Sliding Lid Boxes - Laser Cutting Tutorial
Рет қаралды 19,151
Күн бұрынThis tutorial shows you how to make a laser cut box with a lid that slides out using engraved slots. We'll use a Cuttle template to make a box of any size and any material thickness. We cover material recommendations (MDF core), machine settings (including our recommended settings for Glowforge), assembly, and how to test your own materials to engrave a slot to the perfect depth.
Box with Sliding Lid cuttle.xyz/@cuttle/Box-with-S...
Engrave Depth Tester cuttle.xyz/@cuttle/Engrave-De...
Find more templates at cuttle.xyz/templates
Cuttle is a web-based design tool for laser cutting. cuttle.xyz
Materials and Supplies (contains affiliate links)
- Boxes are made out of Glowforge's Medium Maple Plwood shop.glowforge.com/products/m...
- Olfa Heavy Duty Utility Knife amzn.to/3F3UR4u
- Plastic Scraper amzn.to/41OrH2Z
- Wiha Pliers amzn.to/3mwKy2t
- Pentel Graphgear 1000 0.3mm mechanical pencil amzn.to/3JiCU4A
Social
- KZfaq / cuttle
- Discord cuttle.xyz/discord
- Instagram / cuttlexyz
- Twitter / cuttlexyz
Contents
[00:00] - Intro
[00:47] - Choosing the right Plywood
[01:18] - Engraving Tests
[02:06] - Checking for MDF-core
[02:42] - Project Parameters
[05:32] - Glowforge Settings
[06:37] - Assembly
[07:50] - Outro 1
[08:30] - Testing Engraving Settings
[11:13] - Outro 2
#lasercutting #glowforge #crafts #diy #boxes #plywood
@Cuttle Жыл бұрын
Sliding Lid Box template: cuttle.xyz/@cuttle/Sliding-Lid-Box-bPw6EKhxgyMd This template is free for the next two weeks (until March 21), then it will become a premium template.
@Solergo Ай бұрын
This is such a life savior. I am so emotional to have found this video.
@loribrooks6736 Ай бұрын
This is exactly what I want for a project I am making. I enjoy watching your videos Federico...Thank you for sharing your knowledge!
@Olivia-xf4gy Жыл бұрын
This is SO so helpful!! Thank you so much!!!
@carrion_pigeon Жыл бұрын
Super excited about Engrave Depth Tester. I've been working on a box with a similar groove and this is going to speed testing up so much.
@Cuttle Жыл бұрын
Yeah! Engraving is such a time-consuming operation so being systematic will save a lot of time in the long run.
@shavygameplays2391 Жыл бұрын
this was exactly was I was looking for, thanks a lot
@anthoservais3351 Жыл бұрын
Thanks from France, it was very helpful ;)
@playamytrumpet Жыл бұрын
Thx for sharing, I’m for sure going to use this app
@wiljones07 Жыл бұрын
Love the sliding boxes. You and Toby do a great job on these videos.
@wolfCatworkshop Жыл бұрын
Thank you so much! 😊
@qariasad1 11 ай бұрын
Great Job brother. I really appreciate
@richardneal3841 2 ай бұрын
I found your video informative in that I didn't know that some woods use MDF in the middle? Thanks, I'll check for that....
@beqwaam Жыл бұрын
Top video, top idea!!
@Cuttle Жыл бұрын
🙌 Thanks!
@nicolevasquez2000 Жыл бұрын
Thank you so much Federico - brilliant! I hope to try this tomorrow!!!! :)
@Cuttle Жыл бұрын
Cool! Let us know how it goes 🙂
@nicolevasquez2000 Жыл бұрын
@@Cuttle perfect - got it in one go
@onsapplikasies8620 Жыл бұрын
Great video.
@Cuttle Жыл бұрын
Thank you!
@max.bittker Жыл бұрын
cool :)
@ob1coyote 7 ай бұрын
If you want to sidestep the issues with burning that groove accurately you could use a mini router, and you could even construct a mini router table to make it easier. This would also free you up to use any material you want.
@artistrobfuller Жыл бұрын
Thanks so much - I recently bought a pro membership and appreciate the outstanding tools provided - however, I'd love to see a box-making template that utilises a living hinge framework if possible. I'm not technically minded to create one from scratch myself just yet so a template would be fantastic!
@Cuttle Жыл бұрын
Sure! Do you have something specific in mind for a box with a living hinge? I can imagine, for example, the bottom is a rounded rectangle, and the vertical edges of the box are then curved using a living hinge. Perhaps the whole thing has a top that goes on and off like the Heart Box. -Toby
@artistrobfuller Жыл бұрын
@@Cuttle Absolutely! You could apply the living hinge framework to make heart shaped or even rounded boxes too! In fact I'm sure you clever lot could allow users to choose from a selection of shapes in the template if you wanted to!
@Cuttle Жыл бұрын
@@artistrobfuller I appreciate the suggestions! I'll add this idea to our templates queue. Keep the ideas coming if you have any more! -Toby
@artistrobfuller Жыл бұрын
@@Cuttle I will do - thank you for your consideration!
@TheSolderingGuy007 6 ай бұрын
Would this work with acrylic as well ? Wondering whats the best way to create acrylic boxes with sliding/snap close lid.
@iq0099 6 ай бұрын
will it work on Diodes?
@wiljones07 Жыл бұрын
OK, Frederico, how about boxes with dovetail tabs!
@wolfCatworkshop Жыл бұрын
Haha, I love that. It would be really cool to be able to angle the laser beam, probably complicated but cool.
@alekseyinjapan 9 ай бұрын
@Cuttle Hello. Is it possible to make a box template with different thicknesses? I mean the thickness of the box lid will differ from the thickness of the box walls. For example, the base of the box will be made of 9 mm paulownia, and the lid will be made of 3 mm plywood. In this case, not only the thickness of the engraving will be recalculated, but also the height of the side walls of the box. Thank you. with respect to you, Alexey
@Cuttle 9 ай бұрын
While we don't officially support this on this template, I think you could do it with a bit of a hack on the settings. First you'd set your base box dimensions and material thickness (9mm). Then, in Advanced, there is a setting engraveTolerance. Normally this makes the slot slightly larger (by 0.2mm) than the lid's thickness. But since you are using a thinner lid, we can set this negative: in your case 3mm - 9mm + 0.2mm = -5.8mm. Finally, increase lidLip until you have your slot where you want it. By eyeballing the preview, I set it at 4mm and it looked about right. I haven't tried this and can't guarantee this will all work, but just wanted to get you this info if you want to go "off road"...
@alekseyinjapan 9 ай бұрын
@@Cuttle Thank you very much. That helped. I had to manually modify the layout a bit in CorelDraw, but it was easy. With a negative value of the groove width, the size of the front side (which is the smallest without a groove) will be larger by the thickness of the top cover.
@davidgruty Жыл бұрын
What laser cutter machine are you using?
@Cuttle Жыл бұрын
We're using a Glowforge Basic in this video, but any CO2 laser cutter should work for cutting and engraving a slot into ~1/8inch thick MDF-core material.