much more useful then simply importing CAD, thanks. good video and to the point!
@sancheetbagtharia7 жыл бұрын
my sketchup model has many scaled elements. On importing them to revit, they return to the original size. Any help?
@derekrubinoff7169 жыл бұрын
That's fine for a building, but how about a plumbing fixture? I found an .SKP of a faucet, and I brought it in as a mass in Revit per your instructions. I want to schedule it as a plumbing fixture but Revit won't let me change its category from mass. What to do?
@ludohugo12 жыл бұрын
Still use info from this video in 2021 ! Just fast and direct to the point. Thanks
@alfiesolomon35315 жыл бұрын
Really NIce. How about the structural elements? Does he recognize the geometry of your structure underneath and convert it directly into trusses from it's library? Does it bug at this point?
@georgiosivankof70717 жыл бұрын
Thanks mate! was very useful for me. I would be very thankful if you show how to create simple metal structure and load into revit.
@rbki38 жыл бұрын
hey man how do you change the materials of the imported? I want to render that component into wood surface but it doesn't seem to work when I change the materials on the component material properties.
@ludohugo18 жыл бұрын
Brilliant. Short and sweet...Thank you so much !!!! :-)
@poopertrooperz11 жыл бұрын
Many thanks for this post. How many layers of grouping do you have for this model?
@albertomorales96288 жыл бұрын
can i make a family whit an sketchup model on revit like a fourniture or something like that?
@fireballrob12 жыл бұрын
Thanks a lot Derek--really useful!
@danieleverett35486 жыл бұрын
So when i tried this it all shows as one mass all my floors and walls etc are all grouped together even though in sketchup they arent, can someone help me?
@homerbunker-simpson270210 жыл бұрын
Using this technique, Revit throws me an error message "Some ACIS objects could not be imported. To import them, use AutoCAD to convert them into polymesh objects and reimport."...It does not like curves with multiple faces...such as pipes, railings, etc with more than sever segments. Probably doesn't like a lot of other stuff too if I know Revit. Anyway, I got a skp model to Insert into a Mass. However, I don't want it at my level One (0'-0")...and I cannot seem to move it in the Z-axis. Any thoughts on this? Ah..never mind-right Click-Edit Family..THEN move it. In my case I'm not going to build walls and roofs on my model...I'm bringing in something with complex geometry that would take a few years in Revit to model...so it's a real time saver. However, the line weights/visibility graphics cannot be modified. Any workarounds to this issue?
@jadhavsaeel45732 жыл бұрын
Bro it is the best thing u r shown it is 100% working thank u ☺️ 👍
@zinebke66924 жыл бұрын
A life saver THANK YOUU!!!
@aeiconsarquitetura11 жыл бұрын
Muito bom sua dica. Thank
@jakefraser627111 жыл бұрын
didn't work at first for me - my model was too complex so deleted furniture and any non critical parts then saved it as sketchup 7 and worked thx for the vid
@e6melanie Жыл бұрын
It works! Many thanks!
@RockingPuccini40911 жыл бұрын
Awesome info!!!! Thank you for sharing!
@jessicahuang71810 жыл бұрын
Hi, your video is very helpful. I have a question when I did it by myself. it shows "This family instance has too many edges. Remove unnecessary geometry or split the instance into multiple instances." and stop me from inputting the sketch model.
@antrikshtawar46116 жыл бұрын
Did you get any solution ?
@vihanaik79406 жыл бұрын
same problem...
@MrCassett3 жыл бұрын
Did you get any soution?
@anhhoangquoc98392 жыл бұрын
@@antrikshtawar4611 did you get any solution
@antrikshtawar46112 жыл бұрын
@@anhhoangquoc9839 yes I did that but don't remember what I have applied
@qadryansyaharchitect6 жыл бұрын
thanks , you tell what i need
@dirkxjustin9 жыл бұрын
Thanks for the video, it really helped me out. Does somebody know if it's also possible to make a solid mass out of a sketchup imported mass? And assign a material to that mass afterwards?
@picklesandsparkles73807 жыл бұрын
Revit 2014. Tried to save sketchup as versions 5, 6, 7. And it still says can not open file.
@anukritimisra8544 жыл бұрын
same
@daylanwilliams54847 жыл бұрын
I have tried this but it doesn't work. I was able to do everything but when I try to reopen the file it can't be reopened.
@rulanaabidi22718 жыл бұрын
Thank you so much!!
@ryansolomon79226 жыл бұрын
Legend! Didnt know to downsave
@HikikomoriDev10 жыл бұрын
Thanks man!
@tomasoconnor64569 жыл бұрын
you have to have sketchup pro to convert to autocad
@mattap988 жыл бұрын
amazing!
@ponyta79 жыл бұрын
thank you TT
@karishmap50534 жыл бұрын
is it possible to edit the import?
@iHaveContrl10 жыл бұрын
only works for very small and simple model... which is 90% of my model can not work that way :(
@AnsonMStuart10 жыл бұрын
Great video! Thanks.
@catchristy9 жыл бұрын
Thank you!!!
@nadeemgmahran9 жыл бұрын
it gives me this warning Some ACIS objects could not be imported. To import them, use AutoCAD to convert them into polymesh objects and reimport.
@calisoccergirl10957 жыл бұрын
me too - has anyone been able to fix this?
@aditya_it_is7 жыл бұрын
thanks man
@sindhusp94203 жыл бұрын
Thank you...
@ZeezoRockout10 жыл бұрын
nice... but doesn't work with complicated models... my revit crashes every time I import a complicated model...
@AureoMendesDeOliveira6 жыл бұрын
mine does the same thing I just import it as a normal Sketch up model
@Guid5i10 жыл бұрын
THANK YOU!!!
@ahsansumit70187 жыл бұрын
SAVED THE DAY :D (y)
@2saadkhan5 жыл бұрын
In revit it showing that error that this family has lot of edges..
@vinayanam23459 жыл бұрын
wonderful ,thanks a lott
@skurwodaktyl41554 жыл бұрын
1K like! Thanks for help!!!!!!!!
@amirhosseinsohrabi959911 жыл бұрын
thank you so muchhhhhhhhhhhhhhhhhhhhhh
@kerizmimar2 жыл бұрын
its bot working properly lost of elements problem
@LifeWithWill7 жыл бұрын
Doesn't work - "Cannot open "file name.skp"
@lucagiacometti98757 жыл бұрын
please use version 6 or 7
@ebekaebeka7 жыл бұрын
version of what?
@LifeWithWill7 жыл бұрын
Works with version 7 of sketchup
@ebekaebeka7 жыл бұрын
i see. Let me try now again with version 7
@ebekaebeka7 жыл бұрын
Thanks bro it works now :) btw ı checked ur channel you have great contents, keep it up!