The part thats broken 😊

🌟

No honesty at minute 9:30 STILL GOOD VIDEO

The price of the Sigma is 298USD not 120USD, either you guys in the US have a serious inflation or they raised the price because of good advertisement... for that price I would reccomend to go for the Montolit which is far more popular and probably has a better quality..!

If you really tile guy, you know - clean cut it's only if you set up best diamond wheel. If you use cheap wheel you got dirty cut ...

Part of the problem is that isnt the 14” sigma, which is 250 bucks, its the metric 37cm cutter which is 120 bucks. So...

37 years in the Trade !! Pull cutters are better !!

@11:27 I see a cut mistake, why don't you clearly show it anyway? it's a mistake, but you should be unbiased

Sigma everytime... nothing compares

$300+

Sigma or Ruby... only one's

11:27 the sigma cut bad and you cover the bad cut with your finger

Give it to your brother in law.😆😆😆😂😂😂

0:49 Gas @ $3.69.....😭

At min 9:30 the Sigma cutter broke the tile on the right side, what he shows you as a result is a lie, or another take/try and same at min 11:27 , but this time he just covers the broken edge with his thumb ... look again!!!

You gotta choke up on the handle to cut with the sigma. You use the end of the handle to snap only. That's why they were chipping . Great video though.

You cant compare them mate Sigma is for professional

Sigma: it can't cut smaller, hard ceramic tiles. Totally useless. It will damage all your tiles. No wonder that such tiles weren't shown in this vid. The other cutter: same problem.

9:30 big chip, 11:30 chip flying off too and yet the cut looks clean. hmmmm review or paid promotion for sigma???

9 min 30 sec not clean cut....... jump cut..... clean cut.......

Sigma for kids.,,😂

You aint finding that Sigma for $120 anywhere on the planet! It's over $300 on amazon. Cheapest I can find it is $250.00. It's a quality cutter, but just too much money to justify even for this pro.

LIAR! 9:28 was not a clean cut on the Sigma - you can see it chipped badly and then you showed a different tile after...

why you keep hiding the sigma problem ? Wtf is wrong with people ?

Why so you think folks want to see you fill up , run your mouth about everything that has nothing to do with the opinion we tune in for ?