CNC Router Raised Panel MDF Doors With Vectric V Carve - No Special Tools, No 3D Tool Paths

CNC Router Raised Panel MDF Doors With Vectric V Carve - No Special Tools, No 3D Tool Paths - EASY!

Рет қаралды 6,403

10 ай бұрын

We get asked how to make MDF Raised Panel doors on a CNC router without the use of a 3D model, molding tool paths, or special form tooling. In this video, I will show you how to design and program a raised panel door using a standard V bit and a Down-cut endmill. This can work on any CNC router and will work with Vectric V Carve and V Carve Pro.
You can download the Vectric Files (in V Carve Pro) here: bit.ly/3swSXWH
If you need it in another format, please email us at info@stepcraft.us
www.stepcraft.us

Пікірлер: 14

@JamesSmith-zq9kx 4 ай бұрын

Great video! Just did an inset flat panel and came out perfect!

@thirteenbravoflagsandwoodworks 10 ай бұрын

Well done. I was asked by a customer to do a kitchen remodel and could not figure out a way to accomplish this and had to turn the job down. Very useful information for the future! Thanks Eric

@StepcraftInc 10 ай бұрын

Glad I could help. I am working on another video now regarding Doors but without V Bits and allow for more customization

@terryhuber327 10 ай бұрын

Outstanding! Thank you Eric

@StepcraftInc 10 ай бұрын

Glad you liked it!

@Alya61 10 ай бұрын

Hi from Türkiye. Thanks for the video. The fact that you managed to achieve such impressive results without the need for specialized tools or complex 3D tool paths is truly impressive. I'm curious if your CNC milling machines in the D and M series are compatible with Alphacam. Do you have a Post Processor developed for this? Is there any other channel, similar to the "toolstoday" , creating Turkish for Stepcraft, aside from Stepcraft Turkey? Best regards..

@StepcraftInc 10 ай бұрын

I am not familiar with Alphacam. Email support@stepcraft.us and we can look into it for you. I am not aware of any other channels like Tools Today... I am sorry

@ABFextension 5 ай бұрын

why you dont use profile inside by vbit tool- with corners (sharp internal corners)

@alterstassfurter5743 10 ай бұрын

can't wait for my M1000...1st I have to finish my workshop in the basement...👍👍

@StepcraftInc 10 ай бұрын

We are excited to have you as part of the family! Let us know how we can help in any way!

@ericdevarney4089 6 ай бұрын

there is a much easier way to do this, no need to use profiles. Everything is done in Modeling

@acerjuglans383 10 ай бұрын

I watched a video last year, and was able to do basically what you just did, but I used two V bits--90 and 120--and a 1/4" endmill, plus a 1/8" compression for the profile cut. I also made fake vertical lines between the stiles and rails, so the whole door looked like a true 5-piece door. kzfaq.info/get/bejne/hpZ0qcKa3b3Sn30.html

@StepcraftInc 10 ай бұрын

I never saw this video before. Very good info. I released a new video today that uses the molding tool path in V Carve Pro and I also added info about how to make the fake vertical lines. Thank you for sharing.