Application and blending - Standox Basecoat
Рет қаралды 11,926
3 жыл бұрынStandox Basecoat is the established and well known solventborne basecoat technology from Standox. After more than 30 years of success, this quality is still called “painter’s best friend” in a lot of markets around the globe. Because of this, our latest release of the STANDOVISION training video edition focusses on Standox Basecoat and it’s most efficient and professional use. Learn more about the general application, best practice blending technique and take some of our expert’s advanced tips and tricks to achieve excellent mottling control.
@Shauncat1 3 жыл бұрын
This is amazing Tony, most spray painters here in South Africa, especially in Durban my hometown, have forgotten the basics of painting Standox solventborne paint
@glbn6832
Could you explain the process or make a video about 3stage pearl with hardeners for Standox solvent base coat. Thanks
@andicog 3 жыл бұрын
Used standox a lot, liked it but we did used to have bad mottling on certain colours on bonnets and roofs, used to re thin and drop coat, not seen clear base, we used to coat the blend panel with fade out thinner before starting, this cut any static marks and let the base lay down near the blend edge, only big greif we had was the lacquer darkening up the blend panel edge on silvers and light met blues, standox answer was to 2 gun and use thinned lacquer on the blended panel edge.
@javierdelafuente8158 Жыл бұрын
Where can I buy your products in Madrid Spain?
@deanholloway7755 2 жыл бұрын
Why would you take the risk with that tight door push blend and not just go into door blend. At least you can then guarantee the colour without any problems 100 percent of the time for the sake of a yard of tape and 5 minutes prep. This is what happens in loads of big shops who want to save 10th paint and scream when one goes pear shaped. Madness.
Anest Iwata Refinish
Рет қаралды 27 М.