Squaring a belt with worn edges
Рет қаралды 16,173
4 жыл бұрынLearn best practices on how how to square a conveyor belt with worn edges.
Flexco provides the world's belt conveyors with efficient, safe products, services, and solutions for splicing, belt cleaning, belt tracking, slippage and digital conveyor monitoring systems.
V0218_enUS_0218_SquareABeltWithWornEdge_0520
@elitesoccerblogs4947 3 жыл бұрын
thanks for the video. could you have just used the big square on the good side and drawn a straight line across the belt or would that be incorrect ?
@FlexcoTube 3 жыл бұрын
Best practice is always to find the average centerline of the belt and make your cut line based off of that. There is slight variations in belt width during manufacturing and the slitting process. Finding the average centerline gives a more accurate square cut line.
@Panchamoorthy84 2 жыл бұрын
👍👍
@michaeldixon3562 4 жыл бұрын
What are you using to mark on the belt with?
@FlexcoTube 4 жыл бұрын
Thank you for your inquiry, That is the silver ink belt marking pen. The item code is 01350.
@yl76 3 жыл бұрын
What if both sides have been worn out?
@FlexcoTube 3 жыл бұрын
If both sides of the belt are too worn then you can not accurately find the center of the belt so you will not be able to create an accurate square line. There is a time when the belt just needs to be replaced to ensure proper conveying characteristics.
@devinwhitaker8467 2 жыл бұрын
@flexco tube TELL my boss that
FlexcoTube
Рет қаралды 15 М.
超人夫妇
Рет қаралды 21 МЛН
Cement Industry - an overview
Рет қаралды 4,9 М.
notebook-31
Рет қаралды 137 М.
PRO Hi-Tech
Рет қаралды 101 М.