In episode 3 of the series, Jason Garfoot walks through the proper way to mask and apply primer to your damaged car panel. Discover a back taping technique for a softer edge and the importance of pressure and gun setup to avoid overspray.
Important notes (00:38)
Wear proper PPE: safety glasses, protective gloves, respirator and whatever else you need for the job. This video is intended for a professional setting such as a body shop or paint shop. Make sure to check OEM recommendations to confirm you’re using the correct adhesive for the job.
Sand to Prep for Primer (01:24)
Follow the paint manufacturer’s recommendations on grit.
Clean before Applying Primer (01:58)
Masking (02:39)
Setting up the Performance Spray Gun (04:27)
Apply Primer (05:38)
Products used in this video:
3M™ Performance Spray Gun System with PPS™ 2.0
www.3m.com/3M/en_US/p/d/b5005...
For more advanced tutorials, check out 3M Collision Repair Academy
www.3m.com/3M/en_US/collision...
Safety and warranty information
www.3m.com/3M/en_US/collision...
Website: www.3MCollision.com
Instagram: / 3mcollision
The information contained in the 3M Collision Repair KZfaq videos is intended for industrial/occupational use by persons with the knowledge and technical skills to use such information. For additional information, including important safety and warranty information, regarding 3M Automotive Aftermarket products, visit: www.3Mcollision.com/info. Please follow all local and country regulations regarding use of the products.
Important Note: There are many factors that can affect an individual repair, so the technician and repair facility need to evaluate each specific application and repair process and determine what’s appropriate. 3M recommends reviewing relevant vehicle repair and OEM guidelines prior to starting all repairs.
This video may show products not available in your area.