Well done man! Well done. Don't see too many videos out there like this for people to learn from. You gone done a good thing bud 😎

That 350 is nothing but solid. Own one and just maintain it annually and keep tender on it. Never fails me , don’t abuse it but use it. Son likes it better than his 420 do to the size and handling. Do recommend using startron in the fuel tank year round better than stabil. I do recommend looking at the battery box for mice sign, had to patch some wiring that was chewed from mice on a quad we purchased with about 700 miles on it. Sometimes just sitting can be a issue with the gas now days and it can turn into a mouse hotel.

I have a 2003 Honda Rancher. It's lived it's entire life in the swamp on the MS river. Front brakes are long gone. However, rear brakes have always worked. Finally started to get a little moisture in the drum this year. I pulled the cover off and couldn't believe my eyes. Everything looked almost like new. Didn't even have to change the pads. I pulled out the cam and cleaned it up and put a new seal in there with a new felt washer and put it all back together. I went ahead and installed new cables for the foot and hand brake. I'm the original owner so I know these brakes have never been worked on. I've always checked for water in there frequently and planned to fix it as soon as it started. Took 16 years to happen. Shows that rear brakes can last a while.

Great information, thanks for taking the time to chat about all that.

I have a 2004 honda foreman that I bought new w/ 1028 miles on it. (My snow plow) All original. Because of your videos, I bought a 2" lift and 26" swaplites. Wow what a difference. Thank you.

I live in the country, and for some reason a lot of 4 wheelers are stolen and brought to the hunting ranches around here. So I would never buy a used 4 wheeler without a title. Great video by the way

Love your vids bro! Some a the best used ATV knowledge being laid down on KZfaq

thanks I am looking at used so I really enjoyed this. Thanks

Great stuff, that's a good amount for someone's inspection checklist. That model with the foot shift is the one to look for, the electric shift adds a layer of electrical components that can be troublesome when you add mud and water. Just a heads up on that Badger, that model uses the same seat foam and seat cover as the Warrior so getting that part of the project finished should be a lot easier since there are plenty of Warrior parts out there.

Thank you for calling out the inflation on the Honda 300s. It's getting pretty ignorant.

Good info. I just bought a 2006 rancher. I was worried about the smoke til I watched this video. Thanks

Useful info for the next time I get a used bike. I spy the hat rack back there. LOL

You'd should've touched up on what to look for motor wise abnormal ticking, one way bearing spinning, and checking for excessive shifter play, i honestly hate when people acid wash cause it ends up making it mud stain worse for some reason and it makes the diffs look terrible after time overall a pretty informative video for anyone that's not wanting to do hours of online research and lastly the thing about the 300s is just how much people invest in there on mine I've changed the swingarm bearings axle bearing front wheel bearings and ball joints, tie rods, clutches gear reduction and new oem style battery that isn't cheap + tons more making where even if I sold it for $2500 I would be taking a loss but I plan to never sell mine i figured id bring that side of the argument up for people in the same position as me

Thanks for that, a couple there I didn't think of..appreciate it man!

Man I just kinda used my own judgement to buy 2 4 wheelers and I used alot of these techniques and hadnt even seen this video

Nice Rancher I have a 2000 Honda Foreman 450 that is the same color it has some problems it smokes a lil bit but we are about to clean the carburetor and maybe that will fix something

6:48 i own two of these identical to this one i have replaced both bearing with quality bearings and still and movement in the wheel plus ball joints tie rods it is hard to get the play out of the front wheels. The design is very very odd theres alot of moving parts up front plus the front breaks never usually work on these so if the breaks are working when they sell it is a very good sign too

I wonder with the back rack side being angled down of you could take a 2x4 and a high lift jack and straighten back up? Thats just off the cuff idea that popped in my head.

I always check how heavy the seat is to see if it has been in water

Thanks for the great video great job. I'm looking at buying a 2006 Honda rancher 400 4x4. What is a good price and what should I be on the lookout for? The guy buys and resales, he says that it's been setting for a while but it runs good and nothing is wrong with it. Please advise asap. It has 1109 mills is this good, bad or normal?

Wow so cool wish i can get a project atv of my own

Thanks for the video!! What do you think about a Sportsman 800 EFI 2005??, it looks ok, has 200 hours, Is that a lot of hours? Could be my first quad..so i dont know a lot. Currently have a drz 400 2001

Is a used 2015 Honda Rubicon 500 automatic for $4,000 a good price?

Hi man, your video is helping me out a lot, as I am looking into buying a used Honda Rancher 350. I'd appreciate greatly your opinion on this: I'm considering buying a 2002 Honda Rancher 350 ES 4x4. It seems in pretty good shape, however there are three issues: - Electric shifting is not working - Electric startup is not working - Display is not working It fires right up with the recoil starter. Engine sounds good, revs good. Almost no smoke coming out from tailpipe. However, as the seller is not the original owner (he's a reseller of used ATVs), he doesn't know any possible reason those things aren't working, or since when they aren't working. My main concern is making sure if those issues are normal problems which randomly arise on a fourwheeler this "old", or if rather they are consequence of very poor maintenance and negligence, even of water logging causing those and possibly other electrical issues. Price for it is actually low, so I wouldn't mind buying it and fixing it if they are simple normal issues which the previous owner just postponed fixing. I just don't wanna buy problems and discover that quad is actually in worse shape than what it actually looks like. Thanks for any advice!

i got a dirty old suzuki looks like it sat for 10 years. it has surface rust on like everything. dude said it will run with a battery.. sure enough i put gas in it and a battery, it started up runs fantastic lol only real issue it has is the foot brake is completely siezed up.

I have a 2007 honda rancher trx400fa. I bought it for my kid. I kinda regret it but... I noticed the coolant reservoir is missing, I don't see where I can refill coolant or at least check levels. Any suggestions?

I’m looking at my first quad for plowing and light trails with family. Found an 04 rancher ES 4x4 with 135 hours and 550 miles. No scratches, dents dings and it’s at a shop that gave it a once over and a tune up. They are asking 4k. By me in CT I can get newer quads with bigger engines but mileage and hours in the thousands for the same price. Do you think 4k is a fair price? I know I could get something new for 7-9k but that’s not in my budget. Looking to keep whatever I buy for years of service.

Im gona give ya a sub because I want to see what comes out of this Rancher. You seem like a person who knows how to take care of their shit.. I have seen a lot of atv trash amd bash vids and the poster crying that their new atv is a POS afteelr bogging it and essentially flooding the engine.

I was looking for your follow up video. I can't seem to find it. Please send the link. Thanks

Does the engine oil cap have a dipstik

Good knowledge thank you

I just got a FourTrax 300 almost mint except the rear part of the seat... everything is new motor trans transfer case...kick start and an electric start...paid 900...was that a deal or no deal...I thought it was a good price but it's also a 99 all original plastics and their nice and shiny...gas tank looks new...

Where do you recommend getting your wheel bearings and other parts from? Nice videos! Thank you

Great video as always! I just bought an 07 sportsman 500 efi I was wondering if these things would idle under water stock or if the exhaust mod will help. Also what snorkel kit would you recommend?

How much should I give for a sym trackrunner 200 2008 model?

its nuts how the prices on these things are now. im still holding out for one at the right price.

I can't find the 2nd video in the series. can you send a link?

Nice Honda Rancher, you might like to check out a 2003 Foreman I have on my channel with only 1090 miles on it and it is super clean. It's not for sale but i thought you might like it

On a Honda rancher ES that has the computer cluster Where does it store mileage and hours Is it just in cluster or is it in computer

I have a 99 polaris and the pull start is like new

Very helpful!

Great video - what did you pay for the rancher in video .. and the new carb cost ? Thank you

So what is a fair price?

you can switch rear drums to disc brake?

Thank you!

How much did you pay for it??

Great vid! whats up with the camera... I feel like I'm on a boat lol!

i bought a beat 450 foreman and restored it back to show room right down to the foreman decals and everything ( which are 48 bucks a side might i add) i went with the disc brake kit, all new shocks, top end kit but i just went once over to keep it as close to stock as i could, but it "WAS" burning a liter of oil in a 5 hour ride, it's got a brand new rear axle and ring gear with one ride on it, rebuilt the diffs, swing arm bearings, tires ,wheels grips , hand guards you name it i have done it, and just when i got her all cherry i bought a brand new grizzly lol, i haven't used my honda in a while but i can't bring myself to part with it, everyone is always saying , sell it why have 2 you can't drive both, but it doesn't owe me anything and it's just like brand new. so i'll keep it.

what are the size of frount and back tire size of thoes swampers on it

i would buy a factory carb for 250 before i spent 50 on cheapo china knockoff one thats just me though.. it prob be more like 500 for OEM i would think but i could be wrong

Did you have to buy a plate to mount the winch

Is it japanese? Is it cheap? Does it run or show promise? Buy it

I found a 2001 rubicon with 268 miles. Looks mint. Said it was just for hunting. They want $4500 obo. What do you think?

Watching this in 2024, used Hondas have definately come up in price since 2020

You know there is an old school mopar head on youtube called uncle tonys garage and his "what to look for on used vehicles" parallels what you say. What I mean is the details in an "honest" used cars ie normal signs of wear.. If you see parts on the underside looking freshly painted or undercoated then someone is hiding something. Your mention of acid washing signs would be a red flag the seller is trying to disguise something ie "painting a turd gold". I like how you point out clues of mudbogged atvs and signs. If you see signs of the atv being submerged you have to assume the engine has been underwater. I dont care if people say "its a honda its bulletproof" take of seat and panels and forget that the seller added new tires and reconditioned the seat.. The nooks and cranny will tell you the story.. The places a seller usually doesnt bother with cuz they wana make it bling. Its the same as a shitty powertrain classic vehicle getting a pay and spray paintjob, some autozone chrome valve cover n air cleaner and maybe some cheap reupolstery and selling a piece of shit for $20k. Ie again painting a turd gold..

LoL, the grips... Yeah my 94' and 93' trx 300 grips are originals and look like racing slicks heh.

good stuff 2 know

Here in eastern Canada, an old 300 is anywhere from $1800 to $2500... BS... And yes, it's because people think there worth a Fortune!!!

I would I LOVE QUADS FOR OFFROADING

Buying nothing that's been snorkled or with snorkle holes

Thanks

How much did you pay for that Rancher?

Very informative. Sounded great until you got to the brakes. Needing to change the brakes over to hydraulic disc is a big job and a major expense, not to mention a serious safety issue. For my money, I think I’d look for another machine.

Wow

“Motor smokes”. Ranchers smoke???? Never a good sign if a motor smokes. Means it’s burning oil. Water can easily get onto these engines if the pull start handle is loose. That’s why the pull start rope is mud/dirt stained.

Bud light the perfect beer aside from Budweiser

How much you pay for it

You have a contact email I have some question about a bike I just bought

Can you buy me a quad please 😫😫😫

Mud worst enemy for ATV. That is manual Honda. I like better than electric shift.

Half an hour on seats, then "if that thing's missing, it's been snorkelled" WTF?

Bruh

I bought a 04 that was beautiful. Runs like new. After owning it for about a month I noticed the Frame was shot. Rusted through. This thing was about to break in half . It's my own fault because I didn't look.