No video
Step-by-Step Guide: Installing levers on your Harley.
Рет қаралды 22,517
Күн бұрынHow to remove and install new brake and clutch levers. THE EASY WAY!
In this video I remove my stock clutch and brake levers on my Harley-Davidson Dyna Lowrider S (FXDLS) and install new Joker Machine Levers.
Links to the Joker Machine Levers below:
jokermachine.c...
jokermachine.c...
@larrychavallo5377 Ай бұрын
Good job on the directions! I'm absolutely not a mechanic either, so I need simple instructions & this was perfect. I'll be saving this video & looking for more that is needed in the future from here. Thank you!
@thebikeofeli Ай бұрын
Glad it helped!
@diller58 11 күн бұрын
Thanks just changed mine after watching this with in 15 minutes
@thebikeofeli 11 күн бұрын
Glad it helped!
@eseltz 13 күн бұрын
Thanks for the vidieo. I have a 2018 Fatbob and I ordered a brake and clutch lever.
@thebikeofeli 13 күн бұрын
@@eseltz no problem. Glad you liked it.
@Hadsatriani 2 ай бұрын
Hey thanks a million! I just got Danger boy leavers, and looked at bike thought hell no, BUT this video is most defiantly changed my mind and saved from paying someone to do! So i will try n the morning! Thank you
@thebikeofeli 2 ай бұрын
Glad it helped! It’s very easy to do! I did mine with 1 hand while filming simultaneously!
@matthewgeest7138 Жыл бұрын
I've been wanting to swap my levers out for shorty levers, great video!
@thebikeofeli Жыл бұрын
Thanks so much! Hope it helps!
@petergalia4751 Ай бұрын
Great video bro, thanks for the helpful tips, getting those retaining clips on was the hardest part 😂
@thebikeofeli Ай бұрын
I definitely agree lol!
@RJ-ik7us Ай бұрын
Thanks for the info bro much appreciated.
@thebikeofeli Ай бұрын
No problem. Glad it could help!
@michaeljsmith1230 Ай бұрын
Recommend just using a flashlight when pointing out the break light switch. Other then that, the video was great, thanks.
@thebikeofeli Ай бұрын
Thanks for the tip! Glad you enjoyed the rest of it.
@scottlin777 Жыл бұрын
Looks better and better each time
@thebikeofeli Жыл бұрын
Thanks Scott! A lot more to come!
@liamdixon8163 Жыл бұрын
Brilliantly done real easy levers are awesome 💚🇮🇪☘️🙏
@thebikeofeli Жыл бұрын
Much appreciated!
@saveurselves989 10 ай бұрын
Good job, your camera was off a bit in clutch side, I do it just like you, very slow and carefully!
@thebikeofeli 10 ай бұрын
Thanks! Yeah it was tough to film and do it at the same time.
@adamr182 2 ай бұрын
This guys heavy breathing gave me a heart attack. Lol
@thebikeofeli 2 ай бұрын
Glad you liked the video
@levasseurhealth886 Жыл бұрын
Nice bike, nice video! Thank you!
@thebikeofeli Жыл бұрын
Thank you! I appreciate the support!
@PaulMowrey-hz3hi 3 ай бұрын
Great video
@thebikeofeli 3 ай бұрын
Thank you!
@OSOFLHP 6 ай бұрын
Hit like button before you watch video, step one remove mirror, drop on concrete, next use screw driver to remove circlip......
@thebikeofeli 6 ай бұрын
Hey, got the job done and it’s one of my best performing videos.
@thebikeofeli 6 ай бұрын
I appreciate the engagement with the video though. It helps the algorithm.
@OSOFLHP 6 ай бұрын
@thebikeofeli brother in law was working for joker, gave me a set of those levers, started to install yesterday bought new pins realized I needed bushings, got new clips what's the other big hole for?
@thebikeofeli 6 ай бұрын
@@OSOFLHP what other big hole?
@OSOFLHP 6 ай бұрын
@@thebikeofeli cool, didn't finish watching,
@5PenniesShaw 8 ай бұрын
I love your video, but where can I get two of those retaining clips I can’t find them anywhere and you know somebody touched my stuff so of course they aren’t there now ugh
@thebikeofeli 8 ай бұрын
Hahahah you must be married as well! Any hardware store should have them, just bring the pin it to make sure it fits. If not then the Harley dealership will have them for 8x the price 😂
@johnrayfield2375 3 ай бұрын
Love it. Subbed.
@thebikeofeli 3 ай бұрын
Much appreciated!
@MW-do5xw 7 ай бұрын
Couldn't see everything because of the camera angle.
@thebikeofeli 7 ай бұрын
Yeah it was tough to hold the camera and complete the project at the same time. My apologies.
@MW-do5xw 7 ай бұрын
Yeah just some feedback.
@thebikeofeli 7 ай бұрын
@@MW-do5xw any feedback is appreciated!
@Anonymouso283 6 ай бұрын
@@thebikeofeli He is being an overdramatic dumb ass. You did your video great, I just installed brand new black levers on my 05’ Dyna, thanks to this video, easy peasy. Buddy who commented “you can’t see anything because of the camera angle” has no brain 😮😊
@Jasonraggadog 10 ай бұрын
Thanks bro
@thebikeofeli 10 ай бұрын
Hope it helped!
@HD-pp2hp 4 ай бұрын
Ladies and gentlemen, if you've never heard a mouth breather, you have now
@thebikeofeli 4 ай бұрын
Very constructive comment. Glad the video helped you out.
@seanw1392 2 ай бұрын
ummm... when you were installing clutch lever you had the clutch off video so couldn't see it.
@thebikeofeli 2 ай бұрын
Yeah…tough to film and do it at the same time.
@taylort6648 4 ай бұрын
What tools did you use to break the clutch lever cable
@thebikeofeli 4 ай бұрын
I think it’s a 10 and an 11 crescent wrench.
@marathonrefrigeration9593 Жыл бұрын
I'm curious as to where Joker Machine parts are made.
@thebikeofeli Жыл бұрын
They’re out of Lake Havasu, AZ.
@marathonrefrigeration9593 Жыл бұрын
@@thebikeofeli thank goodness...more reason to trust the workmanship . When It comes to riding I don't want to mess around and have something snap off while I'm riding . I've seen some pretty cheap stuff come out of overseas items.
@thebikeofeli Жыл бұрын
I definitely have as well! I can say for certainty the quality on these are top notch. Lightweight and durable. I’m going to do a review video on them in a month or so after a few 1000 miles.
@OSOFLHP 6 ай бұрын
Lake Havasu Arizona
@bngately5757 Жыл бұрын
Do you have the links for the front and rear fenders; and the bags on the Street Glide
@thebikeofeli Жыл бұрын
I don’t unfortunately. I tried to find them, but came up short.
@ROGERVELAZQUEZ1 Жыл бұрын
Looks great ,you made it look easy !!👍
@thebikeofeli Жыл бұрын
@@ROGERVELAZQUEZ1 that’s the beauty of editing lol. I should do a fail compilation for all my projects 😂
@user-rc9tv9zm2u 9 ай бұрын
Good video, spend a couple bucks and buy some snap ring plyers.
@thebikeofeli 9 ай бұрын
That would make it tremendously easier!
@makariussulit 8 ай бұрын
You took that lever off too easy lol
@thebikeofeli 8 ай бұрын
😂 the entire bike is very simple. It’s just nuts and bolts.
@catsak1 Жыл бұрын
Do you realise the clutch side is off camera while you’re removing?
@thebikeofeli Жыл бұрын
Yeah, kind of hard to film while removing a clutch lever.
@08StreetGlide Жыл бұрын
@@thebikeofeli Tri-pod...
@thebikeofeli Жыл бұрын
@@08StreetGlide good idea
@heritage_cowboy6568 Жыл бұрын
Video too dark, can't see
@thebikeofeli Жыл бұрын
Did you try turning up your brightness on your phone?
@engscott78 4 ай бұрын
Thumbs down the second you say to hit the thumbs up.
@thebikeofeli 4 ай бұрын
Oh nooo 😂👍🏼
@rogerbuesing9374 Ай бұрын
Why??? It helps the guys channel out with the KZfaq algorithm! Next time you go to work…don’t punch in on the time clock…sure you’ll enjoy working for free…
@hunterw.4603 Ай бұрын
@@rogerbuesing9374choice of work not our problem
@rogerbuesing9374 Ай бұрын
@@hunterw.4603 what does that even mean??? Try making a cogent statement!
@user-nq1vd8df8z 2 ай бұрын
your filming was mostly off screean your editing of this video bites.
@thebikeofeli 2 ай бұрын
Your videos are pretty well made …. Lol
@thebikeofeli Ай бұрын
Feel free to never watch it again
@joshlego4775 3 ай бұрын
you breathe so hard in your videos. Thats my only complaint. Its hard to listen too bro. Youre huffin.
@thebikeofeli 3 ай бұрын
Feel free not to watch! Trying to film, narrate and wrench on the bike simultaneously is not as easy as it seems.
@paultaylor4260 Жыл бұрын
Great video
@thebikeofeli Жыл бұрын
Thanks Paul!
Being Here Now, with Percy
Рет қаралды 8 М.
Moto Blonde
Рет қаралды 60 М.
Ride it Wrench it
Рет қаралды 91 М.
lowbrowcustoms
Рет қаралды 39 М.
Ryan Urlacher
Рет қаралды 138 М.
ThatMotoGal
Рет қаралды 5 М.