Can-Am Ryker "Keyless" Duo Glove Box Lock

Рет қаралды 38,013

Күн бұрын

Пікірлер: 16

@Fousticle 4 жыл бұрын

The cable should be tied into the barrel of the lock, such that when you turn the key to unlock the parking brake it also disengages the glovebox lock.

@reaper331983 4 жыл бұрын

Thank you

@OntarioAndrews415 4 жыл бұрын

Cool.

@xrpirate536 3 жыл бұрын

WOW!

@Frank-vo9xo Жыл бұрын

Mine comes with a locking Trunk but this seems like a big waste of time because if you walk up to any riker gives the hood a little pop when you're with your fist they all open anyway

@sanosam 4 жыл бұрын

Not safe if you're parked at an incline, cause you have to shift out of park to unlock.

@Slingmods 4 жыл бұрын

Hello Sano, releasing your parking brake on a hill is NOT a good idea. We offered this product because of how many people requested it. We have our "keyed" glove box lock at the link below, which does not combine functionality with the parking brake lever and is a perfect alternative for avid hill parkers. www.slingmods.com/canam-ryker-keyed-glove-box-lock

@DoRC 4 жыл бұрын

Looks sweet though I see an issue. That crimp on eye looks like an electrical ring terminal and judging by how it got deformed in the video I'd guess it will be a weak link in the system.

@Alexio735 3 жыл бұрын

you did not show where the eye gets attached to? so it just hangs loose?

@Slingmods 3 жыл бұрын

Wow.. I can't believe we didn't show that in the video. Lol. It attaches to the T30 torx bolt that's under the cover. Let me know how it goes.

@MrInternationalSound 4 жыл бұрын

🤝🏾💯💯💯💯💯

@jnftw95 2 жыл бұрын

will this work if i have the electric lock installed? Cuz my electric lock is broken

@Slingmods 2 жыл бұрын

I was assume that it would not, as this lock kit was designed for installation on bikes "without" a lock previously installed.

@lanejones3491 4 жыл бұрын

Did not work for me, could not get the cable tight enough to lock.

@rgoldsmith286 4 жыл бұрын

Did you end up fixing this? I imagine you could cut off the crimped eye (at the parking brake side) and shorten the cable at that end to make it tight enough to work.