Sonoma S10 98 up dash removal heater core etc

Рет қаралды 14,922

Fuel Slut

2 жыл бұрын

Пікірлер: 24

@sowdersd1 Жыл бұрын

So much movement by camera very hard to follow..... wow

@adamgoof Жыл бұрын

Hey man, I ripped one at a junkyard same year, 98 s-10 why do people not want to do it because he say about the airbags and the truth is hard take a risk for the airbag

@MA-lm1ql 4 ай бұрын

Why would you want to remove the hvac box? Then theres no heater or ac in the truck? Doesnt make sense to me.

@fuelslut 4 ай бұрын

Confused doing a heater core is what the video is about

@red_reapergaming3710 2 жыл бұрын

The big cable the one you pulled out with the are bag is it just un screw the 7mm and pull or where do you release it from?

@fuelslut 2 жыл бұрын

the steering column setup yes 7 mm

@red_reapergaming3710 2 жыл бұрын

@@fuelslut because I unscrewed but it won't come all the way off it just rotates. Is there a trick to it?

@fuelslut 2 жыл бұрын

@@red_reapergaming3710 Pull on the connector it has locking tabs

@red_reapergaming3710 2 жыл бұрын

@@fuelslut ok just got it off

@garrettdavidson3452 2 жыл бұрын

i got 98 s10 heater core leaking 😵😵😵😵great lol what fun

@fuelslut 2 жыл бұрын

Ya no fun

@greysonstewart1577 Жыл бұрын

“Take a bunch of 7 mm bolts out” my brother in Christ, WHERE? Point them out.

@fuelslut Жыл бұрын

GM and 7mm bolts on trim and using them for all the electrical connections

@isaac854 2 жыл бұрын

Gotta get the heater core and evaporator replaced, about to cost me ≈ $1,500 ☠️

@fuelslut 2 жыл бұрын

Yeah i just did one on an s10 blazer, not fun

@scotthill5179 Жыл бұрын

What would cause my 95 to die in seconds after doing my heater core?

@fuelslut Жыл бұрын

hard to say, since i cant see what you did. did all the vacuum lines get reattached. wiring etc

@jeremyb2907 Жыл бұрын

If it was vacuum you'd be able to rev it up. Less intake vacuum when reving. Did that year come with vats or passlock . That would cause a start an stall.

@jerryhuff86 Жыл бұрын

Oh! My Head.

@roberthowe321 Жыл бұрын

It was good that you were trying to show the parts, however you should have stopped for a few seconds on each item you were trying to show, and also zoom out to show the whole item. The video was too jumpy and difficult to follow. I still got some useful info, Thanks

@fuelslut Жыл бұрын

Roger which parts are you trying to see?

@roberthowe321 Жыл бұрын

I was trying to understand each step of the process before I got started. @@fuelslut

@fuelslut Жыл бұрын

@@roberthowe321 major thing is the dash is hinged to be removed, but you have to remove steering column and prep the dash for removal, then the dash sticks to the insulation on the fire wall. it is not fun unlike a 4th gen camaro where you just do it thru the glove box