SQUEAKY CONTROL ARMS / SUSPENSION / SIMPLE HOW TO FIX / DIY

  Рет қаралды 30,878

DIY WISE

DIY WISE

9 ай бұрын

IN THIS VIDEO I FIGURED OUT MY SQUEAKING NOISE WAS COMING FROM MY CONTROL ARMS . I SHOW YOU HOW I RESOLVED THE PROBLEM WITH A SIMPLE FIX / PRODUCT.
Disclaimer for DIY WISE
We are doing our best to prepare the content of this site. However, DIY WISE cannot warranty the expressions and suggestions of the contents, as well as its accuracy. In addition, to the extent permitted by the law, DIY WISE shall not be responsible for any losses and/or damages due to the usage of the information on our website.
By using our website, you hereby consent to our disclaimer and agree to its terms.
The links contained on our website may lead to external sites, which are provided for convenience only. Any information or statements that appeared in these sites are not sponsored, endorsed, or otherwise approved by DIY WISE. For these external sites, DIY WISE cannot be held liable for the availability of, or the content located on or through it. Plus, any losses or damages occurred from using these contents or the internet generally.

Пікірлер: 41
@koenig12
@koenig12 Ай бұрын
thank you so much! I've had it in to 3 shops and no one can figure out what to do. they've charged me for wheel bearings and suggested all new control arms. 40k miles.. you literally did the same test i did to make it squeak. thank you, I didn't even know WD40 made that!
@diywise
@diywise Ай бұрын
Sorry you had to deal with a bunch of people that couldn’t fix your problem. Glad it was helpful!
@johndonovanrichardsondjsty1866
@johndonovanrichardsondjsty1866 29 күн бұрын
Just like of the rest of the comments... A BIG THANK YOU. Regardless of how tiny an issue you run across, we greatly appreciate any issue fixes you run across. Especially for us 1st time to RAM owners.
@reghoho
@reghoho 18 күн бұрын
great tip. worked. turning the wheel gave better access. lay down on a piece of cardboard. didn't need a hoist
@diywise
@diywise 18 күн бұрын
Glad it helped!
@Ash-hn9rm
@Ash-hn9rm 2 күн бұрын
My '03 1500 is having that same squeaking problem. I'll try this and see if it works. Thanks for the video!
@diywise
@diywise 2 күн бұрын
Appreciate you watching! Hopefully work for you also!
@Yulmeister007
@Yulmeister007 3 ай бұрын
Thanks for the vid. Will try this on my tacoma. Just started making this noise at 150K miles. Mine are doing it from age, judging from the exterior of your truck, yours were probably so new they were squeaky clean! 😂
@diywise
@diywise 3 ай бұрын
lol. Mine is a 2019 with about 60,000 miles. I sprayed them again about a month later and haven’t done it since. So it worked well for me. Thank you for watching.
@2Cups214
@2Cups214 4 күн бұрын
Cool video thanks!!!!
@diywise
@diywise 4 күн бұрын
Glad you like it. Thanks for watching!
@pieguy279
@pieguy279 2 ай бұрын
This sounds like a squeak I have as well, will definitely get some lube and see how it goes, great video !
@diywise
@diywise 2 ай бұрын
It worked great in my application. Applied it again about a month later and haven’t had any issues since then. Thanks for watching!
@SanchoGracie
@SanchoGracie 2 ай бұрын
My Hummer just developed that creak after a camping (off road) trip. Walmart bound.
@diywise
@diywise Ай бұрын
Did you get it fixed?
@robcbr91
@robcbr91 2 ай бұрын
Mine is doing h the same thing. Did you ever replace the bushings? Did the noise come back???
@diywise
@diywise 2 ай бұрын
No, the noise has gone away. I applied it heavily the first time and had to do it again about a month later. The noise has not come back.
@robcbr91
@robcbr91 Ай бұрын
I tried everything nothing worked until I replaced the LOWER ball joint. It 100 percent sounds like rubber on rubber but it was not. This was on my 7” lifted Chevy Silverado 2017
@saltysteel3996
@saltysteel3996 20 күн бұрын
​@@robcbr91 That noise is almost always a bad ball joint or bad tie rod end.
@ryanbarfield5540
@ryanbarfield5540 28 күн бұрын
With the technology that we have today why haven’t they a better type of bushing that doesn’t squeak
@saltysteel3996
@saltysteel3996 20 күн бұрын
Every time I've had that noise it was either a bad tie rod or a bad ball joint.
@diywise
@diywise 20 күн бұрын
Not in this circumstance, haven’t had any issues since it was sprayed a couple times.
@mikegayda715
@mikegayda715 Ай бұрын
Had brand new bushings installed polyurethane, they squeak like crazy I bought the same stuff
@diywise
@diywise Ай бұрын
Did it work for you also?
@FuriousDozenGaming
@FuriousDozenGaming 8 күн бұрын
yo! did it work?
@laurellee6674
@laurellee6674 8 ай бұрын
P r o m o S M 🙂
@wrenching5483
@wrenching5483 4 ай бұрын
My 2006 4x4. Same noise
@Livinlife2
@Livinlife2 Ай бұрын
Doesn’t the upper control arm have a nipple for greese or is that just something else ?
@ryanbarfield5540
@ryanbarfield5540 28 күн бұрын
The grease fittings are for ball joints on the control arms. A lot of the newer vehicles have sealed ball joints that can’t be greased
@saltysteel3996
@saltysteel3996 20 күн бұрын
​@@ryanbarfield5540 And the ball joints have plastic cups now (garbage). Replace them with grease-able metal-on-metal ball joints like Moog Problem Solvers.
@benjaminlambert8944
@benjaminlambert8944 2 ай бұрын
Was the answer “don’t buy a Chrysler”? Jk. My ford has these squeaks too. Going in Thursday to have them fixed. Annoying!
@cross8215
@cross8215 2 ай бұрын
Did you ever fix it? What was the issue
@parsingh559
@parsingh559 6 ай бұрын
Sweet still no squeak?
@diywise
@diywise 6 ай бұрын
Lasted a couple months and coated it a little more one time in certain areas and it has been good ever since.
@Jetplane420
@Jetplane420 2 ай бұрын
Did that and still squeaks
@diywise
@diywise 2 ай бұрын
Were you able to isolate exactly where the noise was coming from? Mine was coming from the rubber bushings making contact with the metal. I sprayed them pretty heavily and made sure it worked its way in…
@sczzlbtt
@sczzlbtt Ай бұрын
Able to access the upper control arm from the engine bay? What in the mickey mouse phuk
@vulcanman64
@vulcanman64 22 күн бұрын
Won’t last long, you’ll be needing a new upper control arm soon.
@diywise
@diywise 20 күн бұрын
Not the case, it is newer. From what I read a lot of the rubber that they used in certain control arms will produce this noise.
@Kaneguy
@Kaneguy 2 күн бұрын
My Tacoma developed a horrible squeek in the LCA bushing at 170K miles. I lubed the bushing twice with liquid wrench and the squeeking stopped temporarily. The WD40 product looks like it may last longer but I think the squeeking is likely to return after a period of time. Still, its worth a try until you can get around to replacing the bushings.
@diywise
@diywise 2 күн бұрын
With a 170,000 miles that would be expected to replace by then. They are shot by then
How to Tell if Your Tie Rod is Bad
4:07
ChrisFix
Рет қаралды 10 МЛН
How to use a Camber Tool
3:34
Subearu
Рет қаралды 14 М.
Я нашел кто меня пранкует!
00:51
Аришнев
Рет қаралды 3,4 МЛН
FOOLED THE GUARD🤢
00:54
INO
Рет қаралды 64 МЛН
Me: Don't cross there's cars coming
00:16
LOL
Рет қаралды 8 МЛН
How to Fix Polyurethane Bushing Squeak Permanently
3:51
StudioVRM.Racing
Рет қаралды 167 М.
Fix Steering & Suspension Noises or Sounds - Clunking Shaking Vibrating
7:21
How to Replace Control Arm Bushings (EASY)
10:05
ChrisFix
Рет қаралды 8 МЛН
How To Find Suspension Noises 101 - EricTheCarGuy
23:57
EricTheCarGuy
Рет қаралды 4,2 МЛН
2019 Ram 1500 Front suspension noise fixed  (CHEAP)
10:14
Arsenault's Garage
Рет қаралды 34 М.
Knocking Noise From The Front - Found & Fixed - Possible Causes Listed
6:24
What Squeaking Ball Joints Sound Like
1:33
Barbour's Auto Help
Рет қаралды 450 М.
Fix squeaky car bushings/suspension with At-205
11:00
Matt's Finds
Рет қаралды 74 М.
В поисках семьи😢😱
0:56
Следы времени
Рет қаралды 9 МЛН
😆 @SantiOficialll @SantiFansshort @CAMILOAGUILLONN
0:15
Santi
Рет қаралды 4 МЛН
Вор в законе заступился за официантку  ...
0:59
Сериалы 🍿
Рет қаралды 9 МЛН