It’s a good day when woodness goodness uploads a new video 🎉

Gman, Just a thought, get you a 5 gallon bucket and put in your spare screws, nails, tape measure and your snacks and water, tie a rope to it and then climb up the scaffold/roof, that way when you think you have forgotten something, just pull the bucket up so you don't have to do your leg workouts so often :-D

Get some firewood cut asap up there ASAP! Having a little fire going while working outside in the cold is a big morale booster.

Oooh! Let’s go, putting on the big screen to watch

Just redoing my roof…… reminding myself it’s cheaper than going to college…. 👏 😂 Felt that deep inside my loins! Much love 🌲 keep it up!

The scaffolding is like The Giving Tree. Great work man, thank you for the 30 mins 😍

New to your channel, have been watching this series religiously. In this video, you appear to not be your jovial self as in other videos. I hope you and yours are well! Thanks for blessing us with another fine video! Greetings from Germany 👍

“Where would I be without you?” - simple! On the ground.

You have inspired me to start building my own cabin with my wife! We are learning too as we go. Thanks for the videos

Love the shots and ASMR-ish portions of the video! Great job with the cabin and good to see you!

Happy 🇨🇦 Thanksgiving G!! Woodness Goodness and leftover 🦃 for dinner. What could be better? 🍴👍🏻

G, I'm just coming to the end of 18 months renovating my house. Just got those easy finishing off jobs to do but can't be bothered. Gonna wait until this cabin is finished first 😂👌

Holy woodness hammeralldayness baby!! Damn son I am exhausted just watching you all by yourself. I give you credit brother because it is tough to do all that work by yourself. It is turning out great and I can’t wait to see what you do next. Keep getting after it big G. Keep hammering away.

Looks like u had smooth day today! Hope the rest of the project goes smoothly!

It's looking good man!

Get it!!!!!!Not bad for a Semi-Professional Amateur!!!!!

Great going buddy. Canada is proud of you. Take care! 👍

I see now that I could never do a project like this even though I work in a frame shop so I think I could… But even if I had the time and all the materials, I can’t stand heights! I get dizzy on a step ladder 🤪 Great work Dr Woodness!! 👏🏼

“Now it’s safe again” 😂😂 yeah bud.. love the videos!

It's coming along nicely! Good stuff. Hope you had a good Canadian Thanksgiving.

Hey I'm in Indiana to born and raised been watching your videos enjoying them

Love watching you man! Keep up the great work.

I am, in fact, left handed. My husband is right handed. We work well together on stuff like this lol. also @13:55 that hammering is quite musical.

I missed all the arrival and the tractor scenes! I know you’re busy, so thank you for uploading. I’m building my own offgrid sauna cabin project, and I dread editing.

Graham, outstanding as usual. You work your ass off to make these videos and it is much appreciated. 👍

So look forward to these videos.

Dude this is so AMAZING

Yeah buddy you got her now!

Keep up the good work

Maybe adding some blocking in your walls would add strength to them.

Awesome job mr woodness 👍

Happy (belated) Canadian Thanksgiving from Canada ;-)

Hola amigo, que gran trabajo haces y todo ello con tú cámara a cuestas. Es todo de mucho mérito. Me encantan tus vídeos. Gracias y muchos ánimos....

Soo inspirational ❤❤❤

New lens? This one looks particularly good. Keep it up, loving the series!

Looking good

Happy 🦃! Amazing progress.

Good work …the framing looks great, it's coming together ! I think you are doing ok, hang in there man ! It's tough working by yourself. Just a little at a time, so you stay safe up high, doing all the roof areas. I have a lot of respect, for all the people I see building mostly by themselves. Take care

Maybe try using that table as a sawhorse?

Awesome sauce!! 🖐😎👍

Firstly great to see you back. We All need a break and let’s be real. What pays the bills and family should always come first. Now for a tip that an old carpenter taught me. When using a hammer put your thumb on the top of the handle along the spine so to speak. Gives you far better control. Takes a bit to get use to but works a treat. Rarely get a miss hit or glancing blow.

Amazing 💪🏻

Always a good watch! Thanks!

I know it's been a lot of setbacks and re-dos, so it was so satisfying to see the pan out at the end of the whole structure with walls (well most of them!) and a roof. It's really starting to look like a cabin now, and it will just look more and more like one with each day of work. Great job banging out the bones of the roof today... I was impressed you lasted as long as you did with each heavy piece of wood you had to haul up and nail in by hand! By the way, do you generally prefer to work with a hammer and nails over your nail gun? I assumed you left your nail gun at home but it made an appearance at the end when your arms were getting tired, so made me wonder.

Now that the scaffolding have served its original purpose I would suggest to repurpose it for a couple of sawhorses:)

Big milestone on your project! Congrats!

Love this build. Really gets me fired up to get after it

That was a John Wick style reload on the nail gun!

Anther great update! It’s looking better every day you get at it for sure. Happy Canadian thanksgiving to you and your family from Ontario, and always stay safe out there- Cheers!

Nice

Way to go bud. Fewer jokes per 60 so we could tell you were just focused on enjoying the work. Be careful when you start sheathing.

Sawhorses. Screw some scrap timber on your oversized Christmas tree, or on your existing bracing. Done!

The house is looking great so far!! Why don’t you just make some saw horses out of wood

Canada!

Nice! Felt for you installing all these hangers by hand. Would have been nice having a palm nailer but I know you don’t have that luxury with no compressor.

I totally expected you to try moving the scaffold while yo top. Maybe hanging onto ridge board and kicking it over... Lol

Time for fun

How high do you think you have climbed if you sum up all of the times you've climbed your scaffolding?

excelente

I thought you raised the ridge beam up the same amount that you raised the wall top plate up when you doubled up the top plate? It appears your rafters are proud of the ridge beam by about as much as that top plate thickness. Are you going to fill that space somehow with a scarp piece of wood along the entire length of the ridge beam? Love following your builds. Thanks for the great content. And I love your personality, too. Such a joy to watch.

Should the center beam of the roof be beefier ? I would have nailed 2 boards together.

What Virginia mountains? Beautiful!

Are you blocking and sheathing those roof trusses directly or putting purlins up and doing a tin roof? Such an epic location you have there! Enjoying this series!

Happy birthday buddy! is your father bob?!

As a fellow Virginian where is you property located at. One day I would love to do what you’re doing

That isn’t a tractor. It’s a combine, a harvester.

Hey rando question about the land and building regs/codes. What are the limits for the county you’re in? Where I’m at it’s a poultry 120 sqft before a bunch of red tape kicks in. Love the channel dude! Happy 🎃 🇨🇦

unacknowledged pun alert: "budget cuts" bro, budget .... cuts! 😅

Don’t dis on Canada bro,,❤️🐸

What percentage of time is spent setting up the shots vs. actual building time? I've often wondered how much the filming slows down (or doesn't) the progress.

Becareful, first risking life and limb solo; now bugs in your loins. I','m not sure how this cabin will end. :)

Are your roof rafters going to be exposed?

Did you get a construction permit?

do you think I can do that with vertigo/meniere disease lol

I have Acrophobia, so it was really hard to watch from your point of view at the top. Don't know how you do it.

Combine is the wrong color it should be RED😂

You should ,when you’re filling up your tires, not put the valve stem cap in your mouth …..and, oh yeah, buy gold.

Graeme shouldn't your shrit say"Woodfather"?Don Graeme

Why are you using a hammer in 2023 😆