If you are tuning the guitar laying flat, it is going to be out of tune when you have it in playing position due to gravity.
@RandySchartiger5 жыл бұрын
nothing beats a floyd rose when set up properly!
@SkyscraperGuitars5 жыл бұрын
No doubt!!! Nothing beats a little well set up wang time.
@davidlongshlong9moya8314 жыл бұрын
That’s right!
@MajorUpgrade4 жыл бұрын
@@davidlongshlong9moya831 I believe you. I totally believe you.
@CTSmerv4 жыл бұрын
key phrase "...when set up properly".
@crashdummy403 жыл бұрын
I like the fact i can beat the hell out of it and stay in tune.
@TheJuliokan4 жыл бұрын
You do the setup the same way that I've been doing it since almost when I started to use and love Floyd Rose systems (licence, special, etc.). There are a few points/tips that I have to mention: · All the setups that I do, even tho it's a little bit, just a little bit more difficult, I do it in playing position. I've noticed that gravity and neck-rest thingy affects the intonation, string height and pickup height. You to the setup in certain position but when you sit or stand up and put your guitar in playing position, it changes. · The wood block can be customize with any piece of wood, a saw and some sandpaper. I have one for two guitars that I have (sand paper two faces of the block). · Before intonation, by the way you did a fantastic job mention how to do it properly and with the correct tools,I advise to first take the old strings, clean the guitar, put the new strings, tune it to pitch, check the relief of the neck, check the pickups height and then the intonation. · When putting new strings, release the springs just a little bit, lock the bridge by putting some thin enough pieces of wood underneath the base plate of the bridge but just to lock the strings and putting some tension on them, because it is a struggle to move the bridge with the tremolo bar every time you put and string and lock it due springs tension, specially for beginners on this. Everything else, OH MAN! You are on point :) Greetings from Mexico.
@rickwerner14323 жыл бұрын
This is correct,.. I've found the same thing,.. especially on guitars/necks that are thin.
@montauta11 ай бұрын
Tienes toda la razón, yo lo aprendí del técnico de Steve Vai. El explica del porqué hay que setear la guitarra en la posición de cómo se toca
@AaronNGBnTech4 ай бұрын
exactamenteeee, te sorprendería la cantidad de ``técnicos `` he visto ajustar guitarras en su mesa de trabajo, y a la hora de tomar la guitarra siempre están mal ajustadas
@SuperThew4 жыл бұрын
It’s so refreshing to finally see someone setting up a Floyd Rose properly I’ve watched many videos and this is the only one that has got it right
@OfficialFatLip4 жыл бұрын
Total hog5hit, there was zero tips on spring tension
@leedemkiw60854 жыл бұрын
Technically it's not correct.
@JB-qc1kj4 жыл бұрын
Fat Lip any KZfaq videos on spring tension for setting up a FR that you recommend please?
@Ayyem932 жыл бұрын
Spring tension is the simplest part. I've had my first floyd guitar for a week and I've got it down, tune to whatever you play in after you have your action intonation amd neck relief set then tighten or loosen the springs to where the bridge is parallel to the body while being in tune. It's really simple guys.
@Hypersp4ce4 сағат бұрын
@@Ayyem93 You do neck relief first, then the action. But I'd set up the springs before intonating. You don't want to have the bridge at a different angle or height before finishing the intonation, That's just how I'd do it but your method would end up working too. I really agree with you about the spring tension being quite simple. I'm pretty sure I figured it out on my own like 20 years ago when I barely knew what I was doing haha
@adobejava37524 жыл бұрын
This is great!! My order a set of 4xTrim Block plus Intonation and it arrived in 3 days. Thank You, man! Now I do all the Floyd Rose tremolo guitars setup and restring like a Pro.
@thefilthygringo92282 жыл бұрын
Y’all have some awesome videos and all your products are untouchable. Top notch!
@freeelectron82613 ай бұрын
I'm a Floyd Rose newbie so this vid is a must see for me. Thanks SG you rock!
@SatanClaus694 жыл бұрын
Mate, I loved this video! Great tutorial and I love your on-screen presence! You've made it entertaining, shared knowledge and kept it fun. As someone who has struggled with Floyd's in the past, thank you! Subscribed and I will be getting those trem blocks too :) Cheers!
@SkyscraperGuitars4 жыл бұрын
Right on! Thanks for the kind words.
@Andy-th9kj4 жыл бұрын
I love that you gave other options other than your product for those that don't have extra money currently! Thank you. Will probably buy a Trem Wedge in the future though.
@keithcourneyea16095 жыл бұрын
Best vid on this process that I’ve seen. And I’ve seen many. Will be checking your site for sure.
@SkyscraperGuitars5 жыл бұрын
Thank you Keith!
@Bierball4 жыл бұрын
That's how you sell products. Watched the video, went straight to your webstore and bought the block set and intonation tool. A bit pricey but it'll be worth it. I remember what a pain in the ass changing strings and intonation used to be on my Jackson back in the 90's.
@Zastav424 жыл бұрын
Bierball 90’s Jackson’s ahhhh the good old days!!!
@heatnationwpb3 жыл бұрын
Same. Went straight to the site and bought his tools!
@hugq143 жыл бұрын
“A bit pricey “?! $35 for an intonation tool?? Really??
@TomGlander3 жыл бұрын
Yep. "Me too." Going to return the Stew Mac tool when it gets here.
@tommythompson79414 жыл бұрын
Thank you man. What a generous upload. I have been stressed about this kind of diy project given the value of these guitars like the Kramer and the Charvels. Bravo guitar mentor. Great ad lib too; really a great tutorial and educational film.
@SkyscraperGuitars4 жыл бұрын
Take your time. You'll be stoked when your favorite old shred guitar is ripping!!!
@nsknyc Жыл бұрын
Beautiful work, setup, and tools. Checking out the store!
@THCREDEYE4 жыл бұрын
Great video! I used a Sharpie pen instead of a 9v battery for a trem wedge, worked really well. I found that if the Sharpie wasn't big enough I could add a guitar pic until the trem was flat.
@rkoz554 жыл бұрын
Just got my first Floyd Rose today. Thank you Very Much for the vid and I'll be buying one of those tools, maybe one for a friend too!
@docf.n.t.23104 жыл бұрын
You video was very professional, and informative. Maybe the best Floyd Rose video I have seen to date ! Now I am heading to your website...
@scottishbawbag3154 жыл бұрын
Just bought a jackson randy rhoads with terrible paint job, stripping it down, changing to active. My first floyd rose. Really glad I found this video. Took the scary floyd monsters away. Cheers
@TomsToolRoom5 жыл бұрын
Its so Awesome to see how you use the tool! Great video GP!
@SkyscraperGuitars5 жыл бұрын
Tom, you do an incredible job of working with the crazy designs I come up with and turning them into the best luthier tools available on planet earth. I constantly get comments about the quality of the SSG tools and you are the reason people's jaws drop when they open their packages. I couldn't make these tools a reality without you.
@JoeAse3 жыл бұрын
The diagonal set-up of the tremolo springs, in this video allows them to maintain a higher tension of the outside springs, preventing the need to tighten the screws excessively or adding a fourth spring. Many luthiers recommend this approach to spring set-up. Great video! Thanks for offering your tools to the world!
@JD-vj4go2 жыл бұрын
Everytime I've tried the diagonal setup with three springs it's causes tuning issues when using the Floyd. I see it so often but I've never got that to work.
@TomGlander3 жыл бұрын
Just bought that intonation tool from your link. Looks awesome! Got your ebook, too. Great stuff. Thanks for making this available. Subscribed.
@SkyscraperGuitars3 жыл бұрын
🙏 Let me know if you have any questions and I'll be happy to help. Rock on! -Greg
@pbboeye1012Ай бұрын
Just started watching this vid - man, this is how you do it. Lay out all the tools, give a brief explain of them. As a former mechanic, I appreciate this greatly. Looking forward to the rest of it, and I will buy your tool for sure (pretty small - wish it came in a case or bag or something). Also subbed up.
@lroy7303 жыл бұрын
That's a nifty intonation tool. But I stopped using feeler gauges years ago. It's much quicker to just use two fingers one at each end of the fretboard and you could see the relief. I don't you string height measurements either. I lower the action until it buzzes. Then I bring it up until it stops buzzing. That's the maximum lowest action. I call that the Billy Sheehan method, he made it popular .
@BruceFlutes Жыл бұрын
You Sir, are the man! So love the tools, the process you shared is spot on for me, 5-5 on FR Trems. Invaluable...EVERYONE! Support this guys knowledge, buy something!!
@davidjoy29514 жыл бұрын
I'm sure you hear this a lot , but fantastic video. Extremely informative , very well paced and professional. Why can't more youtube videos be like this???
@SkyscraperGuitars4 жыл бұрын
DUDE! You just made my day!!! Thank you for taking the time to reach out and share your thoughts. I am a huge YT consumer, so I try to put content out there that I would like to see. Rock on! -Greg
@TonyPjamas6 ай бұрын
This becomes an easy job with the right tools! Thanks for putting this together - just purchased a set from you!
@SkyscraperGuitars6 ай бұрын
🙏🧡🙏
@cutler5685 жыл бұрын
About to install my first floyd rose in a washburn g - iv so very glad I've found your video. Thank you.
@SkyscraperGuitars5 жыл бұрын
Good luck!
@angelc79844 жыл бұрын
cutler568 which was burn do you have?
@thefilthygringo92283 жыл бұрын
Awesome, such a good resource. incredible tools
@jackson23636 ай бұрын
Hey man thank you for this video and making such great tools. I bought the intonation tool and blocks and it enabled a dummy like me to get it set up.
@SkyscraperGuitars6 ай бұрын
Right on! Glad to hear it!!! Once you know the steps, it's pretty easy to get these contraptions playing perfectly.
@jjjanco60213 жыл бұрын
I'm new to setting up my Ibanez w FloydRose type trem... wish I'd watched this 2 weeks ago! Purchased the intonation tool and fret rocker today. Live here in Westminter. Thank you Thank you Thank you!
@SkyscraperGuitars3 жыл бұрын
Good luck with your Ibanez! The edge system is one of the better trems out there.
@BibleBeltBlues3 жыл бұрын
Stupendous...thanks much....never saw anyone put strings on "backwards" so to speak with the colored metal loop ends on the head.....cool....may try that.
@bnc92613 жыл бұрын
I just purchased a used Ibanez JS100 in great condition - EXCEPT for the Floyd Rose set-up, that was almost unplayable. Greg's video, plus his tuning blocks, made the major part of set-up really straightforward. The intonation tool that I also purchased from Skyscraper is obviously of really high precision quality. I've not previously dared tamper with intonation, but with the right tool, it's easy!Thanks Greg, for helping us simplify maintenance, and focus on PLAYING! Cheers!
@SkyscraperGuitars3 жыл бұрын
🙏🧡
@ill76er115 ай бұрын
Thanks dude! Your tutorial is top notch!
@tommyapplegate303 жыл бұрын
Can't wait just purchased finally I can adjust my Floyd without guessing thank you & yes I cuss they key.
@angusyoung95944 жыл бұрын
Bought the little intonation tool. Very well made and does exactly what it says on the tin. Thank you.
@SkyscraperGuitars4 жыл бұрын
🙏🧡 Thank you!
@angusyoung95944 жыл бұрын
@@SkyscraperGuitars I'd like to state again, because it's not really evident from the video, just how well this little tool is made. Tiny little thing, but beautifully machined, you just want to take it out of the packet and hold it when it arrives.
@MrJeffGCU3 жыл бұрын
Very cool. Just purchased your intonation tool and wedges. Thanks!
@SkyscraperGuitars3 жыл бұрын
🙏🧡
@60sfoley3 жыл бұрын
Thanks for that, I’ve never used a block before on my floyd rose, so it’s a game changer for me.
@SkyscraperGuitars3 жыл бұрын
Hopefully this technique will start to take away all those years of frustration!
@juliodefreitas1572 жыл бұрын
Awesome video. And thank you for sharing your tips..💙👍
@whitsixkiller4 ай бұрын
Your video and tools make dealing with a Floyd Rose almost fun. Bravo 👏 sir.
@SkyscraperGuitars4 ай бұрын
🧡🧡🧡
@DanieleTurani4 жыл бұрын
Pretty cool intonation tool! Looks much easier to use and sturdy than the classic one.
@ant_yep4 жыл бұрын
I really like your routine. And I'm definitely going to get this tool. Thank you! I learned so much. Subscribe & liked 👍
@DMDvideo104 жыл бұрын
Love this tool! Just ordered it and a block!
@SkyscraperGuitars4 жыл бұрын
Thank you! 🙏
@AdamMGrubb19793 жыл бұрын
Wow bro you do everything exactly the way i do so crazy like your style
@anthonylumpkins Жыл бұрын
All this time and I never thought to block the trem before tuning up. I sold two amazing Floyd equipped guitars because of the never-ending tuning dilemma when all I had to do was block the trem. This video is a godsend!
@SkyscraperGuitars Жыл бұрын
Glad the video helped! Time to grab another FR equipped guitar!!!
@Guitarnivore3 жыл бұрын
I've struggled with Floyd Rose style tremolos for so long and have sold guitars simply because I couldn't get them set up and tuned properly on my own. I bought a new Ibanez with a double locking trem, followed your instructions (with my own makeshift block) and got it set up perfectly. Thanks!! I'll be buying a proper block for my guitool box. I''m going to recommend this video to anyone and everyone.
@imoffendedthatyouareoffended Жыл бұрын
Well glad to have you back on the dark side, I feel the pain but I never sold my guitar, my jem jr is now 8 months old I started playing 10 months ago. After buying my jem jr it’s been a massive pain in the ass. It’s been “professionally set up” twice. After the last time a few days ago I thought everything was good, it wasn’t until the next day the intonation was off again. Replaced the strings, adjusted the truss rod, adjusted pickup height and action height of the strings and had to take apart the internals and found springs stuck under the pickups not even on the screw posts to raise the pickups. The pickups aren’t level still, can’t tell if the guitar needs a little chipping away in that specific cavity or if it’s caused by the faceplate. What I do Know is that with them basically all flat against the guitar it’s fixed a lot of shitty sounds like the G string sounding like a damn banjo. Idk why or how I’ve put up with this when I’ve got 2 guitars that are way brighter quality but just suck to play because they don’t feel good in my hands. The schecter is close to my Ibanez but the neck is slightly thicker, but the main issue is that I drop tuned it and all the songs the app uses are drop d or eb. Probably for the best. It’s way easier coming up with Melodie’s and rhythm with my drop tuned guitar. Just feels so natural, my gretsch just weighs a lot and makes me not wanna touch it either. My fender acoustic I only use for recording specific parts but I hate that fender or any fender for that matter. Every fender thing I own is broken except the acoustic. But I just don’t enjoy acoustic playing. The sounds are lovely but it lacks everything I enjoy about guitar.
@RuffNRuffer4 жыл бұрын
I just purchased a Schecter Reaper 6 with a licenced Floyd Rose and a BC Rich Mockingbird with an original Floyd Rose. I have always played Les Paul guitars so the Floyd has been a nightmare for me. I saw this and purchased the kit just over a week ago and cannot wait until it arrives here to me in the UK 🇺🇸🛫🛬🇬🇧
@davekiddie44672 жыл бұрын
I have one of these and I'll have to say it works like a charm.
@SkyscraperGuitars2 жыл бұрын
🙏🙏🙏🧡
@Garbagebrain694203 жыл бұрын
Great video man. I bought the intonation tool and the trem blocks and set up my dean ml using this method and it came out great. All my buddies want me to set up their Floyds now lol
@SkyscraperGuitars3 жыл бұрын
Awesome! You now have the blessing/curse of knowing how it's done!!! I can't tell you how many friends I've helped out over the years... Its amazing how easy it can be to take a guitar from o.k. to outstanding.
@Garbagebrain694203 жыл бұрын
@@SkyscraperGuitars agreed thanks again man 👌
@jerryjohnson5753 жыл бұрын
great video I was going crazy with my Floyd rose on my avenger extremely helpful
@SkyscraperGuitars3 жыл бұрын
Good luck Jerry! If you run into any trouble, just reach out.
@i8ittoo4 жыл бұрын
Nice Kramer. Had a 84 , with rounded head stock tip. Candy apple red. First good guitar i ever owned. I I wish you go more into detail on how you set your intonation
@jlightning2178 Жыл бұрын
Didn't know you can buy those blocks now, always made my own.👍🤘
@ericste-marie26304 жыл бұрын
Thanks, nice tips! I have an Edge Zero II trem but you give very good tips. I could think of two advantages of having the springs straight, but I honestly don't believe it makes a noticeable difference in the sound. Like you say, you explain how you do it. Thanks again!
@Commander_Grub Жыл бұрын
I've heard of some people doing that, but I don't understand why. I see you have an option, because the holes are there, but what difference does it make having the springs straight?
@ellg5278 Жыл бұрын
I’ve been doing it wrong. It worked , thanks for the video!
@SkyscraperGuitars Жыл бұрын
Glad it helped!!!
@Buckswoodshop5 жыл бұрын
Right on GP!
@SaylorDollar3 жыл бұрын
Thank you! Just ordered some goodies from ya~!
@SkyscraperGuitars3 жыл бұрын
I just saw your order come in. We will be shipping everything out to you later today! Thank you!!! 🙏
@patrickdow75343 жыл бұрын
Great video, thanks!
@jefferycarter17917 ай бұрын
Loved the video
@mikemullenix13775 жыл бұрын
This is an awesome video! Just what i needed. I just broight home my fender squire stagemaster with dual bucks. Nice sounding git-fiddle and plays well too. Took forever figuring out how to change strings and tune it back. 😒 but I won! Will your intonation tool work for mine? It appears it will. Oh my tuner is the tc electronic poly tuner which has a strobe function. As well as my tuner of my tc electeonic bh250 which is also a pretty soild tuner. You opinion on using those?
@thefilthygringo92282 жыл бұрын
The trem block is incredible. If you don’t have one …. Get one it’s super helpfully
@SharpEdgeStandardOfficial3 жыл бұрын
I been doing setups since about1993 and seen many done and watched hundreds of videos and I could never do setups accurately unless I do the entire job in playing position on my lap!! Gravity pulls and playing position is best
@zimbo3655 жыл бұрын
Awesome video, GP! Makes me wish I had a Floyd equipped guitar.
@SkyscraperGuitars5 жыл бұрын
Thanks Aaron. Maybe you can add an FR equipped PRS to your hoard!
@ttguitarstringstt15502 жыл бұрын
Thanks for the info!
@PhilMoseleyMusic4 жыл бұрын
Great video and really cool guitar! I just got one of the new SM1 models and they're fantastic, although 1988 is my birth year so that makes yours just that much cooler! :)
@SkyscraperGuitars4 жыл бұрын
I love my Stagie. The new SM1s are every bit as nice as the vintage models. I was going to pick one up, but I couldn't justify having two of them.
@brettsjoholm3 жыл бұрын
Best tutorial for this I've seen and to the point. Too many 45-60 minutes videos I've watched where they don't even touch on intonation. This is great. And your intonation tool is out of stock on your website. Do you know when more will be available?
@SkyscraperGuitars3 жыл бұрын
Thanks for the kind words! We have a batch of intonation tools on their way to anodize right now. We should have them available in about 2 weeks. You can use the contact form on our website and I can put you on the notification list when they are ready. (sorry, YT doesn't allow DMs anymore...) www.skyscraperguitars.com/contact
@dangerousandy4 жыл бұрын
Nice video. I’ve just got my first FR equipped guitar (a Squier Stagemaster V1) and it desperately needs setting up
@5000rgb3 жыл бұрын
Floyds are great once you know how to work with them.
@EagleOfDestiny15 жыл бұрын
when checking for neck relief make sure to put the capo on at the first fret and not push at the last fret as some fretboard have a slight decline near the very end (rule of thumb 1 fret before the last fret)
@TheAxe4Ever4 жыл бұрын
EagleOD1 I like to put a capo at fret one the press around the 18 fret. Or where the neck meets the body.
@thefilthygringo92283 жыл бұрын
OMFG this is awesome!
@skydog4393 Жыл бұрын
Thanks, I appreciated this video enough to order the intonation tool and I just received it today. It's going not make intonation that Floyd Rose a lot easier. The Floyd does have it's advantages on my PRS Custom 24, but sometimes I wish I had just put a Bigsby on instead.
@blgdinger32 жыл бұрын
That Skyscraper gizmo you created seems like the only logical choice to do this process. I wasn't entirely sure what to do with adjusting that little bolt on the saddle, then somehow moving the saddle forward/backwards appropriately without it flying away lol. I've changed strings/tunings to the point where I'm in bad shape as far as intonation. My hardtail guitar is so simple with only 1 easy screw to adjust :p
@StanleyGrant133 ай бұрын
I just ordered the intonation tool.
@MickSammonsMusicWorld3 жыл бұрын
Just ordered a trem wedge, excites to put it to use 😁
@SkyscraperGuitars3 жыл бұрын
🙏🧡
@Lonewolf23-264 жыл бұрын
Would like see you set up a peavey Wolfgang special! I tried putting strings on it for the first time and I screwed the action up on it can’t get it back the way it was
@kid_tyrant66.64 жыл бұрын
I just a zippo and a Allen wrench to block the bridge, something I always carry.
@careycummings99994 жыл бұрын
Excellent video! I've had a Floyd guitar(Jackson reverse dinky) for 25+ years, and its nice to learn a new trick or two about easier ways to set them up. One thing I've always wondered. On "regular" guitars with a bone or plastic nut, people always go on about filing and setting the nut height. With a Floyd, its steel, and you never see anyone adjusting the height. Are they just that accurate because they are machined? Also, mine doesn't have that extra bar behind the nut, and now I see why I need one. When I put new strings, I put the fine tuners all the way out, then 1 turn in because after tuning and all that, when I tighten the nut locks, it makes the note sharp and sometimes I have to turn them out. That extra bar probably prevents that by keeping the strings flat against the nut. I will definitely be using your "ball end on the tuners side" technique. Genius!
@SkyscraperGuitars4 жыл бұрын
You'll find shims under a lot of FR nuts. The nice thing for factories is that they don't have to file them, so as long as you are consistent with production, they should all sit perfectly on the neck. Over time, they don't wear nearly as much as a bone nut since the strings are clamped. As for the clamps and going sharp. The key is "snug". You don't have to make the clamps tight, just snug. It takes very little pressure to keep the guitar from slipping out of tune. That said, I always plan on the strings going just a tick sharp... Tis the nature of the beast. Take care and thanks for the great comment!!! Greg
@johnsimms39573 жыл бұрын
The biggest problem I have with my Floyd Rose is the B string always seems to buzz in its locking nut groove. I can't seem to remedy it. Here's a tip from me about changing strings. I find changing one at a time is best. For example: De-tune the old bass E. Then take it off. Replace with the new bass E and re-tune. Then take the old A off replace with the new A and then re-tune. Etc.
@jeffalfred57854 жыл бұрын
I have some of the products and love them
@edgararcega30463 жыл бұрын
So I have this ocd where i just love seeing things in order. Today o got my guitar that i stashed years ago. I saw that the small intonation thingamajigs we're all uneven so I made them all flush. Boy i did not know what a shit of a mess i did when I made those adjustments and that's why I am here now.
@snocrushr5 жыл бұрын
Cool, now I know what those things were for that Tom was makin' 👍👍
@SkyscraperGuitars5 жыл бұрын
Yes Greg. Tom does an incredible job machining everything for SkyScraper.
@DanPellegrino486 Жыл бұрын
I did a "setup" from stock 9s to 10s doing the see-saw and spring dance once. Don't know how I finally got it, but I did. I'll never do it that way again though. I wanted to throw my new guitar out of the window. Just ordered a set of the blocks now, and I already have my Pick Pocket tool ready.
@metal_helm3 жыл бұрын
You are almost at 6k subs! pre-congratulations! someone just bought the pickpocket off of my amazon affiliate links! \m/ \m/
@SkyscraperGuitars3 жыл бұрын
Holy cow! I hadn't been paying attention. 👊
@TMoody4 жыл бұрын
Cool video..... killer Kramer.
@blgdinger32 жыл бұрын
6:26 man I don't care what anybody anywhere who has played or worked on guitars for at least 90 years will say, I truly think having the bridge slightly pulled like that is the best way to have your floyd setup. It, for whatever reason, seems to stay in tune the best for me. I always adjusted the claw to bring the bridge plate parallel with the guitar body, but it somehow has not been as reliable as keeping that slight tilt to have an extra little edge on the strings. Maybe it's because my string saddles kind of point upwards, so this evens things out. I have a Floyd Rose Special, btw.
@Bikewithlove2 жыл бұрын
I agree - I also prefer having the bridge in that position. I also took a chance on the Fender Tremsetter, and was not disappointed. The Tremsetter used in combination with an authentic Floyd Rose locking nut keeps the strings in perfect tune no matter how much or often I use the tremolo. I’m using a custom installed ‘licensed’ Floyd Rose with no issues. As long as the locking nut is the real deal, and you use a Tremsetter, an $18 Floyd Rose works out fine.
@koreano99236 ай бұрын
clear explanation thank you sir
@jose8311174 жыл бұрын
Nice video!!!!!
@imoffendedthatyouareoffended Жыл бұрын
Lmao, thank you man. I bought the tool months ago when I started playing, I watched a video but forgot everything. I was trying to figure it out last night and I gave up xD. I spent 5 hours fixing every issue after paying a professional to set up the guitar twice. It’s a jem jr yes I know it’s not a true jem but it feels perfect and now that I’ve sank my time into fixing it properly it’s sounding so much more proper. The only issue I’m currently having since I knocked everything else off the list was intonation, it’s a bit flat on the bottom and a bit sharp at the top. I started playing for the love of god by Steve vai and I noticed that my sound was pretty far off from what it should be. I raised the action a little more and had to put all the pickups down flat. It’s the only way, the guitar is definitely a bit fucked but over the past 8 months she’s almost fully fixed. I wouldn’t suggest a jem jr unless your willing to take on a heavy task that may or may not be done when you get the guitar. I know it’s not the guitar tech being a moron, he set up my schecter diamond series hellraiser c-1 fr and it’s all proper and perfect. The pickups in my jem had springs for the screws not even attached, just held to the underside of the pickup by the magnet. The pickups were also angled forward and backwards and the tech never fixed it. All I can say is if you have the time do it yourself, take your time. Doesn’t matter if you know anything about it or not. Watch videos as your doing one specific thing and maybe 5 hours maybe less or more and you’ll have it set up. Also for the springs, it depends on the player and the guitar. Sometimes you need a bit more tension in the middle rather than the sides. My schecter needed them slanted and only 2. The third one was causing an issue and 2 let it return back to neutral where before it would stay sharp or flat depending on which way you pressed the whammy bar. I went and just watched a 40 minute video of Steve vais guitar tech to get the setup close to his so I could make adjustments as needed. Made all the difference.
@Living_EDventures3 жыл бұрын
I recently bought one of your intonation tools
@SkyscraperGuitars3 жыл бұрын
🙏🧡
@kevinjudson4 жыл бұрын
Excellent and informative videos....can u give me some advice?... i always seem to get this problem when restringing my 22 fret guitars and the problem is that the strings seem to have a lot of tension when bending a note?...i dont get it on my 24 fret guitars?...i use 9 gauge strings...thanks in advance.
@laguanhayes2144 жыл бұрын
Thanks for this video. Thanks also for the FREE e-book. I saw another video like this with the sustain block's tension springs being adjusted and voila, it's in tune and intonated. I must give you higher marks for depth of instruction and production value of your video. Besides being mesmerized by that cool tuner, why did you tune/intonate with the old strings, get rid of them, then start again with new strings?
@SkyscraperGuitars4 жыл бұрын
I always "rough in" the setup with old strings if I can. That way I know if everything works before I blow a new set of strings. Also, I can play the guitar after the adjustments and see if there is a high fret or something else that will need repair. If I changed the strings first, then I'd have to throw them away if I had to take them off for a fret repair... I usually rough in, then change strings, then let the guitar sit for a day or two, then go back through everything and make sure it's still happy. I hope that answers your question!
@AleArzMusic3 жыл бұрын
Subscribed!
@crashdummy403 жыл бұрын
I have the same issues when bending strings lol. They all out all the time.
@bruceohio3 жыл бұрын
Great tutorial! Buying the pick pocket. no way am I wasting more time on intonation
@SkyscraperGuitars3 жыл бұрын
If you have any questions, just reach out! 🙏🧡
@ziggassedup5 жыл бұрын
My guitars are on stands and collecting dust too Greg..lol...I'm diggin' the intonation tool mate but won't work on the Jackson licenced Floyd Rose...Have a good one mate.
@SkyscraperGuitars5 жыл бұрын
Thanks Ziggy!
@clemguitar635 жыл бұрын
Always a good idea to stash away a few of those seldom used 2.5mm Allen Wrenches!
@SkyscraperGuitars5 жыл бұрын
Yes!
@RotterStudios2 жыл бұрын
GREAT VIDEO! I LOVE that intonation tool! Where can I get one? At your store? I have been using a tiny hammer to gently tap the saddle forward. This is so much better. subbed.
@SkyscraperGuitars2 жыл бұрын
Yes. We have them on www.skyscraperguitars.com/store. If you have any questions at all, just reach out. There is a contact form on the website and the questions come directly to me. -Greg
@angrytroll273 жыл бұрын
15:50 just put an eraser under the bridge to hold it in place its a lot easier then pushing the bar down while trying to put the strings in
@5000rgb3 жыл бұрын
Good tip! Last time I used the tapered wood shims you get at the hardware store (they're actually for fitting windows into a framed wall), they are soft wood and bridge across the rout. I'll try your eraser trick next time.
@angrytroll273 жыл бұрын
@@5000rgb No worries good luck mate! Also take not of where the guitar is tuned with the eraser under there
@HarleyCampbell793 жыл бұрын
Cheers from Greeley CO
@SIXX27725 жыл бұрын
Cool video
@arnyarny774 жыл бұрын
i just purchased a guitar fitted with a floyd, i am getting this for sure do you recommend installing a trem setter on a floyd?? i personally installed on my other guitars with vintage trems
@T0n3zon34 жыл бұрын
Hi.I Like the look of the intonation tool. Do you ship internationally (UK)?