Can-Am Ryker Keyed Glove Box Lock Install

Рет қаралды 19,340

5 жыл бұрын

Can-Am Ryker Glove Box is located at SlingMods.com here: www.slingmods.com/canam-ryker...
The factory Can-Am Ryker doesn't have a lock on the glove box. This allows would be thieves to take any personal belongs you may leave behind. We felt this issue needed to resolved so we now offer a push button glove box lock that blends perfectly with the factory matte body panels of the Ryker and includes 2 keys.

Пікірлер: 29

@stevenV57 4 жыл бұрын

One more thing that should be installed in the factory!

@39830000 Жыл бұрын

Agreed

@MrInternationalSound 5 жыл бұрын

I like the idea, but not the look.. maybe if it was flush with the lid

@Slingmods 5 жыл бұрын

Thanks for the feedback.

@cbullock4551 5 жыл бұрын

Yea looks like u can use a flush cabinet lock instead

@Punkhonda1 5 жыл бұрын

I see a flaw. If u twist the lock the whole thing will turn. The hole shouldn't have been round. It Needed a flat side so it would be able to be twisted. But it is better then what CAN AM gave us

@Slingmods 5 жыл бұрын

Hey Nate, there's a torsion nut on the backside of the lock to keep it in place along with a lock washer.

@CenlaSelfDefenseConcepts 2 жыл бұрын

Wish I could get one of these keyed the same as the parking brake lock

@Slingmods 2 жыл бұрын

That would be cool for sure.

@croomcas Жыл бұрын

Will water get in?????? Seems to me the water will leak inside if left out. I bought it but it's way too flimsy for me so I guess it's a paperweight now.

@Slingmods Жыл бұрын

We've never had a complaint on water getting in. If you'd like to return it you certainly can. Please contact our Customer Service Team at your convenience here to initiate a return: www.slingmods.com/index.php?route=information/contact Thank you!

@tomasalvarado4823 4 жыл бұрын

I bought the lock but the instructions don’t specify if we’re supposed to put the latch pin back. Are we supposed to?

@Slingmods 4 жыл бұрын

Hello Tomas, you don't re-use the OE Latch pin as the new lock uses the 90 degree locking tab provided with the kit. Thanks!

@carlosmriverajr2 3 жыл бұрын

Hey guys, I justed bought the same item from some who got it from slingmods but he didn't have both templates, went to your web side for instructions but no temples. Is there any way you could help me get my hand on the original templates?

@Slingmods 3 жыл бұрын

Hello Carlos, no problem. If you could please email our support team here: www.slingmods.com/index.php?route=information/contact We're more then happy to get you the template you need sir. Thank you!

@nickwebster9886 4 жыл бұрын

Slingmods, can i please get instructions and templates for this please.

@Slingmods 4 жыл бұрын

Hello Nick, the instructions and template should have been included with the product. Here's a link to the instructions: www.slingmods.com/pdf/can-am-ryker-frunk-lid-lock-install-instructions.pdf-v2.pdf

@llcmax7853 5 жыл бұрын

I have to order this one

@keithgreene2469 3 жыл бұрын

I did not get any instructions or either template with my trunk lid lock. Can I find that info somewhere or can someone tell me the measurement to the center of the hole ? Thank you.

@Slingmods 3 жыл бұрын

Hello Keith, there should have been a paper template included with the packaging. If you did not receive that..I can contact the manufacturer to mail you a copy of that. Please let us know. Thanks!

@keithgreene2469 3 жыл бұрын

@@Slingmods I would definitely appreciate the paper templates or measurements. What would be the best way to give my address ? I prefer it doesn’t go public. Thanks for your help. Looking forward to your response.

@Slingmods 3 жыл бұрын

@@keithgreene2469 100% Agree on that. Can you please send us a support ticket here: www.slingmods.com/index.php?route=information/contact so that we can keep your contact info private and get you a copy of that template. Thank you!