Standoblue - How To Control Mottling

Рет қаралды 38,467

5 жыл бұрын

Painting a bonnet with Standoblue is easy if you follow our technical datasheets, but if you do need to fix some clouding and mottling problems with tricky colours, then you need to know the best way.
For more videos subscribe to our channel or visit bit.ly/2wScn8F

Пікірлер: 34

@raulvello4052 5 жыл бұрын

Nice to see really proffessional explanation and simplissity to work with Standoblue!

@damxgopak457 Жыл бұрын

Watched Several vids on this subject yours is by far the best thanks .

@StandoxOnline Жыл бұрын

Glad it was helpful!

@DjDanijaynj 4 жыл бұрын

Esta es la manera correcta y bien explicada de como aplicar la base de color...

@user-cg3em1uc7f 5 жыл бұрын

Hello my teacher! It's a very good video instruction! Well done! Like put :)

@khmermafia781 3 жыл бұрын

thank you

@mescalp 4 жыл бұрын

Very nice..makes sense.

@mohdsameer-de9hq 4 жыл бұрын

Very good spray hood👍👍👍

@jrv858 3 жыл бұрын

This helped alot thank .....painted silver with no issues using this technique

@StandoxOnline 3 жыл бұрын

Thanks, we are glad it helped...

@JasonVoorhees-je9xc Жыл бұрын

Very well explained!

@StandoxOnline Жыл бұрын

Glad it was helpful!

@topstar3 2 жыл бұрын

Quite helpful thank you!

@StandoxOnline 2 жыл бұрын

You're welcome!

@edilsonaraujo1118 2 жыл бұрын

very good these pistols from Sat and 10., here Nova Friburgo RJ.

@gayyad1978 3 жыл бұрын

Very helpful video and keep making more videos 👍

@ANDY-we7mr 8 ай бұрын

great vidieo thanks for sharing that i painted a bonnet ages ago got tiger stripes and mottling

@StandoxOnline 8 ай бұрын

Sounds great!

@dentalert 4 жыл бұрын

Excellent method 👍🏽

@garypostell5268 Жыл бұрын

THANK YOU 🙏💯👍🇺🇸

@StandoxOnline Жыл бұрын

Very welcome

@zanaga1901 2 жыл бұрын

What tip do you use for a metallic base and a high solids glamour clear I have a 1.7, 1.3, and 1.4 tip lvlp spray gun. And a 1.8 hvlp still I think I use a small air compressor about 26 gallon 5 hp about 5.4-5.6 cfm. I have the Rongpeng professional spray gun that what will be using now.

@StandoxOnline 2 жыл бұрын

Hi, we are afraid we are not familiar with the equipment you mention but for your information our technician used a 1.2 for waterborne basecoats and depending on this type and viscosity of the clearcoat, he used either a 1.2 or 1.3 set up in a compliant spraygun.

@michaelb3523 8 ай бұрын

Solvent so much easier

@jamesofallthings3684 Жыл бұрын

Wish my shop had panels coming to me in that good of condition. I'm constantly fighting 320 scratches when painting metallics. Of course it's my problem if they show through so I either have to use more paint or waste time priming and sanding doing the panel beaters jobs for them.

@StandoxOnline Жыл бұрын

Sorry to hear that, good preparation akes all the difference to the final job and the amount of effort involved. Good luck.

@javierrodriguez897 2 жыл бұрын

You said if your last coat is already flashed off, then it is to late for a control coat. But what happens if you do put a control coat on a already flashed coat?

@StandoxOnline 2 жыл бұрын

Thanks for your question. Applying a control coat over a dried/flashed off surface will cause a cange in colour and effect pigment laydown, creating a coarser efect. It may also lead to die back of the clear coat due to an increase in surface roughness.

@garypostell5268 Жыл бұрын

I do have a question why not do the whole hood instead of one half at a time ?

@StandoxOnline Жыл бұрын

Thanks for asking this question. By following this process you will be able to master the application also under more sever climate condition, e.g. higher temperature or low humidity. If spraying the whole bonnet at once and depending on the size of the object and local climate conditions it can be that your first coat might start to flash off before you finish your effect coat.