SolidWorks Tutorial | How to create Threads on a Bolt M10 - EXPLAIN

SolidWorks Tutorial | How to create Threads on a Bolt M10 - EXPLAIN - step by step

Рет қаралды 164,588

8 жыл бұрын

This video is created to help students and beginners to learn how to create threads on a bolt in a very advanced explanation giving a strong tutorial based on real actual life.
Datasheets were found by Mr Jon Rackley at the University of Wolverhampton in 2016.
Big thanks to my teacher Jon Rackley because he gave the chance to the students to learn how the threads are actually designed on a bolt.
-Jon Rackley LinkedIn profile:
/ jon-rackley-77892611
-Facebook Page:
/ solidworksedu-17497614...
-Instagram profile: @SolidworxEdu
: [^_^] [ DOWNLOAD FILES] [^_^] :
. Download . - SOLIDWORKS BOLT FILE + BOLT DATA SHEET
form.jotform.com/221136800804446
. Download . - SOLIDWORKS NUT FILE + NUT DATA SHEET
form.jotform.com/221136800804446
. Download . - SOLIDWORKS ASSEMBLY FILE M10 BOLT Vs NUT + TOLERANCES DATA SHEETS
form.jotform.com/221136800804446
. Download . - MASTER THE BASIC THREAD DATA SHEETS + HAND CALCULATIONS
form.jotform.com/221136800804446
. Download .- Machinery Handbook Threads 27th Edition
form.jotform.com/221136800804446
. Download . - Machinery Handbook Threads 1942
form.jotform.com/221136800804446
Watch also:
- How to create threads on a Nut:
• SolidWorks Tutorial | ...
-How to Assemble Bolt and Nut:
• SolidWorks Tutorial | ...
Keywords:
Thread tolerances classification
threads and tolerances
solidworks bolt and nut tutorial
bolt and nut assembly
bolt and nut tolerances
Internal threads
External thread
bolt and nut measurement
Bolts
Nuts
Screws
Bolt Thread Pitch
Length
dimensions
Iso standards
Bolts Nuts Screws Bolt Thread Pitch, Length and Bolt Diameter

Пікірлер: 124

@padbhanabharaju2814 Жыл бұрын

You way of explanation is soothing and understandable. Thank you for your effort

@lora3527 7 жыл бұрын

At last someone explains how to make threads properly, great job

@grnwthnv1 10 ай бұрын

Great video for all us that are still learning SolidWorks. A good drawing and a 3D printer can make wonders. Thanks.

@OLTLlvr 7 жыл бұрын

Best thread tutorial I've done. Thanks a lot.

@kailashdixit6251 4 жыл бұрын

At last I found correct way to cut threads. Thank you very much for this inspiring video

@lightamplifier6105 6 жыл бұрын

Thank you for your time and passion in teaching. Bravo!

@armandoanguiano4758 4 жыл бұрын

Thank you for this video. It was the video that made the most sense, and actually worked for me. This is the like 5th video i've tried watching about how to make threads in Solidworks 2019.

@1stMichaelMyth 6 жыл бұрын

Thanks you have the knack for teaching, simple and direct.

@thecrazykartbyAJ 7 жыл бұрын

Great video, well explained and step by step as the description says. Congratulations, good work!!

@gomesracer 7 жыл бұрын

Nice... You save me... Finally a proper explain... Thanks a lot! Cheers

@FarazArastu 7 жыл бұрын

Great video! I'm new to Solidworks and this helped a lot!

@surinderdhiman 4 жыл бұрын

Nicely explained. Absolutely and easily understandable. Thanks a lot for this amazing video.

@TDAnyadubaMScPhD 4 жыл бұрын

Thank you so much Man, your explanations and tutorials were very very easy to follow

@eddielai8831 4 жыл бұрын

Thank you very much for this detailed explanation!

@santanacasas1 7 жыл бұрын

Great Job Marios. This is the best explained video I ever see about how to make threads. Best Regards

@shagunsharma3369 7 жыл бұрын

Thanks a lot for the video. It easy clears all doubts.

@nikolassokratous7662 7 жыл бұрын

Keep going as you do my lovely friend. I'm proud of you.

@charlieromeo7663 5 жыл бұрын

Great tutorial on threads. Thank You.

@arvisplavnieks4166 7 жыл бұрын

Thank you, this is super useful, nicely done!

@nar_indra 3 жыл бұрын

Useful Vedio..so long I was trying to find this easy tutorial on threads. Thankful from india..

@mosesatanda8000 5 жыл бұрын

Good work. detailed explanation. Thanks !!

@murfelpurf5556 10 ай бұрын

Excellent. learned a lot. Love the detailed overview.

@hammich 6 жыл бұрын

Excellent tutorial, awesome work :)

@nasimkhan71 6 жыл бұрын

great video! you made it easy. thank you.

@Mechbalajilove 4 жыл бұрын

I really enjoyed ur step by step lecture

@CandyCane24 7 жыл бұрын

I'm proud of you.good explanation

@hanwin227 7 жыл бұрын

Thanks for ur video, quite clear.

@abdussalam3255 7 жыл бұрын

THANK YOU FOR YOUR GOOD INSTRUCTION..

@dorastavrinou8219 6 жыл бұрын

Excellent job!!

@vigneshnanthagopal1888 7 жыл бұрын

This Section is Very Useful for Me.. Did you Explain Trapezoidal Thread And Square Thread Formation

@aksilyoucef3609 6 жыл бұрын

it was beautiful very interesting thank you and good courage

@gasoline8441 6 жыл бұрын

Excellent video!!

@walid-meghch4100 6 жыл бұрын

great job man, thank you.

@thaliakontou3598 6 жыл бұрын

Μπράβο Μάριο!

@taufiqqurrahman4485 6 жыл бұрын

thank u so much ur video helps me a lot. much data not taught in vocational schools. and since I do not have the money to go to college, I work in a company, and they do not want to teach me how to read complex engineering drawings

@tonyjunior3278 5 жыл бұрын

Very nice Teacher !

@phonepyaeaung1030 8 жыл бұрын

thank you so much this helped me a lot :D

@igklim4439 4 жыл бұрын

Thanks a lot, really helpful and easily understandable.

@solidworxedu1035 2 жыл бұрын

Great to hear!

@jay7605 3 жыл бұрын

Brilliant. I can cut these on my lathe no problem as the carbide tool is already formed. 3d printing them is way harder. Great tutorial. Now i need solidworks.

@solidworxedu1035 2 жыл бұрын

Happy to see your comment. It means so much for our Channel.

@shuoyang5410 6 жыл бұрын

Thank you man!

@fatemehamini6884 Жыл бұрын

soo helpful thank you

@1920Shiv 2 жыл бұрын

Pretty good explanation 😊

@mounirmaayoufi4441 4 жыл бұрын

perfect work

@saz7351 6 жыл бұрын

amazing, thanks a lot

@manuellando2060 7 жыл бұрын

Thanks.so Much

@panagiotisnick7590 7 жыл бұрын

Awesome!

@zesegatto 2 жыл бұрын

Nice tutorial! Thanks! Some may use equations and define Pitch and H as global variables. Measures that use their values can be defined by a equation set on dimension box.

@solidworxedu1035 Жыл бұрын

Great tip!

@georgepapadimitriou4965 6 жыл бұрын

And now you know what K in G76 threading cycle means. It is the centre of the ark. Ωραιο video Marios Christodoulou συνεχισε την καλη δουλεια

@barnabyalvin6799 7 жыл бұрын

Excellent explanation. Can you upload some sheet metal product design ? Thanks

@RightPanel 7 жыл бұрын

Ευχαριστώ!

@alvinho5018 3 жыл бұрын

i had trouble on my first attempt using the "sketch fillet" feature. when i make pierce of the profile and the end line of the screw, the profile "FLIPS" on the other side. Using the 3 point arc on the other hand seems to have no problem at all. all in all, your video is great. kudos to you!

@solidworxedu1035 2 жыл бұрын

Dear Alvin, your comment is so valuable for us here at Solidworx Edu and Thank you. All of our students used to face same thing. The trick here is to fully select the sketch of the thread and drag it close to the point where you want to do pierce. NOTE: Don't drag it too close to overlap the pierce point but close to it. All in all, the best way to do it is the way that makes you feel more trusted to use.

@lanceblack888 2 жыл бұрын

Thanks 🙏

@solidworxedu1035 Жыл бұрын

You’re welcome 😊

@maddymafia 3 жыл бұрын

Thaaaankssss aaaa lootttttt brother❤

@solidworxedu1035 2 жыл бұрын

Please share for support!

@Goluthelab 4 жыл бұрын

Very useful video..

@solidworxedu1035 2 жыл бұрын

Glad you liked it

@carlofontana3677 8 ай бұрын

Hi, thanks for the video. Exixt a way to atomatize the NPT thread creation something like the wizard holes or part of a library? Thanks

@PePeAung 4 жыл бұрын

Thank Bro

@nurfatihahazman6895 3 жыл бұрын

Thank you so much Sir! Im new to Solidworks and this helps a lot ! Can you make a tutorial on the formation of thread design for the v -shape and reverse buttress thread ? Thank you so much in advanced.

@solidworxedu1035 2 жыл бұрын

Thank you for your comment. It means so much for our Channel here on KZfaq. Yes, I can do anything you would like but please be more specific. Please, send a picture or an attachment to get an understanding of what exactly you need. Our email is solidworx.edu@gmail.com Thank you again.

@missindianitya4174 3 жыл бұрын

Slow but veryyyyyyy helpful thanku from indiaaaaaaaaaaa

@hamadal-shuaili9909 4 жыл бұрын

Mr. Marios christodoulou. Thank you for the video. Its helpful. I was looking for some issues like ; what is the exact plane to start pitch shape and where should it placed " at tip, middle or root". Thank you again.

@solidworxedu1035 2 жыл бұрын

It depends. If I understand your question the answer will be that the correct point should be the middle because if you select it from the top you will get small in-depth threads. if you selected from the bottom you will get deeper than normal. Hope I have help and answer your question. Please If you need anything specific to present here in this Channel send an email with pictures and attachments of what you need us to do. Provide as much info as you can and send it to the following email.: solidworx.edu@gmail.com

@amirmaki7015 7 жыл бұрын

thank u

@malekmf7022 2 жыл бұрын

thanks

@solidworxedu1035 Жыл бұрын

You're welcome!

@guldan3547 6 жыл бұрын

Hi, thank very much for this video. Altough I have a problem. I am creating not normalized whitworth thread, so I have adjusted the cutting sketch to shape it. But SW doesn´t seem to like it, every time I select the sketch and helix and click OK, the error message pops up saying that it hadn´t been able to finish the operation. Can anyone help me please ? I can send the screenshots if needed. Thanks.

@zhongweimao5548 7 жыл бұрын

Hi, Nice video that really helps me a lot. Not like other tutorial, u explained how the dimensions of the triangular was defined, which is super awesome. my question is, how did you determine the 5/8 H, 1/8 H these parameters? where did you get them? btw, I don't understand why H=0.8633*P. Could you explain a little bit more about these? Thank you

@zhongweimao5548 7 жыл бұрын

Thank you so much for great explanation and valuable documents. Now I understand why H=0.866P, it is basically mathematic relationship of equilateral triangular (like you said Root of 3 over 2). It doesn't really matter whether we use 0.866 or root of 3 over 2, coz this is a practice. Anyway, great to hear explanation from you. but as your side video shot showed, that the radius of incircle of this equilateral triangular equals to 1/8 H, is this what your graphic illusion means? I calculated myself and searched on the web, and found that the incircle radius of equilateral tri is 1/3H, which is not 1/8 H. Can you provide me a better vision of your draft showing how these relationships were defined. sorry to keep asking you questions :p...just for learning. Thank you Marios, really appreciate your help...

@danwohlslagel1277 4 жыл бұрын

@@solidworxedu1035 Thank you so much - I was about to spend the next 2-3 hours proofing this out and trying to understand it and now I have something that I can at least print and then test with a real screw.

@BilalKhan-do9il 4 жыл бұрын

kzfaq.info/get/bejne/gp9pn9Fy1ryvYXU.html check this video to understand those reltations!

@SynOne-yh6rf 3 ай бұрын

When the thread profile is finished I select pierce but there is a conflict (18:39), but if I select coincident there is no conflict. I use Solidworks 2011

@titanas23 7 жыл бұрын

thx

@hridayamkrishnahore2964 5 жыл бұрын

sir can u make a tutorial on the nut as well

@stevenmills3874 4 жыл бұрын

@Marios Christodoulou - Do you have a PDF doc or something similar of technical the drawing your working off of?

@solidworxedu1035 2 жыл бұрын

www.amazon.com/Machinerys-Handbook-Toolbox-Franklin-Jones/dp/0831127007/ref=sr_1_5?dchild=1&keywords=manual+handbook+machinery&qid=1629997860&sr=8-5

@theHDRflightdeck 3 жыл бұрын

Nai olan!

@illiasamarskiy6196 6 жыл бұрын

Good tutorial! Please explain how you make the objects in solidworks look like they are made of metal and have nice reflections? I can't seem to figure this out... Do you use some sort of rendering? On my computer the all look simply grey with some shades... your input would be very helpful :)

@illiasamarskiy6196 6 жыл бұрын

Marios Christodoulou , thank you so much!

@muhammadibrar4515 4 жыл бұрын

Hiii.....sir during making threads you made triangle.....in screw case u make collinear but in nut solidworks case u did not make collinear..can u explain this please?

@tuanohuu3996 3 жыл бұрын

Thank so much. How can I find out the dimension of chamfer for thread, example, M130x3?

@solidworxedu1035 2 жыл бұрын

Mr. Tuan, We are happy to see your comment on our Channel. When you start a project you have information about the Bolt you want to manufacture. Such as diameter, length and pitch and for what purpose. We know that there are categories of tolerances between bolt and nut. Most common are the ''Fine'' Category and ''Coarse'' Category). For example a standard ''Fine'' Thread Bolts (Metric) bolt of M125 has a pitch of 4mm. This is standard value. So, In most cases you use the pitch value equal to the chamfer. In the case of ''Coarse'' Thread Bolts (Metric) bolt of M125 has a pitch of 6mm. So, here your chamfer will be 6mm.

@thienphan5872 4 жыл бұрын

That is good man and do you have any other about other theads ?

@solidworxedu1035 2 жыл бұрын

kzfaq.infoWVC5vrzgsL0 kzfaq.infokSi3H79GgKI kzfaq.info/get/bejne/n9SZasia2tmpXas.html kzfaq.infoini7eiusE-w

@bigwave_dave8468 2 жыл бұрын

Great video! - A question: at about 7:58 you state that the right-plane is on the end of the spiral path. However, it's not clear why the spiral path started on the right-plane to begin with. When I created a spiral on an arbitrary cylinder, I had to create a reference plane in order to make a sketch that is perpendicular to the end of the spiral (for the thread profile). Can you explain?

@solidworxedu1035 2 жыл бұрын

If I understand correctly your question the answer should be: You should create the chamfer at the bottom of the bolt. Then you have to select the bottom surface of the bolt and select sketch. Then you have to select the edge of the cylinder and select convert entities. There is no need to create any plane here. Then when you are at the helix and spiral option at the left hand side you have o set the starting angle at 0. By setting the value 0 your spiral line will be exactly on the right plane. I hope i answer your question. If not please let me know.

@bigwave_dave8468 2 жыл бұрын

@@solidworxedu1035 Thanks for your reply! Ok, the part I was missing was that the default angle for the Spiral on first attempt was 225 degrees, not 0. Setting the "Start angle:" to zero gave the expect behavior as in your video. Additionally: as a newbie, I was unfamiliar with the "Convert Entities" command - In Fusion 360, I think it's called "Project geometry" or some such thing.

@bigwave_dave8468 2 жыл бұрын

PS: I did try the thread tool but in my case, I need 45deg threads which are non-standard [so they can be effectively 3d Printed]

@solidworxedu1035 2 жыл бұрын

You can use the link below. It's the faster way to create threads in SolidWorks. kzfaq.info/get/bejne/hbyDeZaa2LmrhY0.html

@bigwave_dave8468 2 жыл бұрын

@@solidworxedu1035 Thanks again. -Dave

@y4nn746 2 ай бұрын

bueno

@jmonsta1992 7 жыл бұрын

can you make or direct me to a video that does a tutorial on a hydraulic punch press? thank you

@mihailucian409 5 ай бұрын

how crazy is metric standard compared to imperial,there everything is very easy and fast,you have the pitch the 55 degrees angle and that is it.here you have to draw gioconda.

@subinnair3835 6 жыл бұрын

Respected sir...please clear my humble doubt...in M10 sud'nt 10 be the nominal diameter instead of major diameter ? I feel that in the video you have taken 10 as major diameter instead of nominal diameter

@tofolAA 5 жыл бұрын

drive.google.com/open?id=1uygHO96ooBeiCz5hPJuqWdHuCVJf7yAc

@dr.danielkester9313 5 жыл бұрын

What is the advantage of creating threads manually rather than just using the thread feature in Solidworks?

@solidworxedu1035 2 жыл бұрын

Hello and happy to see your comment. It brings so much value to our Channel. The advantage of doing it manually is to: 1. Understand the philosophy behind threads. (How they are created). 2. If you are a manufacturer and you want to be precisely in threads, you can do it that way. 3. You learn how to do your own unique threads So the customer can buy bolts and nuts only by you. (This is what automotive manufacturers usually do). Now if you feel that you waste your time by doing it that way, there is an alternative. You can use the following link: kzfaq.info/get/bejne/hbyDeZaa2LmrhY0.html Please let us know if it helps. We trying our best to provide value to people who need it.

@hassankhedr5188 4 жыл бұрын

I want to know how to draw trapizodal thread please and sheet design of it thank you

@solidworxedu1035 2 жыл бұрын

Please send an email with pictures and attachments of what you need us to do. Provide as much info as you can and send it to the following email.: solidworx.edu@gmail.com

@GeorgeWeedBush 3 жыл бұрын

Is it possible there is some already made models where u just put in your Mx, length, width and some magic do it for you? Or I am returning my 3d printer!! i knew I shouldnt be able to made these models

@solidworxedu1035 2 жыл бұрын

Hello and Happy to see your comment on our Channel. I understand what you need. You want to know how to do a parametric design where you can set a specific length, width and height and based on them you can impact all the other dimensions within your design. I have made a series of tutorial of how to create a vice body like this. Maybe you can get an understanding by using the following link: kzfaq.info/get/bejne/p9OIZ91iyLeqhnU.html

@iggnasio 5 жыл бұрын

choose under Hole wizard a thread and it's done

@solidworxedu1035 2 жыл бұрын

kzfaq.info/get/bejne/hbyDeZaa2LmrhY0.html

@pyronaught 7 жыл бұрын

Nice tutorial, but what's with that pounding sound? Sounds like you are beating on your desk or something, shakes the whole room when listening to this.

@pyronaught 7 жыл бұрын

I think it happens whenever you type something on the keyboard. Your mic is picking up the vibrations and when played back with a subwoofer sitting on the floor it sounds like someone is pounding the wall.

@user-cw3nb8rc9e 5 жыл бұрын

Aren't there such cap project publicly available? Should be some repository with coca cola like threads ?

@solidworxedu1035 2 жыл бұрын

What do you mean?

@PePeAung 4 жыл бұрын

Please may i know your gmail ? I wanna know about these threading tools and inserts?

@tofolAA 5 жыл бұрын

Great video! Me ha encantado el tutorial. Aquí les dejo un dibujo que he hecho yo mismo para aclarar un poco todo. I'm going to give you a little drawing that I made in order to help. Thank you for this video. It's great. drive.google.com/open?id=1eeYdYgMfgXTPI3ZrlGyykALHx6MuhVwA

@solidworxedu1035 2 жыл бұрын

Thank you for your comment. It brings so much Value to our Channel. Thanks for the drawing, it looks so professional. Keep the hard work!

@tofolAA 2 жыл бұрын

@@solidworxedu1035 Thank you very much.

@dvorhon 7 жыл бұрын

superb tutorial, but you are beating the keyboard way too much.

@jacksprat2200 4 жыл бұрын

Wasting time just for calculation

@solidworxedu1035 2 жыл бұрын

Hello and happy to see your comment. It brings so much value to our Channel. The following tutorial has been created especially for you: kzfaq.info/get/bejne/hbyDeZaa2LmrhY0.html Please let us know if it help. We trying our best to provide value to people who need it.