Thanks again, Adam. It's always a pleasure to sit in your classroom!

Thank you Adam . Also thanks to your employers for allowing us a glimpse into your world . A place that allows our world to function A F Pienaar Johannesburg

Adam - you make it look so easy! Those surface finishes are so good on the turned parts. I like to see ‘real’ engineering. Thanks for your time to share this with us. John

Thanks for another fine video! I really like how you talk through each step. Those of us who learned from lesser gods can pick up clever hints and things that can be done to improve our projects. Great editing with a stable camera stand to boot!

Adam, You have shown the tip to shear off the sharp edge in a mill vise before and I have used this tip. I made a bunch of stainless spacers to modify my jerky slicer to cut thinner strips. Thanks for the tip! it works great.

Always a enjoyment to watch you turn....and mill...have a great weekend Adam

I am amazed at the level of skill that you possess. Every video that you present teaches me something new! Many thanks, sir.

Nice job Adam, thanks for sharing your work and tips.

Really enjoyed this episode Adam. Thanks also for being a guest on the podcast and for sharing your work with us.

The 'before & after' images always amaze me! You do good work, thanks again Adam.

Sets and clearly explains the excellent work -I find it fascinating to watch and also learning of proper standards. . Many thanks for great work. Cheers

Thanks always a pleasure to watch a professional. I wish I could have seen you find the location of those equally spaced holes.

Amazing machining work Adam. Enjoy your vids always

love watching you on the big pieces!!! keep up the great work

Real pleasure following this cannel mate...one of the best machining if not The best machining content on the Internet.

The finish on that pillow block casting was gorgeous. Thanks for another Saturday night. :)

I love hard work, I could watch it all day!!

Adam - love your vids. You are keeping American ingenuity and know-how alive.

Great video Adam! I Really enjoyed your home shop machinist podcast and look forward to your return visit. Thanks for your very kind words. ATB, Robin

I fell out of touch with the channel for a while but I'm now in the middle of binge watching all the previous content. Yuss!! Glad you're well, sir. I'm glad the channel is growing and doing well.

Hi Adam it is a real pleasure watching your

Horizontal mill - impressive machine!

I listened to the blog and enjoyed it very much. I feel like I know you better, not any different to whom I always thought you were but better. It was interesting hearing you talking about your video making and how you are so passionate about the process (I imagine you view a finished video not unlike a finished piece of machining work). Believe me, I understand how much work goes into what you create for your youtube followers and I admire the quality of your work, you have a great talent, it's no wonder you have so many people following your channel and I'm glad to include myself among them. Peter

13:30 nice rotation protection Adam, I shudder to think of that jumbo shaft slipping under drilling torque, nice! Enjoyed the time on the boring mill, thanks.

I've been working the knobs for almost ten years, I hope to be half the machinist you are one day.

Adam, thanks for joining Justin and I on the podcast, we had a great time! Great SNS, this one was packed full of awesome horizontal boring mill work. :-) Oh and I also really like those screw machine drills and use them pretty often.

Thanks for uploading videos of machine shop work.

Great work, Adam. Keep it up.

Speaking of holes being drilled...... I drilled the smallest holes I have ever drilled yesterday. They were .010 in dia. Used a "Servo" brand mini drill and a microscope. They were in a new valve body we are building. Talk about pecking away at something. Like you I got it done. Another great video Adam. Glad Motion will let you film again.

Thanks Adam . I agree Robin is awesome.

your videos are just awesome adam I gotta get a computer with hdmi so watch instead of satellite cable. love the stuby drills the boring mill jobs are always entertaining.complex set of holes there lot of tools lined up on the tool board lot of tool changes I sighed just looking at it. love it . new shops getting pretty close cant wait myself keep it up adam

very cool share Adam ! Enjoyed ..

Wow, never saw that done. That is a great thread job.

I really enjoy the HSM podcast. They've had some great guest hosts. Highly recommended.

Nice job Adam.

Good video. Hope you get things rolling smoothly with the concrete pour.

Another great SNS Adam !

I have a full set of fraction, number and letter screw-machine length drill bits. If you have a smaller than ABOM size mill, they are extremely useful for big things where you don't have a lot of room left over when you clamp it to the table. They are also really nice when you power tap because they are not much longer than the tap, less knee or head travel when switching bits.

I'm sitting here watching you and I really appreciate you hand tapping the bolt holes I thought that all young guys stopped doing that LOL lol LOL lol I appreciate your quality of work

Simply outstanding video's! I'm hooked!

Great content as always. Cheers Adam

I watched many of your videos, they are not professional but it is clear that you are a perfectionist and you do some work of grade 20

Love the HBM action. I wish I had the room for one.

I really enjoyed the voice over stuff in this video! I wouldn't mind seeing more of that!

outstanding deep bore & taping

Fascinating to watch .

The Noga Mists come with two hoses and and output. The hoses are both 1m long, one is your air intake and the other is the siphon hose. Noga sells a 2m hose as well. For me the distance from the head of the Bridgeport to the tank was a bit more than 1m so I was always fighting to have the tank in the right place. I ordered the 2m hose from MSC Direct, took a while as they had to special order it from Noga but the did deliver it after a while. The 2m doesn't work as well because of the distance of lift but it did allow me to position the tank up off the ground behind the Bridgeport which works nearly flawlessly. Also, if you have an unheated shop, remember that the coolant can freeze so you might need to take the entire system into a temperature controlled area.

I enjoyed it Adam.

Great Vid Adam! Guess this is part of the "Second Shift". LOL Enjoyed it man, keep up the Great work.

Perfect,as always !

great job adam

Great SnS. Nice work on those deep holes, they can squirrelly fast if a bit starts to wander. Adam I wanted to thank you, a few videos ago you mentioned a book you use for reference "Pocket Ref" by Thomas Glover. I purchased a like new copy from an Amazon used book seller for $7.00 including shipping. Fantastic book, packed with tons of assorted info. I'm constantly adding to my automotive, metalworking and machinery library and its a great addition. Thanks for sharing.

I would get fired for taking that long to do that job. You are truly blessed my man.

Very nice work

The hole pattern job eat up about a day of time on the Kearns . I like to see the boring mill at work because I have one also Thanks Adam

super duper job as always

I've used the kool mist 77 and 78 for years. The 77 tends to leave a bit of a gooey build up on ways and what not when you mix it rich.. but it's a great product.

Good video Adam

been waiting for another great video great thanks adam

I'm a vibe guy and it amazes me to see huge steel shafts and I have to remember that shaft has a geometric center and a center of mass and they are rarely in the same location. At resonance that shaft and everything it's connected to becomes very loose. Some of those shafts will grow and contract with the heat of the day, with some the difference is in inches of growth or contraction. Plus the shaft bends into the load zone. Hard to think of a 12" or 24" or 36" shaft bending, but it does, hard to think of them becoming as loose as a noodle but they do in resonance.

I really enjoyed the podcast. Nice chat there. Cheers!

Some very nice work and nice jobs.

I see a lot of YT machining community members quitting making videos. Or at least slowing down. I really appreciate you still keep going. I always have great time watching your videos. Keep up the good work!

Hi Man. You are great. Congratulations.

Legend in his own time.

Another good job

Ich kann mich echt totlachen wie gut dass er das im Griff hat und das ist echt speziell leute wenn ihr jemals jemand an meine Maschine gestanden habt ist er der Beste

Thats a good lucking shaft! My [;ates I am making for my HBM are 4140 and it works out nice.

Very cool brother and thank you for all you do fo r us

I hope you're proud of your work. I'd certainly be proud to run your parts in my equipment.

Crazy skills.... Awesome

Great video and skills

I went out tonight to find a deep hole to tap. Joke's on me because I didn't get any and here I am watching Abom vids again.

...That Trinco Blast cabinet...that stuff is top quality...don't give it away...!

Get spotting drills for hole starters, they usually have a slightly larger included angle than normal drill for perfect centering. Extremely short or just shorten to suit and in some places called "NC drills".

Thanks for the video.

Ever do a cast iron sharps receiver? 29mm-2.5 metric square thread. Sounds like fun and a challenge for our old equipment..

Looks like a Gatling gun barrel from the end LOL. Nice work.

Hola Me gustan mucho todos los videos y los trabajos tan bien echos un abrazo des de muy lejos .Huelva. Andalucia.España.

Hi Adam, love your videos & the work that you do, thats some gearbox shaft, dont know if its possible on any of the work that you do, but would be great to see the item/s installed so we get some idear that they are used in.

outstanding!!!

Abom i think you'll like this ! Abon size !!

I use MSCdirect.com and a little McMaster. I think they are the two giants. I love the use of that indicator, I have one and thought it was only for the mill. Wow nice classroom.

That was a cool angle 😎 👌 it looked like a big ass cylinder for a 10 round revolver..... lol 😆... the-- cal abom79...

cheers Adam

Adam, Another great SNS! Thanks! When will you and Abbey be making another weekend drive/video segment? Thanks, again. Have a good one! Dave

Impressive.

As an FYI for us Kanukistani, yes the promo code works in Kanukistan!

I wish McMaster shipped worldwide!

Adam: I really enjoy your videos. You are a sharp contrast with our family engineering company where we specialize in making orthopedic titanium implants using CNC exclusively. It's great to see your craftsmanship. I grew up in Pensacola during the '60s. I remember Runyon's Machine Shop (spelling?) downtown by the water. They were kind enough to machine a part I needed for the local Science Fair for free! I worked summers in college at the Naval Base in weapons engineering where I saw one of the first brand new NC machines. My last summer I worked at Westinghouse in manufacturing engineering which by that time had several huge NC machines. I never dreamed that I would start a CNC shop. Technology has come a long way! I still have family in town which I see occasionally. When I am in town - if you are agreeable - maybe I can come by and say hello. Bill Box Miami, Florida Mark Two Engineering, Inc. www.marktwo.com

That babbitt alloy makes quite nice chips

good video

The 19mm A-bom mag...shoulder fired revolver..... huh... omg that would be no joke....

You had me at “deep hole tapping”🙇‍♀️🤰

Hey Abom... Nobody want that blaster :D ..... hehe... it's the never ending story :D

Just started watching this vid after cutting some veg for tea, including red jalapeno chilli...itched my left eye and now crying!!......Back soon when left eye stops chilli-crying.

I'm surprised these guys didn't come up with a better design for this part. But then again it's good for business why change it😉

thanks

You should do a quick vid on just the blast cab so people can see exactly what you're selling and it's condition/gremlins. I think you'll get more credible offers for it that way.

Nice!