Line boring JCB 416s steering pins with a mag drill.

Рет қаралды 50,758

Күн бұрын

Back at it with the home made line boring machine to sort out loose steering pins on a JCB 416s
So after 11 years of use and several thousand hours of work the pins have worn the mounting holes in the chassis.
Tight space but a reasonable job to do. Line bore out the worn holes, machine up some new bushes and press into place. All without having to split the machine.
0:00 Intro
0:28 Remove steering ram
1:55 Set up line bore
2:29 Set bar up in milling machine to drill more tool holes
4:00 Line boring
5:56 Press bushes in
9:30 Cummins cold start
9:52 Start on side 2
10:53 Explaining DIY line boring set up
11:59 Line bore 2nd side
12:25 Make bushes in Lathe
17:39 Press bushes in
19:54 Weld bottom bush in
20:57 Outro
Hope you enjoy the video!
Don’t forget to like and subscribe.
Thanks for watching!

Пікірлер: 137

@daftDAFdriver Жыл бұрын

Love this channel, no drama, detailed commentary and explanation while doing the job Well done 👍

@snowballengineering Жыл бұрын

Much appreciated!

@michawrzask8168 10 ай бұрын

normal people back in fashion again !!!

@Watchyn_Yarwood 8 ай бұрын

Agree 100%!!

@normanbuchanan9710 Жыл бұрын

one of the things I appreciate about these videos is no music drowning out the sounds of the actual work being done ie the machines etc.

@Watchyn_Yarwood 8 ай бұрын

Me too! Many other YT creators could benefit by doing same.

@peterattfield4342 Жыл бұрын

This is one of the two engineering channels I watch. The other is CUTTING EDGE AUSTRALIA.

@timtrax918artisan8 6 ай бұрын

For me this is the first time I've seen vertical line boring while in the machine. I'm sure its not new but i got to see it on this episode.

@mourne Жыл бұрын

Brilliant video. Great to see a highly skilled engineer at work.

@snowballengineering Жыл бұрын

Glad you enjoyed it

@rogerwiseman8711 Жыл бұрын

I would have thought replaceable bushes should have fitted in the first place. But that aside a job well executed.

@Watchyn_Yarwood 8 ай бұрын

I hope JCB engineers are watching, they could definitely learn something from Oliver! Like, maybe, replaceable bushings?

@Ivc406 Жыл бұрын

Hi, the farming community in you're area must think you're a magician 😂 no job is easy,but that's what makes us come back for more,regards ⚙️🚜🚜

@beyondmiddleagedman7240 Жыл бұрын

Didn't take long to get to top notch content. I hope the channel grows! Keep up the good works.

@snowballengineering Жыл бұрын

Much appreciated!

@joconnor3567 2 ай бұрын

Love your channel. I am following from Chicopee, Massachusetts. Hope are charging enough for your especially talented work. And that doing so enables you to obtain the equipment and facility you desire.

@sjv6598 Жыл бұрын

Tidy repair job, I’m impressed with your lineboring set up. Us Yorkshire lads know how to improvise 🙂

@snowballengineering Жыл бұрын

Thanks, certainly do!

@V8PropaneBurner 5 ай бұрын

Nice job there. I agree that mag drills aren't ideal for line boring. I borrowed one from a mate to bore the king post on my mini digger - way too many RPM. I'd been watching Kurtis do enough line boring jobs to give it a go myself.

@BruceBoschek Жыл бұрын

Another superb video and excellent repair job. It looks as if JCB should have bushed those mounting holes at the factory. Replacing bushes is less of a job than line boring the holes. Thanks for your efforts to share your work. Greetings from Germany.

@thomasmacpherson5236 5 ай бұрын

Great video Olly very interesting keep the good repair work going well done mate.

@torstenbrunke4026 Жыл бұрын

nice work. I wish I had someone like you for my excavator.

@glennmoreland6457 Жыл бұрын

I'm Yorkshireman n all... Good video ☹🇬🇧

@ScrewDriverxxx 10 ай бұрын

Good grief. That looked impossible... Top job.

@OFW Жыл бұрын

Looking good! I would be happy with that repair. I like the simple line boring setup.

@snowballengineering Жыл бұрын

Thanks! It’s cheap and cheerful

@miniripper Жыл бұрын

Awesome. Good work buddy. There’s hope for the youth!

@matthoward923 Жыл бұрын

Something tells me you don’t have a heated shop. Working in the cold always makes it harder. Nice job

@snowballengineering Жыл бұрын

No, outside temperature is inside temperature 🥶

@theessexhunter1305 Жыл бұрын

Very good, I get some tools destin to the scrap from a friend tip tools reams etc, next time I will save them and drop you a line.

@SCORPASRULE 11 ай бұрын

Well done, exactly what it says on the tin. I thoroughly enjoy this gentleman’s vlogs, keep it up. 👊🏻👍🏻😎

@snowballengineering 11 ай бұрын

Thanks, will do!

@daveanderson2865 11 ай бұрын

Awesome. I hope you patented the design flaw for those JCB's. Bushes should have came from the factory installed. Pretty new machine as well.

@gerryboard6615 Жыл бұрын

This is a common problem. Should have been bushed from the get go by the OEM. Good fix, nice camera work too.

@snowballengineering Жыл бұрын

Thanks 😊

@tomivy1052 Жыл бұрын

that is a really great quality job. most want to split the machine , but your way really looks awsome !!

@snowballengineering Жыл бұрын

I dare say if it went to a dealership they’d have split it and then had to hire in an external company to do the line boring. Thanks!

@jimsvideos7201 Жыл бұрын

Thank you for all the time it takes to film a job!

@snowballengineering Жыл бұрын

Thanks for watching, makes it worthwhile

@petefletcher Жыл бұрын

Good content! Audio's better than your first efforts too 😀

@snowballengineering Жыл бұрын

Thanks!

@swanvalleymachineshop Жыл бұрын

Nice one . We use expander pins at work for that purpose , but those bores were a bit too flogged out for them . Great job . 👍👍👍

@johncone9516 Жыл бұрын

Looks like a bit of operator negligence, a lesson in the use of a grease gun might help.

@kaseycoleman993 10 ай бұрын

@johncone9516 how do you grease the joints he rebushed? The cylinder pivots on the center of the pin. Those holes that were repaired dont move

@brendancopsey4216 6 ай бұрын

A reet job 👍

@ls2005019227 Жыл бұрын

Excellent repair and video! Thanks for taking us along.

@snowballengineering Жыл бұрын

Thanks for watching!

@Agirhydro23 Жыл бұрын

Good job , you can send these bushes to be hardened .

@crawfic1 5 күн бұрын

Very good Job, not easy to do that. Fair play very clever

@jeffreid3386 Жыл бұрын

Nice job. That’s using your noggin. Nice. Plan and simple.

@AW-Services Жыл бұрын

Great video. Quite a tricky and confined space repair. Love the self made line boring setup with a mag drill and bearing plates. You would of definitely struggled setting up and using a conventional Sir Meccanica system with the drive unit and controller.

@snowballengineering Жыл бұрын

Thanks. Yes, it would have been a struggle. Just needs refining some now.

@AlwaysBored123 6 ай бұрын

Very cool. It's encouraging to see that you can get a good surface finish feeding by hand with this method.

@alanremington8500 Жыл бұрын

Nice job !!

@fridaynightgamefilm Жыл бұрын

Nicely done!!

@smev4341 Жыл бұрын

Perfect job. Just the right amount of everything.

@snowballengineering Жыл бұрын

Thanks!

@fabs3771 Жыл бұрын

Really Great Job 👍🏻

@frank64409 3 ай бұрын

I enjoy watching your post!

@stovepipe666 Жыл бұрын

Good job

@James-hx4nm 10 ай бұрын

Super job , very well thought out repair . Great detail in the video.

@kentuckytrapper780 8 ай бұрын

Excellent job man, great video.

@globalsurfer 10 ай бұрын

Excellent...

@jasonneedham6734 6 ай бұрын

Well done mate.😮😊

@edswider9309 10 ай бұрын

Oh don’t forget Tim b at sea another professional

@camerondadams Жыл бұрын

Great work in a really tight space :)

@snowballengineering Жыл бұрын

Thanks!

@delboy321 Жыл бұрын

Great videos , could watch all day. 👍

@snowballengineering Жыл бұрын

Thank you!

@lovejcdc Жыл бұрын

Excellent job man

@snowballengineering Жыл бұрын

Thanks!

@kenwood8665 Жыл бұрын

Great video well done

@snowballengineering Жыл бұрын

Thank you!

@stevefromlondon9175 Жыл бұрын

Great job you make it look easy good editing Regards Steve UK London

@zaankhajjak Жыл бұрын

Very Nice work

@snowballengineering Жыл бұрын

Thanks!

@frankroeleveld4438 Жыл бұрын

better than new , vakwerk💪

@edswider9309 10 ай бұрын

Exactly plus the people are well rounded in there field they talk with experience not in circles

@maddiec.3212 Жыл бұрын

What material did you use for the bushings? What rpm does the mag drill turn? It’s nice to see real life jobs, not a KZfaq studio where everything is perfect.

@snowballengineering Жыл бұрын

I used en8 steel for the bushings. Not sure what rpm the mag drill does but it’s too fast really.

@dand5593 Жыл бұрын

@@snowballengineering yes, i think it will be easy to add an of the shelf standard pwm module for it

@Iskandar211 Жыл бұрын

Good job sir

@snowballengineering Жыл бұрын

Thank you

@TheDaniels5s Жыл бұрын

Nice job! 👌

@snowballengineering Жыл бұрын

Thanks!

@ÁREAJ27 3 ай бұрын

Olá amigo gosto do seu trabalho, com as tècnicas empregadas em seu trabalho!!! Abraço e boa sorte sempre!!!

@jacquesdor50 Жыл бұрын

Subscribed. Nice and clear shots show what you are doing. My only ask is as you have a quiet voice I need to turn up the volume but then the music is really loud. Look forward to more vids. Thanks.

@jacquesdor50 Жыл бұрын

Actually, this comment was meant for the grader vid. Sorry!

@nmccw3245 10 ай бұрын

Umm… your mag drill bearing definitely prefer pushing to pulling. 😁 Nice work Oliver! 🇬🇧👍🏻

@jimg7784 Жыл бұрын

Looks very cold in the shop. I told the people over on Cutting Edge Engineering to check out your channel about two weeks ago, maybe it will help.

@snowballengineering Жыл бұрын

It is at this time of year 🥶 Thanks! My analytics say I get a good amount of traffic from some of their videos.

@janharpershea2359 9 ай бұрын

An elegant solution to a problem which shouldn’t even exist, if the original design/build had recognised the loading on these points - perhaps the ‘top-hat’ bottom bushing could have a wider ‘brim’ and be held in place with 3 cap screws, just to help if you need to renew the bushes in a couple of years?

@richardmills5450 8 күн бұрын

I cant believe sum have commented on the music...WOW. Nicely done job mate. Did look near impossible but well done. What size did you finish the bush bore? Any alllowance for crush ? Cheers

@davetaylor4741 Жыл бұрын

Starting to see a pattern here of under engineered JCB's. Your improvised tools do the job. That is quite a small mag drill. Could you step up with a bigger better mag drill set up. Rather than the huge cost of a proper line borer. I watch the big dedicated line borers on CEE on KZfaq all the time. With welding attachments and all sorts. Make some big money on KZfaq and then treat yourself. Amazing now how many people live off their video earnings.

@snowballengineering Жыл бұрын

Yes, could do. I just used the mag drill we already had for one job and it’s lead to using it more and more. I’ve got a better 2 speed motor with variable speed I’m planning on using to make a more advanced set up. CEE line boring rig is the dream!

@davetaylor4741 Жыл бұрын

@@snowballengineering The workshop of CEE certainly is something. They are based only about a 2hr drive from my house. Should I need their services.

@peem1244 Жыл бұрын

Hi AS, hope you're well. Really enjoying your videos. Is this a common problem with this type of machine or do you think this is a case of poor/incorrect material or quality control? Poor maintenance? Maybe impossible to tell actual cause and I suppose fixing the problem better than new is the important thing. Thanks for sharing. Stay safe and keep up the good work.

@snowballengineering Жыл бұрын

Just one of them things that wears out eventually. That’s why line boring was invented I guess. Thanks for watching!

@charlesmiles9115 Жыл бұрын

😊😊❤👍👍

@TheGrimReaper1 8 ай бұрын

If this film doesn’t make farmers or drivers grease up these machines i don’t know what will.

@patricktyra7316 Жыл бұрын

that home made rig of yours looks like about the only one that woul of fit , the other line boring set ups i dont think woul have fit

@snowballengineering Жыл бұрын

I think you’d of had to split the machine in half to get a go with some on the professional set ups.

@barney2633 Жыл бұрын

Excellent all round !

@snowballengineering Жыл бұрын

Thanks!

@keith0alan Жыл бұрын

I hope you explained to the owner that grease is cheap compared to the repair.

@olivierlemoine867 3 ай бұрын

😉👍🤙👏🏼👏🏼

@madman2666 Жыл бұрын

throw the bearings in the freezer for a day or more.

@stuartandrews4344 Жыл бұрын

liquid nitrogen quicker.

@an04ker Жыл бұрын

Where about in Yorkshire are you? I repair forklift trucks I sometimes get a few axles want bushing and boring I’m in wakey 👍

@snowballengineering Жыл бұрын

Not far off York. You can email me at: Oliver@snowballfab.co.uk if you need any doing.

@MotoRestoFL 11 ай бұрын

Is that coolant in your spray bottle regular flood coolant the water soluble oil type?

@snowballengineering 11 ай бұрын

Yes

@andrewrobinson2869 Жыл бұрын

Speed of the drill seem very fast ?😊

@snowballengineering Жыл бұрын

Yes, too fast. But it only has one speed 😏

@matthewmarquette6778 9 ай бұрын

???Wonder why it wore the front but not the rear

@ordinarymiracles5959 Жыл бұрын

What causes the excessive wear on those pin holes? Thanks.👍👍

@snowballengineering Жыл бұрын

There has to be a small amount of tolerance to let the pin fit. Over time the pin moves back and forth in that tolerance and slowly wears it.

@dykehead1 Жыл бұрын

Have you ever rebushed the actually pivot part?

@snowballengineering Жыл бұрын

I haven’t no

@dykehead1 Жыл бұрын

@@snowballengineering Needing my Terex done.

@ianlitchfield9273 7 ай бұрын

Your a clever lad 👍 just subscribed so I hope that helps you ?

@snowballengineering 7 ай бұрын

It does, thank you

@panchasnyk8895 Жыл бұрын

why it happens - its seen that it was greased properly

@snowballengineering Жыл бұрын

Maybe too much tolerance when new and the pins slowly worn the hole

@joze8722 Жыл бұрын

Why don’t they use roller bearings?

@snowballengineering Жыл бұрын

To help keep the price of the machine more affordable I’d imagine.

@brownsuspenders7793 Жыл бұрын

Here CEEs newest how to! kzfaq.info/get/bejne/pZpkorqC2dOue3k.html

@snowballengineering Жыл бұрын

Watched it earlier today 👌🏻

@91rss Жыл бұрын

great stuff Is it always that cold over there you have to wear winter clothes in a shop? and someone told us that they only use dewalt tools over there.

@snowballengineering Жыл бұрын

It’s 18c today 😁 but back in February it was between 0-5c and sometime below, the workshop has no insulation so it was pretty cold. I use dewalt mainly because my local shop sells them but never had any problems.

@91rss Жыл бұрын

@@snowballengineering I wondered if it gets cold or if it snows there. I see where vehicles rust there bad like up north so they must put salt on the roads too .

@schmatzek1 Жыл бұрын

Line Boring Drehzahl zu hoch.

@snowballengineering Жыл бұрын

Yes, but mag drill only has one speed

@HansWeberHimself 22 күн бұрын

Put some pants on Homeless? What else could you do?

@parkerbirch5286 Жыл бұрын

I subscribed until i heard the fkd up music you play. WHY?????????????????????

@snowballengineering Жыл бұрын

50 seconds of music to cover up white noise in a 22 minute long video.

@Critical_Stinking 9 ай бұрын

50 seconds is well out of order.... I was going to ask you to repair something in my fleet of plant. But now?? No way.. I'm forever scarred by your music choice.