SKODA FABIA Door Card Panel (Front) Mk1 99-2007
Рет қаралды 77,393
4 жыл бұрынIn this video I show you how I removed and refit the front driver door card inner panel on a Skoda Fabia MK1 (99-07) which is similar to other VW/Audi/Seat/Skoda models
Gedore mechanics tool set amzn.to/3zR45Ma
inner panel fixings:
My car uses M6 threaded bolts with a 10mm head x 10mm thread length. I would recommend using steel rivnut preferred. Be careful taking rivets out.
panel clips: 6Y0867260
panel clips: amzn.to/3GZ0T5s
CR2032 key fob battery
amzn.to/3Aw3dwW
Micro-switch: amzn.to/3rZwLkb please check to compare first
Please Like this video:👍 • SKODA FABIA Door Card ...
Please subscribe to this channel:👍 goo.gl/eubNMd
Please share this video:👍 • SKODA FABIA Door Card ...
Follow me on Twitter:👍 / hatboyharvey
Buy Harvey a Coffee: ko-fi.com/hatboyharvey
I thank all you guys for watching 😎. Please let me know if this video helped you and what you think in the comments below and don't forget to like, share and subscribe for more escapades of HatBoyHarvey in the next video release,
(Oh and he’s the rabbit in the video if you’re wondering)
The content of this video is for information and entertainment value only and it's creator makes no claims, promise or guarantees of it's accuracy, coverage, instruction or adequacy of the procedures contained therein.
HatBoyHarvey assumes no liability for property damage or injury incurred as a result of any of the information contained in this video.
HatBoyHarvey recommends correct safety practices when working on motor vehicles, vehicle lifting tools, axle stands, hand tools, electrical equipment, chemical, products and consumable parts, lubricants or any other tools, equipment, chemical product and consumable parts, lubricants seen or implied in this video.
No information contained in this video shall create any expressed or implied warranty or guarantee of any kind of expected result including any injury, damage or loss that may result from improper use of the information contained in this video and the use of any tools, equipment, seen or described in this video and is the sole responsibility of the viewer and user and not the creator of this video and HatBoyHarvey.
Music: Race_car / run_one_down / youtube_audiolibrary / also Audionautix is licensed under a Creative Commons Attribution license (httpscreativecommons.orglicensesby4.0)
@amrkoptan4041 Жыл бұрын
that was an amazing video and quite detailed, thank you for the effort done here
@HatBoyHarvey Жыл бұрын
Thank you, glad you liked the video, hope it helped :-)
@ruimvp 4 жыл бұрын
Thank you again. I broke the little mirror control cover. But drilled a hole and make it conic and with a long conical black screw I used the place of the little torx behind. Now it is much easier to remove and it looks really nice. Not an ugly modification. Done it in the other side to for symmetry. Keep going.
@nielso.kristensen8056 4 жыл бұрын
Thanks again for an easy to follow video. It had been a great help, if I had the video, when i changed the innner panel with wires for the window open/close mechanism. The plastic guide was broken on one side (which is a common issue). Look forward to see a video, where you dismount the inner panel and service the window mechanism or the door lock. It can be troublesome and a little difficult, but the way you usually show it step by step in detail, I am sure it will be a great help.
@HatBoyHarvey 4 жыл бұрын
Thank you for you kind comms. I changed the lock many moons ago, but will do a video on it, maybe put my old lock back just for fun. I wanted to do the door card video so I don't have to do it again when I take the inner panel stuff off. The videos do take some time to do, but it is my editing software and computer that slows me down at the moment. Would you believe I use 'Shotcut' and an old laptop, which takes forever to compile ;-)
@tonyreina4137 Жыл бұрын
Thank you You have saved me braking the fittings. I could not have removed the card without your video Thank you again Tony
@HatBoyHarvey Жыл бұрын
You're very welcome :-)
@GreekOrc 2 жыл бұрын
excellent video mate... Thanks for all your Fabia videos
@HatBoyHarvey 2 жыл бұрын
My pleasure, only too glad you like them :-)
@Piebochan Жыл бұрын
Thank you so much, HBH, excellent tutorial, very helpful! I had to change my interior door handle so the panel removal video was exactly what I needed! I lucked out on the awkward first clip, got it first time with a long pencil! :)
@HatBoyHarvey Жыл бұрын
You're very welcome, glad I could have been assistance, Oh for the good old pencil, no batteries needed, just sharpen and go :-)
@kevwilliams1 Жыл бұрын
Thank you for your videos you’ve helped me fix the leaky footwell problem on my fabia 🤗
@HatBoyHarvey Жыл бұрын
Thank, glad to have helped you with my video:-)
@Vision20247 2 жыл бұрын
That’s great detailed information. Thanks
@darstellar 3 жыл бұрын
Very useful indepth video thank you! Little tip with the string is handy.
@HatBoyHarvey 3 жыл бұрын
Thanks, glad it was helpful :-)
@donaljamescaddye3805 4 жыл бұрын
Nice to know how to do it correctly Harvey ! Had I had this video I would not have broken the mirror control panel, broke the clip of the kerb light, and lost one of the door card retaining clips ! I looked at another substandard foreign video which had no sub titles and mistakes were inevitable! Your vids leave no doubt about the proper way ! Thanks a mill !
@HatBoyHarvey 4 жыл бұрын
You're welcome. As you can see in the video I also broke those things, so I thought it was good to guide others away from doing the same. Every clip on these cars seem to be different in some way! ;-)
@gordonstevens6050 Жыл бұрын
An excellent teacher
@HatBoyHarvey Жыл бұрын
Thanks for your kind words :-)
@J.J.CerpaG 5 ай бұрын
Excelante tutorial. Muchas gracias 👏🏻👏🏻👏🏻👏🏻
@raymondee100 4 жыл бұрын
Excellent tutorial thank you 👍
@HatBoyHarvey 4 жыл бұрын
You're very welcome, glad it was helpful 👍
@raymondee100 4 жыл бұрын
With you're help got the door panel off in less than 10 minutes, I have used your videos before with repairs to my ageing skoda thank you. Very clear and precise thank you 👍
@nagya5162 4 жыл бұрын
Thanks for very profesional explanation
@HatBoyHarvey 4 жыл бұрын
You're very welcome :-)
@Termiic 4 жыл бұрын
Gonna do my rear door panel replacement, gonna say a big thank you in advance. *fistbump*
@HatBoyHarvey 4 жыл бұрын
Hope it goes well, fistbump!
@lawrenceagius4437 3 жыл бұрын
an excellent, step by step, easy to follow video. v. good. tks
@HatBoyHarvey 3 жыл бұрын
Many thanks, glad you liked it :-)
@YorkyFromFax 4 жыл бұрын
You read my mind hatboyharvey, I really needed this how to. In my door panels I have reflectors instead of the Courtesy lights. So I was wondering if the loom connection would still be there & I was like how do I get the door card off. I have an 07 Bohemia estate, I think a lot of little extras were not on this final model like the earlier Fabia models. I’m pretty certain my wing mirrors are not heated either. I also have the dreaded boot not opening, I viewed your upload on that. But I think either to tailgate switch is buggered or the solenoid catch release needs replacing. You & your uploads over the years have saved me £’s in labour bills at garages. Thanks 🙏 & have a nice day, the suns out up here in Yorkshire, gonna do some Fabia tinkering. 👋
@HatBoyHarvey 4 жыл бұрын
Great to hear my videos have helped and saved you money. I always like to do my own work to know it's been done to my standard. could be the tailgate switch as water from the jet wash can leak down. will do a video on that. Yorkshire is the best place for tea! me thinks :-)
@YorkyFromFax 4 жыл бұрын
HatBoyHarvey , Yup Cup of Yorkshire gold ☕️. Would be great if you did a video on the switch in the future, greatly appreciated 👍
@nPCHL 4 жыл бұрын
Thanks!!!
@lucky997 Ай бұрын
Thanks for to help me!👍
@HatBoyHarvey Ай бұрын
You're very welcome :-)
@djturbine7565 10 ай бұрын
Very handy! If you ever get round to changing stereo or speakers then it'll make my day. I can't watch anyone else's videos on a Fabia anymore, nothing comes close to this series!
@HatBoyHarvey 10 ай бұрын
Thanks, is that your cat or just an online image- gorgeous?
@djturbine7565 10 ай бұрын
@@HatBoyHarvey It is my cat, Viv! That photo is from when she was a kitten, I may have to update it. We are fostering a new cat next week so she’s not going to be happy, she’s a proper spoilt only child.
@HatBoyHarvey 10 ай бұрын
She's a real beauty even though this is a kitten shot, I have 2 well adjusted individuals, brother and sister. I had a British blue short-hair once, but these are just ordinary moggies. Good luck with socializing her with the new cat :-) (I do plan to install new speakers as I have found some good Panasonic or pioneer ones in the loft)
@5eul 4 жыл бұрын
Great man
@HatBoyHarvey 4 жыл бұрын
:-)
@aleksandarcrnomarkovic8360 2 жыл бұрын
Thankssssss a loooottttt :))))
@adidaraban699 Жыл бұрын
Hello...can you make a video ,how to change a music speaker in the front ??thanks
@philhulton Жыл бұрын
What size bolts do you need to fit the door panel itself? :) Mine had rivets originally, but i would like to reinstall with Bolts instead if i can
@ALXABABYCASHMERE Жыл бұрын
Hi Phil I am just about to drill out the rivets on mine and have ordered a mixed set off ebay of rivet nuts with atool. I will let you know the size when ive got it right!
@scorp3x 4 жыл бұрын
You're a life saver! thank you very much!!!
@HatBoyHarvey 4 жыл бұрын
You're welcome, glad it helped :-)
@blissacer 2 жыл бұрын
Merci beaucoup
@HatBoyHarvey 2 жыл бұрын
de rien :-)
@ikerdiez9213 4 жыл бұрын
A great explanation. Congrats. Are you planning any coolant change in the short time?
@HatBoyHarvey 4 жыл бұрын
Thanks :-) Maybe I'll do the coolant change soon. If you are desparate - check level is correct -open tap under the radiator - empty contents and measure - refill with exactly the same amount of pre-made climate adjusted coolant :-)
@ikerdiez9213 4 жыл бұрын
No, I´m not desperate. Just I´d like to see a good coolant change because there are a lot of videos that don´t show the change done in the correct way.I bet that you´ll do it smoothly, as always in your channel.Just don´t forget to open the lower pipe of the oil chiller. This is never done in KZfaq videos and it´s really important.Also, when people change the brake fluid they never say that the clutch is also hydraulic and it must be purgued as well. Maybe because they ignore it.Go ahead with you make the things thinking in the people, and this deserve a recognition.
@sergeyenigma5841 4 жыл бұрын
Супер канал!!! Большое спасибо!!! Очень помогаете!
@HatBoyHarvey 4 жыл бұрын
пожалуйста, мой друг :-)
@sergeyenigma5841 4 жыл бұрын
@@HatBoyHarvey Украина,Харьков и Луганск с вами!)
@mathiash366 4 жыл бұрын
Thank you so much for this video. Im a bit sad that you didn’t show how to fix the Window wire for the Open and close thing. Mine just broke and i have a new panel but im not sure how to fix it /:
@HatBoyHarvey 4 жыл бұрын
You're very welcome, will do a video on fitting a new regulator mechanism. It is easier if you have an earlier model that is bolted on rather than the the riveted later models :-)
@mathiash366 4 жыл бұрын
@@HatBoyHarvey Thank you! I have a Skoda Fabia 1.4 16V 2005 i think it is almost the same as yours? Also, do you know if i just can plug in a new pair of speakers in the door? like take the standard one out and connect a better speaker? Thanks!
@mazenhelwani4292 4 жыл бұрын
Hello Thanks a lot for your videos , Do you advise for Start-Stop button and if yes could make a Video how to install it . Thanks
@HatBoyHarvey 4 жыл бұрын
You're welcome. I guess you could do that, it would make it easier to start.
@mazenhelwani4292 4 жыл бұрын
HatBoyHarvey thanks , I meant if you could make this Video ?
@szampon010 2 жыл бұрын
Hi. Once again my work will be easier and faster thanks to your video. Have you change your speakers in front doors? Any advice?
@HatBoyHarvey 2 жыл бұрын
Thanks, I haven't changed mine yet, buy have got some speakers that mat fit so will look into installing those when I get chance. You have to be mindful of the spacers and water ingress :-)
@szampon010 2 жыл бұрын
@@HatBoyHarvey I fiinish my work.I buy a pair The Pioneer speakers TS-G1710F with plastic adapters and signal conectors. My seller assured me that this will fit well...but i must modify almost everything ;) Big surprise was stock speakers install on nit connection. Who do that ??? :O But finally i finish and it is much better. I have stock Skoda radio wiith casette player (oldschool) :)
@szampon010 2 жыл бұрын
@@HatBoyHarvey drive.google.com/drive/folders/1N3LFUjYJ3Zgps5VnG35NmwcEhlGm_8iK
@Peterfiera 2 жыл бұрын
Hello friend I wanted to change the speakers and my question is: can you reuse the adapters that carry the speakers in other that boy to put? a greeting
@HatBoyHarvey 2 жыл бұрын
hello to you also. It all depends upon the speakers you are fitting, which may or not fit with the original adapters. Many aftermarket speakers come with there own adapters and you will have to drill out the rivets probably. I'm sorry but it isn't my field really and only listen to the radio :-)
@Peterfiera 2 жыл бұрын
@@HatBoyHarvey I have the 1.4 16v and I have problems with the egr / probe, change the collector but it has not been solved, and I wanted to cancel the egr but I already told you it is electric and gasoline
@HatBoyHarvey 2 жыл бұрын
If the EGR is electrically operated you can't delete it without changes within the ECU. The fault you mention may lay somewhere else, maybe the map sensor, crankcase breather, PCV valve.
@user-rt4zj4gv6l 4 жыл бұрын
Tell me how much long size in this door panel in these speaker .i want to know the diametre oi size..
@HatBoyHarvey 4 жыл бұрын
Standard speaker is approx 6" or 145mm diameter 165mm total including rivet holes. The depth of the speaker protruding form the inner metal panel is 40mm total. Hope this helps :-)
@boxingforselfdefence7620 3 жыл бұрын
What about that panel behind the card that is bolted down, can that be removed? My key mechanism is in pieces in there somewhere.
@HatBoyHarvey 3 жыл бұрын
Check out my upcoming video this Sunday for this, thanks :-)
@boxingforselfdefence7620 3 жыл бұрын
@@HatBoyHarvey Thanks!
@tadeuszwojcik4748 Жыл бұрын
👍👍👍👍👍👍
@gordonkunz9796 4 жыл бұрын
Hello from Germany! Do you know how much cm have the Speakers? 😅
@HatBoyHarvey 4 жыл бұрын
Hallo Gordon Kunz Lautsprechergröße Der Standardlautsprecher hat einen Durchmesser von ca. 6 "oder 145 mm und einen Durchmesser von 165 mm einschließlich Nietlöchern. Die Tiefe des Lautsprechers, der aus der inneren Metallplatte herausragt, beträgt insgesamt 40 mm. Ich hoffe, dies hilft. Speaker size Standard speaker is approx 6" or 145mm diameter 165mm total including rivet holes. The depth of the speaker protruding from the inner metal panel is 40mm total. Hope this helps :-)
@gordonkunz9796 4 жыл бұрын
Thank you very much! Very helpfull!! I like your videos!❤
@elscyd 3 жыл бұрын
Mi skoda sedan tiene un terrible problema en la perilla de cierre de las puertas,no es electrónico es manual...crees poder decirme como reparar esa parte? O q crees q deba hacer?
@HatBoyHarvey 3 жыл бұрын
¿Se enciende la luz de la tecla? ¿Funciona la llave todas las cerraduras manualmente en la cerradura de la puerta del conductor? Cuando abre la puerta, ¿están encendidas las luces interiores / luz de la puerta? ¿Funciona la luz intermitente de seguridad en la tarjeta de la puerta? Verifique las conexiones que van a la puerta por el pilar A y también la cerradura de la puerta y la unidad de control debajo del volante al lado del pedal del embrague / calentador. ¿Ha habido algún problema con la humedad en el coche? Por ejemplo: los espacios para los pies se mojan; esto puede causar problemas eléctricos con las conexiones. El software OBD2 como VAGCOM podría diagnosticar y aislar el problema para que sepa dónde buscar antes de comenzar a reemplazar cosas. Las unidades de control fallan / las cerraduras de las puertas fallan / fallan las conexiones de cableado. También verifique que la batería esté bien con buena tierra. Espero que esto ayude :-)
@elscyd 3 жыл бұрын
@@HatBoyHarvey no,la luz de puerta abierta no enciende,la perilla de la puerta no baja,la cerradura de llave del conductor esta totalmente dañada,gira a 360 grados,no tengo problemas de humedad por ahora...las otras puertas si cierran bien usando la perilla,pero no abren muy bien desde afuera...la del chofer si..pero antes no abría desde afuera ahora si abre desde afuera...cuando se abren las puertas las luces interiores a veces no reaccionan al mismo tiempo o a veces no apagan cuando la puerta cierra...no sabia q mi skoda tenia entrada OBD2(EN DONDE ESTA hubicada?
@elscyd 3 жыл бұрын
@@HatBoyHarvey voy a tener q subir un vídeo sobre mi skoda en mi canal...para que puedas ver los problemas que tiene mi skoda...no hay problema con eso?
@HatBoyHarvey 3 жыл бұрын
Vale. Por lo que dice, creo que debe mirar la cerradura de la puerta del conductor y su microinterruptor y entonces reemplazarlo. Espero que no haya dañado el brazo de la pala del cañón de la cerradura; Si esta roto, se puede reemplazarlo fácilmente con cualquier otro cañón de la cerradura. Verifique los cables y conexiones que salen del pilar A y del motor de la ventana y del cierre. Espero que le ayude. :-)
@HatBoyHarvey 3 жыл бұрын
Cuando enciende el motor, ¿hay luces de advertencia encendidas? Compruebe que la batería tenga más de 12 voltios y compruebe que se esté cargando a unos 14 voltios. La cerradura de la puerta del conductor y el cañón deben cambiarse kzfaq.info/get/bejne/rpd0fd1lxJjSXac.html Verifique el fusible del faro / conexión.
@davidsayer2001 4 жыл бұрын
Do you know the front speaker size?
@HatBoyHarvey 4 жыл бұрын
Standard speaker is approx 6" or 145mm diameter 165mm total including rivet holes. The depth of the speaker protruding form the inner metal panel is 40mm total. Hope this helps :-)
@davidsayer2001 4 жыл бұрын
Will you be doing a video about it soon for upgrade ones?
@HatBoyHarvey 4 жыл бұрын
Thanks for letting me know your interest in this. It looks like you would only have to drill out the rivets to fit new ones and attach, but never done that. I would only install if a company offers them to me :-)
@davepusey 4 жыл бұрын
Is there any part of that car that he hasn't taken apart yet?!
@HatBoyHarvey 4 жыл бұрын
I'm working my way through it, for sure ;-)
@user-ez8zv3bt2s 4 жыл бұрын
Полезное видео, а нет у вас видео как разобрать полностью дверь для замены замка
@HatBoyHarvey 4 жыл бұрын
Het, Я сделаю это позже :-)
@laszlokoszoru2505 3 жыл бұрын
Jó ez a bemutató,azért megjegyezném,hogy nálunk nyilván ez a baloldali ajtóra vonatkozik,és csak ha lehet meleg helyen legyen a szerelése,mert a müanyag törik.A gyári hangszorót én szívesen kicserélném,mert egy idő után a membrán már szétszakad,és a hang torz lesz.Sajnos nekem már a 3.panel van benne,mert az ablakkeret tartó müanyag el szokott törni. Ez avval jár,hogy az ablakot nem lehet sem lehúzni,/ez még a jobbik eset/Sem fel,és akkor panell ki,és vagy komplett csere,vagy ha lehet akkor jav,de ez is borsos áron megy,ja és elektromosról beszélek.A bontóba 10efr köril lehet kapni.
@HatBoyHarvey 3 жыл бұрын
köszönöm :-)
@user-xy2pd8pi4b 4 жыл бұрын
Блин, у него панель стеклоподъёмника на болтах, у меня с обоих сторон на заклепках(((
@HatBoyHarvey 4 жыл бұрын
Yup, bolt on mine being slightly older model I think. I think it maybe possible to convert a riveted panel to bolted one somehow :-)
@antoniolovosevic5688 2 ай бұрын
a1q
@ALXABABYCASHMERE Жыл бұрын
Hi Harvey Top Banana. Getting the small window switch cover off wasnt so easy. Couldnt have done it without your guide. I did buy some plastic prise tools though. cheap and very useful! Im now going to attempt the replacement window regulator following your video guide! Without your detailed excellent video 'how to guides' it just wouldn't be easy and errors or trim damage would be highly likely!
@HatBoyHarvey Жыл бұрын
Thank you kindly for your comments, it makes it all worth the effort in making the videos as clear as I can :-) , I also love bananas!
@ALXABABYCASHMERE Жыл бұрын
@@HatBoyHarvey cheers Harvey. Innow have the door card off! I did break a few clips though. They are a bit brittle with old age like me! Ive order new ones off Ebay. Sadly my metal door inner panel is rivetted on and not bolted on, which is a pain. I guess ill have to carefully drill those rivets out. I have just ordered some ruver nuts and a rivet nut wrench to attach them. The replacement panel just has holes. Ive not done rivnuts before, so not sure what size I will need or how to attach them. I'll see what arrives in the post. Thanks very much. All good so far! Cheers and Best Andrew
@adinfinitum4490 4 ай бұрын
Thanks!
@HatBoyHarvey 4 ай бұрын
No problem!
💀Skeleton Ninja🥷【にんげんっていいなチャンネル】
Рет қаралды 7 МЛН
TUTORIALE AUTO
Рет қаралды 45 М.
Akademia majsterkowicza
Рет қаралды 300 М.
Zoltán Horváth
Рет қаралды 146 М.
BMW GSA 1250
Рет қаралды 6 МЛН
Ximei Jo
Рет қаралды 12 МЛН