If me spending $10k on used parts doesn't get you SMASHING that like button, I don't know what will!!

A running engine and a 2nd baby on the way ?!?!? DOUBLE CONGRATS!!! 👏👏👏👏👏👏

I really appreciate you taking time to explain the planning phase of the build, the steps to be taken. Puts all the manual labor into perspective... you take on a lot mate. Hats off !

Your wife coming out to show her support really means a lot. Kudos to her. 👍

You can see the relief on his face when the motor started. You're on your way to having this on the road, bro.

You had me on the edge of my seat with the cold start... 😂 Keep plugging along. The videos look great!

You blow my freaking mind with this series and how hard you work. You're a very talented man.

From an Amazon electric motorcycle to a McLaren. Wow, impressive bro. Keep up the quality content.

At least the engine runs now, that's one big headache out of the way. Take your time to put it together! Looking forward at the finished result!

17:05, I really noticed that smile on my face😊

Great the engine starts!, and your reaction 🤠 Hope all goes well with the parts etc and i am looking forward to the course of the build! Keep up the good work.

From the days of the FZ6 videos, your first cafe build, and everything in between then and now, its been great to see you and your channel grow and thrive. A lot of hard work in both the vehicles but also in your channel! That devotion is paying off! Keep up the great work.

I am absolutely enjoying this pivot in your content creation. Good job sir 👍

Keep building your dreams! Been watching your videos since your early e-bike review days years ago, now look where you're at... keep going!

What a bad ass car! Looking forward to watching this build over time

You rock bro. Keep up the good work. Rly looking forward for next clip 😎👍

So stoked to see it start!

Great video. I love watching this before going out and working on my 600LT!

Glad to hear that motor start up. Looking forward towards the advancements of getting your car back on the street. Congrats on the new edition to the family as well.

Good luck man I pray you get it on the road soon as possible 🙏🏼 💪🏼 🙌🏼 👍🏼 💯 👌🏼

Great video look forward to part 3👍👍👍👍

Congrats so far. It's not really hard to tell that you'll hit the road with it pretty soon. You got endurance with all the stuff. Your efforts will pay off at the end for sure. thumbs up 👍💪😁 Be looking forward for the next video.

your doing a greatjob... ill keep watching

Videos look great, man. Excited to see how this progresses.

Dude mad respect to take on a project like this with no lift, or garage. Been there, done that and it totally sucks! Subscribed!

Inja you ROCK!!! I crossed my fingers when you went to start it and said if anyone deserves it to be a running car he definitely does. So glad it does and now you can move onto making it whole again in true Inja style LOL BTW I love the color as most exotic cars seem to be RED, yellow or black. Nice seeing a deep metallic burgandy. keep up the good work brother and CONGRATS on the newest member that should be here soon! Happy Holidays

Well done mate keep up the good work

How Cool was That ,Even your Misses Was excited it Fired Up , Classic

man, this car's great you're getting all the good excuses to buy new tools/toys and order exotic car parts from the internet and you're learning and you're sharing with us while making a few bucks seems like a win/win deal if you ask me Thanks, Inja ! thatll be a great project to follow

Keep up the hard work ! This ride is going to be amazing

Thanks! Been watching since the crazy chinee car videos, great fun!

Great video series!

It's coming along great mate an I'll see you on the next one

I love how far you have come and I love the t shirts you wear!

I'm excited for you bro!

Great project! The last time I saw this channel was a few years ago when you're in Fresno and now moved on up to Clovis.

Amazing so pleased for you🎉 love the wheels on it 😊

I'm really enjoying you Channel and I wish you all the best Good luck with the Build

Well done so far !

Congratulations!!!

Nice work!

Inja my boy, the car sounds really great and congrats on the new baby. God bless Bro.

Your shirt got you a subscriber! Guns and cars are the way! I’m binging the episodes now to get caught up. Good luck brother!

very dope project my dude.👍

Congrats on the new addition to the Inja clan may he/she be happy and healthy!

No blue smoke on first start! Excellent!

good luck!!!!!

I gotta admit im happy it runs. Best of luck going forward with this

Sounds great!

Happy for you ❤😊

Congratulations 🎉🎉🎉🎉 on the new family member ❤

Man seeing you go from a casual e bike/Chinese sportbike channel to a full blown multi motorsport channel with supercars?😮 u inspire man!💯

From Greece have many wishes to complete the project. Welldone men

This is actually exciting.... I love it good program.... 😅

Fire sauce!!!!! sounds NOICE!!!

yes!!!! more videos

Amazing project!

Hey, I just found your channel and I have to say that you and your content are awesome! I saw your first MCLAREN vid and I became a fan of yours instantly. especially when you named some other you tube car influences. I loved the "Driven Daily Exotics" LOL!. I am a huge DDE fan. " Daily Driven Exotics" I can't wait to see what you do to your new car! Love from Ontario Canada.

How did this McLaren make it to so many places and NOT get robbed of all its parts? What a great find!

You got me hooked....😂

Can't wait for the next VID....

Hallelujah! How fresh is it that it isnt a $47k lawn art! Get R Done right now, ie no bondo. Congratulations on the car and the family.

The video qualities very good, appreciate your hard work

😎Big Kahunas to go in on this with a new-born on the horizon. BIIIIIIG respect 👍

Speaking from experience with McLarens and track racing, the gas in the oil is a sign the valve guides need to be changed, there dried out or cracked. Its not the absolute end of the world, but can risk the engine if ignored. Worst case situation could be the piston rings could explain the missifre though, checking the plugs for fowling/oily, will tell you.

To fix broken bosses and cracked fastener holes...fiberglass insulation mixed with 2-part epoxy works well.

Nice to see the engine running that’s huge 🎉🎉

You won my sub bro!

Good brother I just wanted to to see that mclaren finish 😎😎🤩🤩

“I’m ok to spend this much” that was determined to be a lie 🤣🤣 Just got recommended your channel the other day, looking forward to more episodes of this build

If you say it’s gone back to the default right hand drive settings, maybe see if there is a wiring loom in the right hand door to plug the switch into, it may help you open the engine cover🤷🏼‍♂️

I wish you the best rebuilding your Mc!

I hope more people come back to the channel

The look on your wife's face after hearing the car run was priceless! She's gotta be the coolest wife in the world, I'd say she's a one of a kind lady and you should let her get the first drive of the Maclarein just for allowing you to be able to buy this gamble of a vehicle buy lol

I'm going to subscribe and share

Very good. 😊

That ziptie extension cord under the hood, I think the previous owner tried to hardwire (run power/hot wire) power to the driver door (trunk latch power wire) in order/attempt to get the engine compartment latch open. If I were you, I'd go ahead and order everything. What cool about supercars (Mclaren/Lambo) everything can either be fixed or replaced. You're gonna love this build (adventure/project). I'll purchase the vehicle from you should you ever consider to sale the vehicle in the future?

Putting blocks in front of the front wheels while the car is jacked up and on the ramps might be a good idea

The nuts holding the speakers are called riv-nuts. They work similar to pop rivets. It would be easy to fit the next size in and file down the bolt heads to suit the speakers.

I envy u coz ur so knowledgeable… gud luck w/ d maclaren..

Please continue and document your journey 🥂

I like the direction you going. Big improvement. Just don't go down the same route as some KZfaqrs and start doing car lottery's. Keep up the good work 🔥💀

Gratz on kiddo No.2!

Good job pro

Im pretty sure you can replace the nutserts for your speaker with new ones, then hold the old nutserts with grips to get the fixings undone

tips: the button is activate with 2 wire conectivity so plug out the wire out the socket and touch each others for electricity shocks because button exactly do it, and test if open or not :))

The oil smelling like gas is not a problem just keep up on the oil changes. When you pull your spark plugs there going to have oil on them as well don’t be alarmed. It’s a mclaren thing 😊

There’s not a test function on your autel for the engine cover? Cheers Pat 🇦🇺

21k days overdue for an oil change? That's 57 years..... I dunno if I'd rely on that service notification completely 😂

If you haven't update the firmware on the Autel, might add some functionality you wish you had now. My old Autel when it was new there were updates to add newer cars and I was able to cross flash it to a identical looking model that supported a lot more functionality. I doubt there's too many better versions than what you have. It's great seeing you be able to get another dream car, even if you had to get a rebuilder.

Good luck with the new baby

Very interesting on the door 😆

Sounds alright from a cold start

service date exceeded by 57 years, damn.

Love the content are you Ontario based btw? I see the timmies cup 😂

Just subscribed from the UK, love the McLaren you've got. If I can help with parts I'd be glad to help we have a lot of 650s smashed in breakers here.

Did you try Mullins Auto in Mt Olive, IL? They have Exotic parts, I think Tavarish got parts from them before. Good Luck.

Freaking sweat! The second it started up it was like a shockwave. But man, the "Supercar tax" for all those parts is intense.

Subscribed from England UK for the McLaren project. Really enjoying it so far. Although that engine lid would drive me insane.

Use panel bond on your riv nuts. And the sand the paint off the door first. You won’t have that problem again.