Spring butcher tool for the anvil hardy hole

Spring butcher tool for the anvil hardy hole - blacksmithing tools

Рет қаралды 105,147

Күн бұрын

Spring tools can be a handy way to secure both top and bottom tool at the anvil for the single person shop. Today I will experiment with an idea for a no weld spring butcher tool that is made from a single piece of 1/2" x 1 1/4" steel.
Thank you for watching. Black Bear Forge is a small one person shop located in Southern Colorado.
If you would like to take a more active role in the production of these videos, you may provide financial support through one of the two links below.
www.paypal.me/BlackBearForge
Or you may set up a monthly contribution through Patreon
/ blackbearforge
Find my shop on line at:
www.blackbearforge.com
www.blackbearforge.etsy.com
/ blackbearforge
/ black-bear-forge-20986...
The following list provides just a few resources to help you find supplies and equipment for blacksmithing.
www.piehtoolco.com/
www.centaurforge.com/
www.blacksmithsdepot.com/
www.blacksmithbolt.com/
www.oldworldanvils.com/
www.nimbaanvils.com/
fontaninianvilandtool.com/
www.abana.org/
www.mcmaster.com
kensironstore.com/
Blacksmithing and related activities can be hazardous. These videos are not a substitute for competent professional instruction. Your safety is your sole responsibility. Always use appropriate safety equipment including eye and ear protection when working in the shop. Follow manufactures safety guidelines for the use of all equipment. In the event something shown in one of these videos seems unsafe, it is up to you to make the appropriate changes to protect yourself.

Пікірлер: 342

@faelwolf1177 4 жыл бұрын

Small basic arc welder $50-$100 used about anywhere. Scrap material to practice on and some welding rods $25. A valuable skill you can use for life, priceless.

@GorVala 3 жыл бұрын

Whole lotta respect, i can't play any instrument.. nicely done much appreciated for sharing.

@seandahl8441 2 жыл бұрын

I really dug the banjo at the end. You should have it as your outtrow

@creedsixteen891 Жыл бұрын

Thanks for the tune. 😄

@irgosum 2 жыл бұрын

I think you are a good man and I really believe the world needs more people like you.. ...big hug from Brazil 💪🔥

@louiedavis3138 2 жыл бұрын

Your banjo playing really lifted my spirit. I was kind of down , it's just too hot in my shop to forge and I have a desire to manufacture some tongs and tooling. I came across you playing with confidence and control. Causing me to stop and really hear the melody. It's a very joyful sound. Thank you John S. You probably heard many times that your a very good man. I pray you never get tired of hearing accolades. But at that risk John S. Your a very good man to me and my sons. I often watched and tried to forge things you have shown. Now my oldest son will sit down as ask Dad are we going to watch Black Beat Forge. It most often a joyful yes.

@finalaccuracy7695 3 ай бұрын

I could listen to you play the banjo all day. I've always loved the sound of the banjo since I was little. ❤

@davidhughes3196 4 жыл бұрын

Banjo’s rule.... your right, banjo & blacksmith’s just go together, keep plucking and hammering.

@rwg727 11 ай бұрын

Thanks as usual John! I always like your videos. Thanks for being so informative with your demonstrations. I thought it was great that you played for us!❤️👍🏼👏🏼

@BlackBearForge 11 ай бұрын

My pleasure!

@65burnie 4 жыл бұрын

Rhythm with a hammer and a bango !!!!!

@ga5743 4 жыл бұрын

We need to hear you and Annie playing a duet......your banjo and her mandolin. 😊

@BlackBearForge 4 жыл бұрын

That would be fun, butI have real trouble staying with someone else

@Mr4nt0ni0 6 жыл бұрын

Liked the banjo section and and can't wait for the giveaway, usually your videos pop out about 4 -6 am in Poland but as soon as I wake up i watch it, so i can't wait until the random hour giveaway video is up. Keep up the good work.

@ppmodelmaker Жыл бұрын

Excellent video always easy to understand and I must say the Banjo sounded great

@Newtricks455 4 жыл бұрын

I enjoy your banjo as much as your blacksmithing. You are my #1 favorite blacksmith btw

@Thumper1944 5 ай бұрын

Loved hearing you play the banjo! Love your talent !! In all you do sir! So talented in so many things! I’m jelly! Keep it up and appreciate all your videos

@sherwoodlayton9595 Жыл бұрын

Banjo was pretty good.

@SivaKumar-bx3fn 5 жыл бұрын

Spring budger making, Music is superb of favourite Artisan in Black smiths. Thank you

@Quenivere8 2 жыл бұрын

You are a great teacher. Enjoyed the video and the hat. Take care👩🏻‍🌾

@billwoehl3051 5 жыл бұрын

Love the banjo music!!!!!

@kennymiller4428 5 жыл бұрын

John, I do like the banjo pickin. Have an idea for attaching the tool steel dies to the mild steel springs. Punch a hole down in the end of the dies so the mild steel will slip in, punch a cross hole thru both and rivet. Just a thought.

@andyhalman996 2 жыл бұрын

John your rocking that banjo awesome

@poindexter1387 2 жыл бұрын

I didn't see that coming.....That was AWESOME John ...🔥🔨

@cdqa68 6 жыл бұрын

Another video to add to the much enjoyed list. Then you did some banjo playing! I heard that learning to play the banjo really good is hard to do, but luckily no one knows what good banjo playing sounds like. Fantastic job on on accounts!

@BlackBearForge 6 жыл бұрын

😂😜

@brianfalls5894 3 жыл бұрын

John, love your inventiveness with the tools and you didn't do a bad job with the banjo either. Keep up the good work sir!

@chriskelly3678 Жыл бұрын

Master Craftsman, Master Video maker. So few would recognize WE can't see the job. I was thankful you moved 90° out of your way to show US The work on the pipe bender. Bravo sir. 👏 and Thank You!

@paulbodypumper1 3 жыл бұрын

Like the Banjo always wanted one perhaps one day

@robertmartin7643 5 жыл бұрын

Hey John, for those who don’t have an arc welder yet I picked up a DC inverter stick welder on Amazon for just under $300. Best part is it’s a 120volt machine (can also run on 240v) that strikes an arc very nicely with 6013 rod. Great tool for the beginner that is very small and weighs less than 15 pounds! FYI..

@dannygill8519 4 жыл бұрын

Awesome video as usual and thanks for sharing them. On another note, maybe you could do your banjo picking for video intro/outro. Yeah that would be pretty cool.

@zxc1972 5 жыл бұрын

Upvoted for the banjo!

@Zogg1281 5 жыл бұрын

I think you sell yourself short, you're pritty good with that banjo! The anvil tools without modern welding would also be a good thing to look into for future videos 👍

@paulorchard7960 5 жыл бұрын

My musical skills go no further than hammering so to me the banjo is great! Keep producing your videos, you are a very talented tradesman and i learn a lot from you!

@jimhumphrey 6 жыл бұрын

Grand Ole Opry here comes John picking and forging! Good Job sir.

@MrJamesjustin 5 жыл бұрын

Mate that was great; definitely including the banjo.

@BlackBearForge 5 жыл бұрын

Thanks

@gilbertpurorock6267 3 жыл бұрын

Banjoooo is amazing good job!

@clausscheby8803 7 ай бұрын

Hi John I just ❤your banjo. Thanks for the video.

@cogpastorc 6 жыл бұрын

Hey, guess what. I kinda play the banjo a little, just when no one is around to listen. I wish I could play good, fooling around with it is somewhat relaxing. You did a really good job. Thanks for sharing with us. Terry from South Georgia.

@tonynewman777 2 жыл бұрын

Happy Thanksgiving many thanks to the Lord who provides and our home in heaven that he is made when we get there

@kennethmctavish248 2 жыл бұрын

Great video love the banjo

@markspc1 4 жыл бұрын

Nice banjo playing !

@gregsmith3289 6 жыл бұрын

Loved the banjo pickin.

@darrelrhame9351 6 жыл бұрын

Paddle,errr hammer faster I hear banjo music! LOL! Great video.

@gladhandsmith 6 жыл бұрын

Banjo playing blacksmith here. Thanks for the video. Have a need for a spring butcher and was thinking of forging one out in this style. I think you've convinced me not to waste the time for now and just to weld up a shank, a spring, and the dies until I can make the investment in a good guillotine.

@BlackBearForge 6 жыл бұрын

I think a welded version does make life easier.

@kochforgedon8022 6 жыл бұрын

Dog-gone-it John quit making things look so easy I love your videos that was a special treat at the end there awesome

@michaelhayes1678 2 жыл бұрын

Thank you for this video/tutorial/inspiration, and gratitude to "one of you troublemakers..." Two heads are better than one, and It's neat how the community helps each other with ideas. :)

@edwardsofin3593 4 жыл бұрын

Good Banjo, I have been a blacksmith for years and have only in the last year gotten serious about this craft. I play the Violin, actually Viola. Strung as a Viola C G D A. I cannot sing and accompany myself with a Violin. I have a Mandolin...maybe that is the answer. But yesterday I was looking at the old fashioned 1800's Banjos, five string Banjos...the model you have. And you also play it without a pick... I Am into this . Wonderful how it just happens to come up in a video by a Blacksmith I am watching today. Thanks for sharing

@jameslukac6951 4 жыл бұрын

Great work John, and great picking.

@billyproctor9714 6 жыл бұрын

When you said I'm not going to boar you watch me draw this out, I thought I bet he's going to use the power hammer. Made me respect you more that you fessed up, good man!! Billy

@BlackBearForge 6 жыл бұрын

I try not to BS anyone to badly. Although there are quite often things that happen off camera just to keep the videos from running way to long.

@timothymoore7890 6 жыл бұрын

That was a good and straightforward demonstration of simple tooling that will do the job. Very well done! Looking forward to the "tool to be especially proud of" edition!

@lenblacksmith8559 6 жыл бұрын

John loved the banjo was stomping my foot and clapping.

@ThePillenwerfer 6 жыл бұрын

Thanks for the tune.

@tonynewman777 2 жыл бұрын

That was very good play better than what I tried to when I was a kid... my aunt played the piano and sang at the Grapevine Opera Grapevine Texas all kinds of entertainers in when I went I would hang around the back saw the entertainers that was on Hee Haw she was friends with Lulu Roman and the church my Grandad then my dad pastured she would sing and play there we had our singing group called The New Man singers it was lots of fun. Sounds great I wish I'd kept it but my parents wanted to sell it so okay I probably tortured too many people with it.

@TheLoneWolfForge 6 жыл бұрын

Great video John! I liked your banjo playing also. I myself play the trumpet and bugle for veteran's funerals. Keep up the good work!

@trevorjarvis3021 2 жыл бұрын

Loved the banjo playing - as always most interesting content. 👍👏🇬🇧

@grandpafischer8317 6 жыл бұрын

Love that banjo music John. One of these days maybe I can learn to do smithing.

@travisjames1843 8 ай бұрын

I like the banjo music! I'm a musician myself!!

@paulorchard7960 4 жыл бұрын

When you said another 10 to 15 inches my right arm and shoulder went on strike! After the power hammer news I relaxed, not that I have one but hope that maybe one day.

@radionicsoftware5026 5 жыл бұрын

I'd be happy to play the banjo that well :-)

@saiak20121 6 жыл бұрын

The best! I’m a Russian beginner (I’m 69). A lot of thanks!

@jeffbarkett366 6 жыл бұрын

Another great video John!!

@amgironworks9091 6 жыл бұрын

You sound better on your banjo than I ever have on my guitar.

@jrgenc 6 жыл бұрын

Thanks John for sharing and making some great fun stuff. Love the banjo

@gavins649 5 жыл бұрын

I'm making everything from nothing to pursue my passion for smithing. I built my own forge and anvil, still have a long way to go. I'm working on my first hammer. My current hammer is a small claw hammer lol. You should add the banjo music to all your episodes!

@jasonvolkert1938 6 жыл бұрын

Great video. Don't sell yourself short, Your pretty good at that banjo!!!!!!!

@jacobdrescher1756 6 жыл бұрын

absolutly loved the banjo!!

@advance9572 6 жыл бұрын

Great tutorial. Love the banjo!

@Alanbataar 4 жыл бұрын

I just re-watched this video, and enjoyed it again. I had a thought which might make this type of hardie tool more useful. On the loop that goes into the hardie hole, if you make it long enough, it'll sick out the bottom of the anvil, and you can drive a wedge into it to lock it onto the anvil. It wouldn't flop around so much then.

@ButterflyMatt 5 жыл бұрын

Fantastic! Banjo and all. Learned a ton, and was entertained. Thank you!

@jasontoman-jones5039 6 жыл бұрын

awesome!! Love watching your videos

@madmodifier 6 жыл бұрын

Lets see some 3 finger roll :-) I tried teaching myself the banjo. It did not work out. Keep the great videos coming!

@BlackBearForge 6 жыл бұрын

I started off trying that style, but I much prefer Clawhammer and old time to Scruggs style and Bluegrass.

@standaffern6595 6 жыл бұрын

All kinds of talent!

@foxfire33333 6 жыл бұрын

Thanks, for an all around great video. I really enjoyed it.

@prepertruckin8525 7 ай бұрын

⭕️been watching your videos for a few years now... haven't seen all of them, but this should be an intro to your videos or at a minimum an outro ... hopefully you will consider it. possibly do a landscape scene with this overlaying. many talents brother... thanks for sharing

@jeanpomerleau8416 5 жыл бұрын

Good video, Great ending.

@GONE2VT802 6 жыл бұрын

Awesome John! Great video. Love the banjo.

@5x535 6 жыл бұрын

Another great video John. Thank you for sharing. Love the banjo!

@andreashjort8944 3 жыл бұрын

I know anything about vielding before this, and I got some banjo too! I subscribed, thanks for sharing your knowledge. Love from Norway

@lynnkerr372 6 жыл бұрын

Great domo as usual , thanks .

@xxxxxponchin 6 жыл бұрын

Wooow! good advice! and also good music! thanks, have a nice weekend 👍

@marbles430 6 жыл бұрын

Nice picking. Thanks for the information and techniques.

@tomjeffersonwasright2288 5 жыл бұрын

I like that you use simpler tools. Going from no tools to a set of usable tools, most of us can use a friends welder, and are more intent on having usable tools than on purity of technique. The purity can come later, when I have a real , usable hardy to use in the process, whether arc welded, hammer welded, or even super glued - if that will hold. When I see a power hammer, or any of the huge tools most smiths do not have, the video goes from being an instruction video to information only status, and I usually move on.

@BlackBearForge 5 жыл бұрын

Thanks for the comment. I'm afraid you will see power hammers and presses in some of my videos. They are a reality in many modern shops and folks new to them or thinking of buying their first big machine like to see how they might use those as well as hand tools. Most things done under the average power hammer can be done by hand, so its worth looking at the general procedure not jut the tools used. Most things can be adapted to hand work even if shown under a power hammer.

@dankeebler6171 6 жыл бұрын

Man great video, great idea. I love the no weld

@buckaroo8805 4 жыл бұрын

I love that anvil! And you really know how to utilize it.

@trampisporter9486 4 жыл бұрын

i normally use garage door springs that i have straightened out to make the spring for my fullers and swadges . i use tool steele to make the working end from the anneal it and drill it for the size of spring im using then insert the spring into the working end and bring to welding heat in the forge and weld. i adjust for alignment then re-heat and harden and temper. i have tools that i have made this way 30 years ago that i still use today.

@frankgallegos8048 3 жыл бұрын

Great job love your channel been watching for a while now you have been so helpful thank you for your time

@jetblackstar 6 жыл бұрын

Hah brilliant, needed a spring top/bottom fuller today. Will go ask and make this now. Not afraid to break out the welder, but having only learnt last year I appreciate those that can't. Do need to get a stock of 1 1/2" mild for tool stems. Also, from someone with zero musical talent but a good ear for tune, you play brilliantly. Tom foolery always very welcome in this channel, especially when it sounds that good.

@BlackBearForge 6 жыл бұрын

Thanks, I sometimes use square tubing or a "U" shaped piece of flat bar for hardy shanks.

@bazzi11 2 жыл бұрын

Awsome video and I’ll for sure make one of those! Thank you 🙏

@bruceprosser8332 6 жыл бұрын

Always enjoy your videos, great tips and practical application of your knowledge. Thank you!

@onecrowingrooster2239 6 жыл бұрын

Nicely done. More banjo😎

@JacobvsRex 5 жыл бұрын

I’m a less than ideal blacksmith but play banjo guitar and mandolin and I love some cripple creek claw hammer!

@user-lp5ch9pf4v 4 жыл бұрын

Black Bear Forge, ты делаешь очень полезное и благородное дело! Бог тебя не забудет! Спасибо!

@charlesmay8251 6 жыл бұрын

great job thanks for humoring me!

@BlackBearForge 6 жыл бұрын

Was that your comment? It was a great idea and I'll probably do another version that avoids all of the heavy drawing out but wuill require punching and riveting.

@grubkiller4616 6 жыл бұрын

little late any you might have seen this suggestion but make a slightly triangular piece that can fit through the gap in the hardy hole section and that should help with the bounce.

@BlackBearForge 6 жыл бұрын

I think for these tools just having a longer better fitting hardy shank would help tremendously. But I have made tools that use a wedge to lock them in solidly.

@ianturpin9180 6 жыл бұрын

What a pleasure to watch a master Craftsman teaching less than 400 to go for your 10000 congrats

@hometowngarage2060 6 жыл бұрын

awesome vid , the banjo playing was good to hear,as a younger guy i do listen to bluegrass when in my shop its calming

@larryking606 5 жыл бұрын

Great Video , a lot of good information , spring fuller's Can have a great Deal of Versatility ! Have a great Day AND Keep Hammering !

@daveyjoweaver5183 5 жыл бұрын

Thanks Much! I am learning tons from your videos and I greatly appreciate it! I am a guitar player and also dabble on the banjo as well. You do just fine. The important thing is to have fun in doing so. If your having fun then your a banjo player for ser! Thanks Again! DaveyJO in Pa.