Great video. Our local sewing machine repair shop quoted $190 for this adjustment. It took me 10 minutes after watching this video!

Thank you for the close-ups and the detail you give in this adjustment. Much appreciated!

Thank you so much bro, I've learned so much and repaired my machine on my own!!! You saved me loads of money!!!

This video saved us a lot of headache and helped us repair our machine. Thank you very much

Thank you, because of you I am off sewing happily. My timing was sooo off a good tutorial.

My machine stopped in the middle of a big project with a tight timeline. Naturally I raced right out and bought a duplicate. Finally found the time and your video. Thank you so much! Saved me a trip across town and a repair fee.

Love watching these videos. I learn so much!

Thanks for the video. I live in the North of Norway, without this video i would have to drive at least 7-8 hours to the closer workshop. Thanks!!!

Thank you for teaching. Easy fix for mom's sewing machine.

Thank u so much brother I just followed your instructions you're a good teacher

Thank you very much I am working on the same model today!

Awesome tutorial! Thanks for sharing your knowledge!! 👏🏼👏🏼👏🏼

This was exactly the repair my machine needed yesterday

Thanks so much great vid, saved me a bunch of time!!!!!

Just fixed mine! Thanks!!

Very nice, thank you for sharing. Some people are cery willing to learn and fix things themselves, for curiosity or for saving money. Sone people will still prefer to take it to a shop instead, and that is good too.

❤ thank you… you’re the best

So helpful! Thank you so much!!!!

thank you very much, I was able to fix my mom's sewing machine

Thank you so very much..all other videos that i have watched, tells you to undo the hook gear to adjust the timing, and me being a newby, thinking that I had bought a dodgy one, and after readjusting the timing about twenty times for it to quickly go out of time! My problem was the actual shaft was not tight enough..🤷‍♂️. Your a great tutor and I wish you and your loved ones the happiest of holidays. Much respect..Rob.

Thanks!! New sub. New at sewing. Really good video. Great work!!

Thank you, so much for this video. My machine is in perfect working order again and I don't have to buy a new one!

Saved my day 🎉❤ Grazie 🙏🏼

Thank you so much for this video

thank you So much !!! Save my life !

Nice - concise with great details! Thank you!!

Thank you so much!

Love it!!

Thank you!! ❤

Awesome!

Very nice video sir

Best video on the topic! thank you

Thank you

Hi what tool did u use to loosen the bolt on the spindle?

I did what you said and it fixed it for about 5 minutes and now it’s off of alignment again. I’m sewing through a single layer of fabric and my needle is hitting that metal spinner again. I’m about to trash a sewing machine that’s new and only been used about 5 times. It’s a singer heavy duty model 4452. I’ve never even sewn anything considered heavy duty with this machine.

Where do I buy the 15 inch niddle from

4:26 Hi! Thanks for the video. I have a question for clarification: did you replicate the same procedure for the needle in the right position as well for the hood/needle location or did you leave the distance as shown in the video greater than the left side? If not, is there a reason when to check left side timing vs right side timing? I remember seeing another helpful video you did but it was specific to check the needle bar height for only that adjustment (without manually also adjusting the hook) on the right side…? Just making sure I’m not misunderstanding or missing when to do both sides or when only left/only right matters? Thanks so much!!

Question: You only loosened that back gear? Not the gear under the hook?

Where can I get a cam feed for a HD110 C singer machine 🙏

Have a question, have a part dont know where it goes?

Can you do a video on how to replace the clamp? It’s broken on mine

hi! I have the same exact model of this sewing machine - and all of a sudden it wouldn't go out of S1 mode! Doesn't matter which type I choose (straight/zigzag), it's constantly in the S1 mode. This just happened suddenly when I was using S1 mode one day and tried to turn out of it but it didn't happen. Just wondering if this is the issue of the needle timing too, or is there other issue? and which video would you direct me to look at to have that fixed? Thank you so much!

My stitch dial isn’t working it will only do a straight stitch. Is there anyway to fix this??

how to fix still loose stich at the back even the tension is in maximum tight that I can hardly pull the thread as i set the tension. my machine is singer and also top loading bobbin.

Somebody could help me pls? I want to know the name of the part that is above of the hook or bobbin on the right side

I need my Singer 241-11 serviced where are you in NY? I would like to hire you to tune up my machine

I have kinda trouble in my needle position, it doesnt work, would you like to help me

Question. When the timing is off does the machine make a buzzing noise as well? My machine is making a buzzing noise as if I have my foot on the peddle just enough to start it in gear but not moving the needle. But if I push harder on the peddle its starts to sew fine. What could this be???

Help! My entire needle went through all the way down to where the bobbin is. I managed to relief the needle, but the top mechanic part, is stuck in the bottom position. How can I fix it?

My wife's machine is the same model as shown in this video, the 4411. After setting the hook timing and needle height as shown, the zig zag will mostly sew a straight line when using a stitch length of 4 (i.e. it skips the right side of the stitch most but not all of the time) but will correctly sew using a length of 1. When I try a straight stitch it will frequently skip stitches regardless of the length. I am baffled by this. I have the Singer manual and have centered the needle as specified therein. I have of course installed a new needle, cleaned the lint, greased and oiled the gears, etc. What am I missing?

I have the Singer Heavy Duty 4452, and I have a question regarding the stitches formed with the needle position in the center. When I put the needle in the center position, I end up with loopy threads on the bottom of the fabric. However, If I change to either the right or the left, it sews perfect stitches. I've adjusted the tension, changed the needle, rethreaded, cleaned the lint, etc, but I can't get the machine to sew a nice seam in its center position. Could you please help me with a direction as to where to go with this? I miss sewing, and I so wish I could figure out how to resolve this issue. Thank you kindly for any help you can provide! :)

Hello - I tried to tighten the little screw on the bobbin case to tighten the tension, but unfortunately I went too far. Therefore the little screw fell out causing all the parts to fall out. I tried putting them back together, but somehow I think I lost a piece. I am wondering whether you could do a vid demonstrating how to disassemble a singer Heavy Duty 4411 bobbin case and reassemble it, so I know whether I have all the parts and where each piece goes. Thank you in advance

Hi, how to repair the needle position when the wheel does not move, in the singer heavy duty 4423?

Anytime I try to move my hook the needle moves with it so it can not line up and it just doesn’t change???!!!! Also I loosened the Alan key screws on the bottom so much to the point one fell out bc I couldn’t get it to work so I figured I should try to loosen them more and after an hour I’ve given up and now idk what to do. Can anyone help??

You are the boss!

Hi , Recently I bought old singer 5050c and it is having thread hook timing problem. The problem is I can not find the service manual anywhere and also which screws to adjust at the bottom of the sewing machine. Appreciate if anyone can help me with this issue. Thanks.

Necesito tu ayuda me compré mi máquina singer heavy duty hace 3 meses por Amazon y apenas me empezó a fallar pero Amazon no me hace válida la garantía, quisiera saber si es un defecto de fabrica o lo puedo arreglar, los dientes de arrastre se van de lado , es decir que no entran en los orificios correspondientes en la placa metálica y por ende la manija manual se traba no se mueve ni la aguja y el motor se escucha forzado, que hago ... HELP !!! 🙏

Hey mister, my handwheel blocked and I cannot find the reason why

Thank you for the marvellous video. Just watched loads, but I still have a problem. My needle is scraping against the metal bobbin holder. How can I fix it please 🙏

My machine says EL and won’t work

PLS add in title exactly model name like SINGER 4423 or 4432

Ayuda

Please give me information Hindi or urdu lenguage

A camera does dot belong on your. You can not view bouncy image with comfort.