Speed Queen Washer Not Spinning | Belt Installation. (AWN412SP111TW01)

No video

Speed Queen Washer Not Spinning | Belt Installation. (AWN412SP111TW01)

Рет қаралды 24,155

Күн бұрын

If you are experiencing your clothing are still wet after the cycle is completed . You probably have a worn out or broken belt.
Buy the belt here (affiliate link)
amzn.to/3jpho3u
Thanks for watching! Email me if you have any questions at appliancerepairshorts@gmail.com
If this video helped you, you can support me by buying me a coffee. Thanks!
Ko-fi.com/appliancerepairshorts

Пікірлер: 52

@kinggoose6894 Жыл бұрын

Thank you so much. Clips were a pain. Took me a whole 10 minutes

@donstrong7775 Жыл бұрын

Nice training video, I have to replace mine tomorow, washer not ringing out clothes at spin, due to belt streched or weak spring. Replacing both.

@jesusurosa8190 Жыл бұрын

Thank you for your practican lesiona. VERY USEFULL AND INSTRUCTIVE!

@Thena_the_Grey Жыл бұрын

My belt gets in tomorrow and glad I found your video! Quick, easy and while I know I could have figured it out, you took all the guess work out of it. Thanks!

@appliancerepairshorts Жыл бұрын

Glad it helped. Thanks for watching!

@Thena_the_Grey Жыл бұрын

@@appliancerepairshorts thanks for posting! Literally took me less than 5 minutes to install the new belt and start tackling my laundry pile lol

@marcelausategui7006 3 ай бұрын

If you release the tention spring, it is easier..!!!!

@beckyphillips6576 8 ай бұрын

So our washer wouldn't spin or drain so we replaced the belt and they pulley (that was broken). Now it sounds like it is seizing when time to spin. The belt is moving very slowly, sometimes slipping and the motor is starting to smoke as its trying to spin. Any ideas as to what I do next?

@appliancerepairshorts 8 ай бұрын

Check your email I responded. Thanks

@postskeetclarity 7 ай бұрын

same here what's the fix

@latoyanewman75 6 ай бұрын

I having the same problem did you find out what was wrong

@nathankobuck616 4 ай бұрын

If the clips are missing does it have screws holding it up? No clips and it won't come free

@appliancerepairshorts 4 ай бұрын

Probably not, but you would have to order special screws. You would have to have the screw holes in the pump feet. Or just order the clips. Good luck

@user-jt5mn9wp3k 5 ай бұрын

Show us how you got the left pump support back on! Impossible!

@appliancerepairshorts 5 ай бұрын

You push down on the center as you pull up on the bottom. The same way as the front clip

@education9135 3 ай бұрын

What are all symptoms that could cause the speed queen washer not to spin only and agitate only and both agitate and spin.

@appliancerepairshorts 3 ай бұрын

To make sure I understand what you’re saying. The washer doesn’t spin in any cycle? So I would check the belt, the idler pulley. Remove the front cover and remove the drain pump. See now if it spins. Do you hear a humming? A bad capacitor. You can also check for power going to the motor. Send a model number. How is your lid switch?

@education9135 3 ай бұрын

I will let you know

@jennypark3823 Жыл бұрын

So this could be a reason why my speed queen sometimes doesn’t spin during wash cycles?

@appliancerepairshorts Жыл бұрын

Yes remove the front cover and check your belt. If you want to send me your model number I’ll find your belt part number

@gustavooller1733 4 ай бұрын

Hi friend. My washing machine completely rotates the entire internal tank during washing and does not perform the washing operation correctly. what could be happening?

@appliancerepairshorts 4 ай бұрын

Hi, how are you? So how old is your speed Queen? Get me a model number. Can it spin?

@tyhigginbotham6874 Жыл бұрын

Thanks for the video! Got a question for you, what if the motor doesn’t spin at all when we switch it on, the belt is relatively okay/still on track BUT when I hit spin all it doesn’t is drain water, thanks!

@appliancerepairshorts 9 ай бұрын

Sorry I didn’t see your comment. You can also email me. Your question wasn’t too clear. If it is not spinning, check the lip switch, but also check for obstruction in the pump or the belt could be worn out also you have a capacitor, if you put it on spin and are able to partially spin by hand. If it spins, replace the capacitor. Hopefully you already got it

@robertobispo4971 5 ай бұрын

8:52 8:54 @@appliancerepairshorts

@robertobispo4971 5 ай бұрын

Olá boa tarde eu tenho uma speedqueen lavadora ela só lava mais na primeira lavagem ela não centrifuga entra a centrifugação e para e começa a entra água ae ela não enxaguar?

@jesusurosa8190 Жыл бұрын

Sorry, the automatic dictionary in spanish changed my words....

@appliancerepairshorts Жыл бұрын

Thanks for watching!

@simons_pics Жыл бұрын

Hi our 220V motor started to smoke and so we removed the motor and found black residue on the copper windings also the belt was worn to shreds my question what could have caused this problem ?

@appliancerepairshorts Жыл бұрын

Hi Simon, the black residue is from the belt. From the friction and heat of the motor, the belt melted but i wouldn't worry about the residue. Just clean it off. It sounds like it may be overloaded or a bad/worn pulley. Replace the pulley if it's not turning perfectly smooth. The belts usually last about 6-7 years.

@lilianadelacerda4223 5 ай бұрын

Help. I installed the belt and before this installation it never leaked. Now after the installation it leaks from the top. Rim. Also now only blinks and beeps 3x

@appliancerepairshorts 5 ай бұрын

I would need a model number. The leaking is probably from the drip rail edge. You might have soap scum blocking the drainage and it is spilling over. I’ll tag you in a speed Queen maintenance video.

@hnkparts Жыл бұрын

Impressive troubleshooting skills! We'd love to help you fix the issue with our advanced washer models. Reach out to us for a seamless spinning experience!,

@user-jt5mn9wp3k 5 ай бұрын

Oh no, putting that left back clip on is impossible! Help!

@appliancerepairshorts 5 ай бұрын

I have a speed Queen, I’ll do a video on that later tonight

@user-jt5mn9wp3k 5 ай бұрын

Thanks

@user-jt5mn9wp3k 5 ай бұрын

With the pump still on , a man’s large hands will not fit behind the capacitor and behind that belt! My hubby had me in there trying to help. My hands fit all the way in but once I found where the dang top should hang I could not push down hard enough to set the clamp! After a long long time trying hubby finally took the motor out. Whew! Running like a speed Queen!

@gilliandoffay4224 10 ай бұрын

can the brake stop the spinning . my machine spin the motor works but the maim shaft dont turn. i havent used machine for a whilev cac the brake be the problem. thank you

@appliancerepairshorts 10 ай бұрын

How old is your washer? You might have a brake that isn’t releasing. Try tapping it with a rubber mallet. Or you might have something caught in the pump or clothing in between the inner and outer basket

@BRWfilms 7 ай бұрын

How does the rod that puts tension on the belt assembly work My speed queen is spinning sometimes and some times not like the rod isnt moving to put tension on it some of the time what do i need to look into to fix that? Belt is fairly new. Spring on tensioner is kind of new although it only pulls it back its not for putting tension

@appliancerepairshorts 7 ай бұрын

I think you might have the belt on the wrong way. Or it it too big. When you say the belt is new, why are you changing it. What was the original problem?

@BRWfilms 7 ай бұрын

@@appliancerepairshorts so the washer has been working with the same belt for over a year now. It was a while back when I replaced it. Has been used on daily basis It appears to be on the tensioner and pullys. I felt it with my hand and looked at it I can put the washer on a spin cycle. Sometimes it goes into spin but most of the time only pumps. No spin. **BUT IF I MANUALLY MOVE THE TENSIONER WITH MY HAND IT SUDDENLY STARTS SPINNING** at that point it will spin until cycle is over. I've looked a bit online but haven't found anyone experiencing this so far. If you think it would help I could upload a video of the inside of washer while it's operating so you can see what I mean

@BRWfilms 7 ай бұрын

@@appliancerepairshorts I'm not changing it. What I meant was it was changed in the past the other one was freyd real bad so my point is that it's not a worn out belt causing it to slip. Spring was also replaced a year or so ago but washer has been used probably 100 times since then

@appliancerepairshorts 7 ай бұрын

@@BRWfilms got you, yes upload a video and email it to me. How is the spring tension

@BRWfilms 7 ай бұрын

@@appliancerepairshorts I think the spring tension is good but I haven't taken it apart and physically checked the spring but I did look at it. I'm out of town till 25th. I will definitely upload a vid and email it to you when I am back. I appreciate you taking the time to get back to me!