Must Watch BEFORE buying a custom Steering Wheel

Must Watch BEFORE buying a custom Steering Wheel | Q50 G37 370z

Рет қаралды 13,304

4 жыл бұрын

After putting a few hundred miles on this custom steering wheel from @jaliscos_carbonfiber, Ive come up with a few thoughts I’d like to share before you make a purchase yourself!
Some of my other favorite parts: www.amazon.com/shop/speedcult...

Пікірлер: 84

@drzchulo1010 4 жыл бұрын

Have this same wheel. Love it. Airbag part was tough to put back but managed. 👍🏻 alignment was needed since I didn’t put back lined up as it was.

@SpeedCultureStudios 4 жыл бұрын

Good deal!

@SpeedCultureStudios 4 жыл бұрын

Good deal!

@samh2335 4 жыл бұрын

Sweet vid I just bought one of his wheels the other day and love it!

@SpeedCultureStudios 4 жыл бұрын

Awesome man! Really like mine too! One of my favorite purchases.

@ItsR1C3 4 жыл бұрын

Thanks again for that discount!

@SpeedCultureStudios 4 жыл бұрын

Glad to share the info!!

@jamesherrmann4854 4 жыл бұрын

HAHAHA!! My mom! Thanks for this video and all the videos for that matter!

@SpeedCultureStudios 4 жыл бұрын

Lol, it’s true tho! Are we car people or are we a bunch whiners that need heated steering wheels for our little dainty hands!?! 😂. And thanks man!

@tristanoliver2911 4 жыл бұрын

Same; the zoom in killed me😂

@isaiasmeza620 4 жыл бұрын

Ordered mine in January , hopefully it gets to me soon

@SpeedCultureStudios 4 жыл бұрын

Awesome! You’ll love it!

@adeayo1994 4 жыл бұрын

Nice videos always! Keep it up. I have a question, how do you set the upper screen(GPS screen) to display the analog time clock. I can’t get to do that on my 2014 Q50 I’m stuck with the boring map look. thanks

@SpeedCultureStudios 4 жыл бұрын

I get asked that all the time. I actually don’t know if it’s possible. I don’t have Nav so the clock is always just there.

@adeayo1994 4 жыл бұрын

Speed Culture Studios oh that makes sense, I have GPS. System and that’s all that sits there too plus a fee settings and different screen displays. But no analog clock .. thanks a lot

@wcd217 4 жыл бұрын

q50 turn signal installation switches???

@Hondacbr600rrish 3 жыл бұрын

Nice video! Had a question about your sparco seat. How did you get the air bag light to go off and activate the air bag again. Thank you.

@SpeedCultureStudios 3 жыл бұрын

Check out my sparco seat installation video. Just requires a small resistor.

@Hondacbr600rrish 3 жыл бұрын

Thank you.

@162mikey 2 жыл бұрын

Hey I got a chassis error after installing one of Jaliscos carbon wheels. The backup camera lines are doing zig zags. You got any idea what it might be?

@SpeedCultureStudios 2 жыл бұрын

I have no idea unless you crossed a wire in reassembly

@ballerbiker5 4 жыл бұрын

Hey man I'm trying to install a nitrous system on my 2015 infiniti q50 base like yours. I live near Asheville nc and I wondered if you knew anyone around that does installs and tuning for nitrous. Thanks.

@SpeedCultureStudios 4 жыл бұрын

I don’t know anyone that has done it. I’d check with soho motorsports for guidance.

@Saltymoles 3 жыл бұрын

Damn tryin to follow this build! Whats your ig?

@Tommy-fq6gw 4 жыл бұрын

Hey, I used your discount to buy a wheel and followed your instructions for installing, but I came upon an issue. The audio buttons and horn are not working on my wheel and I am wondering why? Hopefully you can reply, big fan thanks!

@SpeedCultureStudios 4 жыл бұрын

Hey Tommy. Changing the wheel should not affect the audio or the horn. You just have to be sure the connections are tight and that the airbag gets seated correctly so contact can be made with the horn. You may have to pull it off again to make sure there is nothing in the way.

@keat5582 3 жыл бұрын

I replaced my clock spring a while ago and had the same problem. No horn, airbag, or buttons working. What did you end up doing?

@thegoat4232 4 жыл бұрын

I used to live in Minnesota. No winters like that state

@SpeedCultureStudios 4 жыл бұрын

That’s for sure! What part of the state?

@thegoat4232 4 жыл бұрын

Speed Culture Studios Rochester, home of Mayo Clinic

@SpeedCultureStudios 4 жыл бұрын

Sweet. I lived right behind mayo for about a year in Rochester.

@T.B.Nation 4 жыл бұрын

Hey brother, question. I bought a steering wheel from J and installed it but now my traction light and airbag stay on

@SpeedCultureStudios 4 жыл бұрын

You need to take the airbag part back off to make sure things are plugged in correctly. The steering wheel is exactly the same as stock so it wouldn’t effect any electronics

@T.B.Nation 4 жыл бұрын

Speed Culture Studios thanks bro. Yea J is legit!

@jjamaya01 3 жыл бұрын

Same thing happened to me.. I actually ended up breaking the clock spring since it got stuck and pulled out with the old steering wheel. Bought a new one for about $200 but when that happened I had to go have my SAS reset Bc VDC & slip light came on all the time randomly braking the car. And I reset the airbag light myself with a method I found online

@T.B.Nation 3 жыл бұрын

@@jjamaya01 thanks a lot!

@jjamaya01 3 жыл бұрын

@@T.B.Nation yea ofc! I bought another steering wheel from him for my other car and was so scared when switching them but all went well 😂

@INFINITIBROTHERS 4 жыл бұрын

Awesome video!I want to put those seats in my G37. Did you have to custom your brackets or do they sell them for your car? I seem to can't find any for my G37 sedan 😩

@SpeedCultureStudios 4 жыл бұрын

I live the Sparco seat! Check out my install video. It’s super easy. Bracket is car specific. You should be able to find one through the same company-Planted. They make custom brackets to order.

@INFINITIBROTHERS 4 жыл бұрын

@@SpeedCultureStudios Mah Man 🤙🙏

@joethedesigner2483 4 жыл бұрын

This might not be relevant to this video but I would like to know your opinion on the sway bars lowering springs and strut bar... how much do these items improve handling and responsiveness ? 1 out of 10, ten being the best. I want my car to feel flat on the highway and not like a boat floating and rolling while changing a lanes at high speeds .flat in corners too .. btw I have a q50 aswell on 18 inch wheels wrapped in Michelin pss every thing else is stock.. idk if you have a video explaining your opinions on your upgrades so I decided to just ask ya. Thanks again for keeping the content flowing in these weird times aswell!

@SpeedCultureStudios 4 жыл бұрын

I have full review vids of each item and their install. Sway bar and springs have had the biggest impact in my opinion. Highly recommend them.

@joethedesigner2483 4 жыл бұрын

@@SpeedCultureStudios yep I watched them as well as all of your other videos. Thank you so much your videos are very informative and professional imo. Thanks once again I will definitely be doing this upgrades as I dont want the car to be much faster or louder but just be great handling machine... o and when is that big break kit happening I know your going to love it

@SpeedCultureStudios 4 жыл бұрын

JoetheDesigner I want to do a brake upgrade this summer but this virus is messing stuff up and I’m working on a partnership for some wheels that will fit the bbk.

@joethedesigner2483 4 жыл бұрын

@@SpeedCultureStudios I have good faith that it will all work out for you! Looking forward to your future videos no matter what. You and your family stay healthy in the meantime 👍

@SpeedCultureStudios 4 жыл бұрын

JoetheDesigner same to you. Thanks again’

@thewiseguy7100 4 жыл бұрын

So the gloss black is just vinyl wrap?

@SpeedCultureStudios 4 жыл бұрын

Yes

@thewiseguy7100 4 жыл бұрын

Speed Culture Studios Looks good, I plan on vinyl wrap myself .

@SpeedCultureStudios 4 жыл бұрын

TheWiseGuy I’m sorry were you talking about the gloss black on the steering wheel?

@thewiseguy7100 4 жыл бұрын

Speed Culture Studios Yes I am

@SpeedCultureStudios 4 жыл бұрын

TheWiseGuy sorry, I had chrome delete on my mind. No, the wheel is not vinyl wrap. It’s a custom, gloss back wheel.

@jnino956 3 жыл бұрын

Hey, what bracket did you run for the seat ? Anything else to make it work on your vehicle?

@SpeedCultureStudios 3 жыл бұрын

It’s a planted bracket with sparco sliders. All included in the installation video

@jnino956 3 жыл бұрын

I’ll check it out, thanks

@blublaze97 4 жыл бұрын

Hey how u doing can u tell me which air filter you have looking to change my figured I upgrade thanks

@SpeedCultureStudios 4 жыл бұрын

Hey! aFe dry filters. Check afepower.com

@blublaze97 4 жыл бұрын

Thanks👍

@blublaze97 4 жыл бұрын

Just ordered them thanks

@SpeedCultureStudios 4 жыл бұрын

John Gonzalez no problem!

@nate4878 3 жыл бұрын

How do yu not like cf

@SpeedCultureStudios 3 жыл бұрын

It’s just a pattern. Not much to like. I like the idea of it-strong and light, but I’d much rather like to see a solid color. I don’t mind touches of it, but to bolt or tape a bunch of carbon pieces to a vehicle just doesn’t make sense.

@thienquach1026 4 жыл бұрын

After install do I need alligment after?

@SpeedCultureStudios 4 жыл бұрын

No but couldn’t hurt

@Alex-nr2ns 4 жыл бұрын

How much is the steering wheel?

@SpeedCultureStudios 4 жыл бұрын

They are generally in the low $300s but depends on what you want.

@StockBoys 4 жыл бұрын

I’ve been thinking about getting a custom steering wheel. Great video!

@SpeedCultureStudios 4 жыл бұрын

Do it!

@heyanthony123 4 жыл бұрын

Haha "MY MOM" 😳

@MIGGY912 3 жыл бұрын

How are you getting 21 mpg ?😭

@SpeedCultureStudios 3 жыл бұрын

Drive like a normal person lol. And good filters and new plugs

@juanmacias5215 4 жыл бұрын

Ha-lisco.. that’s how you pronounce it. It’s a state in Mexico. Great content btw

@SpeedCultureStudios 4 жыл бұрын

I knew that from recent vids-I said it like that so people know how to spell it. Notice at the end of the vid I say it properly lol. Thanks for checking in!