I received this scanner in a mail yesterday, and today reset my steering angle and calibrated other things that caused my VSA indicator to constantly be on the dash. The reset worked great and now have the VSA working again.

You should learn the device before reviewing it.

It is a shame you don't know how to work the tool before doing a review, and it's your second review! Also your car is Asian not European. The reason only hybrids show is because they need thier batteries reset...hybrids! Yours, you just stick a new battery on when it's dead and off you go again. Does anyone do a good review of scan tools? Even the dealers don't know what they do! Would be good if someone did a review and actually showed some of the more advanced stuff the tool does instead of just unplugging an airbag?

the menu looks frustrating. if it reads the OBDII, why do you have to tell it manually the car you have?

Adaptations are values that the car has learned over time. Weather its learning your driving characteristics all the way to adjusting different parameters slightly as the car ages and parts wear down in an attempt to give the driver as little performance degradation as possible. An example of that would be replacing your battery with a new one in a car equipped with a battery monitoring system. If the new battery is installed without resetting the ecu the car is going to keep charging the battery as if it were old because an older battery needs more of a charge as it ages, and the lifespan of the new one will be seriously diminished. That the theory of it anyways in a nutshell. So that's an adaptation, hope that helps.

Yup. This was pointless. I own this and it works well. A better review would have been using it to read an engine management code or show the live data selections with graphs. Also, not every function is designed to work with every car. A scanner can only communicate with a car that’s built to respond with specific functions.

I try to put my Volvo V70 in service mode, to change brakes. But my nt650 elite tells me that the battery is to low. The minimum for service mode is 12V. I have a battericharger connected. So I have 16,8 V. And still it tells me it's to low battery. What should I do?

I have the nt650 and can't find a tpms option anywhere am I missing something? Do I need to do an update?

is it more for maintenance rather than diagnostics,,what autel do you reckonmend,cheers

Autel or ancel the ancel fx6000 has full scan and at least 10 maintenance functions 15 with update

I tried to download the since I purchased this item and I get a message of this can not be reached. A black screen.

Amigo vc sabe como estalar o software do nt644 nele?

Can this tool do cam regard setting on my 97 chevy 350

I have one just like that it does do the brake bleeding read what you buy! People want to sale don’t be duped 😂

I’m I crazy or is Hyundai not a Korean brand? So why do you spend all video scrolling to European vehicles and then saying nothing there? Or is S. Korea in EUROPE in Foxwell’s mind? So confused on if you’re wrong or Foxwell’s wrong or I just don’t understand?

If your going to DEMO a piece of equipment at least know where all you props come from, HYUNDAI is made in ASIA! and has been forever.

Can it do a abs programming 🤔?

Try updating it

This Foxwell stuff is a joke. I had the N650 Elite, and it was very unreliable, + guess what, it can do almost nothing with my W204 Merc, which is a popular car so nothing fancy stuff. It cannot access the Airbag module, cannot see the engine control module (only thing it can see the very basic OBDll stuff, which can do a 10$ chinese OBD reader just as good), cannot do the throttle body adaptation (on paper it should be able to do that so they simply lie). In comparison, my other tool the iCarsoft CR Pro was able to do the adaptation without problem, and it can access all of the modules in my car. The update of the Foxwel is a PITA, the application freezes every 5 minutes, sometimes cannot connect to their server to download the stuff. Never ever buy anything from them. The only thing which the Foxwell do better than the CR Pro, it can show 2 graphs in the same time, while th CR Pro can only 1.

Me i asking if it is all brand of cars compatability

"Autel does tpms" thats what tpms reset and adaptation is. Battery section.......... why are they only hybrids? Hybrid runs on gasoline sometimes and what else? battery.

Have you done the software update ? Does that make a difference

i hav obdii 650 elti very bad not good good only voor nissan and opel

Hyundai is Korean. Asia

I see what you are trying to do LoL 😂 get autel to send you one for a review Hyundai = Asian car LoL 😂. Just wanted to be honest you should just delete this video cause autel won't send you a scanner if you going to do a review like this.

I ve got 1 its crap

I see what you mean, you are not at fault here yet these other people comments are blasting you for being at fault. I will explain why. It was confusing for me too, I thought the same way as the others in blaming you but something said figure out the truth. You select Asian car, did a SmartVin and after 2 mins of scanning which you clipped out you showed us that the scanner gave ( 3 : 2 8 ) USA & Europe, VIN and only gave you a Airbag module, so for the sake of the video you select USA, Sonata... What else could you do. The thing is, the reason why Foxwell gave you USA & Europe is because your car is built in Montgomery, Alabama, USA!!!!!!!!! Yes, it was frustrating, no choice but to chose Asian brand 1st but when you did the SmartVin Foxwell knew it was made in USA... Foxwell can't be blamed for the truth and not all features works across the brands or models. I need to figure out why it gave you Airbag module only but I need a rest after this. Why you did not do a diagnosis scan of the car in the beginning to find the TPMS fault?

Attention seaker😭😭😭

Yuo are only cheating your viewer, because i use it already by the bi directional test on my abs

Your wrong it does bleed your brakes. You shouldn't review a product if you don't have a clue how to use it.

I have watched many videos of people using this scanner , why you are reviewing this and being offered scanners to review baffles me , you don't know what you are doing , this does have ABS bleeding and you should not be reviewing products , this video is shocking

It`s a clumsy piece of junk. Sorry I bought it.

You don’t know what you are talking about