DIY Harley Davidson SaddleBag Wall Storage Rack Cheap

Рет қаралды 29,650

6 жыл бұрын

You asked..You got it! You can make this saddlebag storage rack that hangs on your wall vs. the floor for under 20 bucks. I'll give you the exact measurements and the parts you will need in the video. Save a ton of money and keep your saddlebags off the floor.
Parts I used are 2 x 3/4"x10' pvc pipe
12 x 3/4" 90 degree pvc elbow
6 x 3/4" pvc Tee
2 x 3/4 pvc end cap
3/4" pipe insulation
2 x 1" 2 hole strap bracket
2" lag bolts
pvc Primer and Glue
Cut your pieces as follows
2 x 20"
4 x 6"
2 x 9"
2 x 3"
1 x 4"
JUST TO BE CLEAR, IF YOU BUILD THESE AND YOU DROP YOUR BAG....I AM IN NO WAY LIABLE. THIS IS FOR INSTRUCTIONAL PURPOSES ONLY.
FOLLOW ME!
Facebook - / stevenleehousden
Facebook Group SIK Baggers - / 427595487637128
Instagram - sikbaggers...
Twitter - StevenHousden?lan...
Gear
Camera- Sony 4K AX53 - www.amazon.com/Sony-FDRAX53-V...
Wireless Mic - Samson Go Mic Mobile - Samson-Mobile-Professional-Lavalier-Wireless/dp/B0749WP3M3
Wired Mic - Maono - gp/product/B01M4J5WCM
Shotgun Mic - Comica - gp/product/B06XBX3X7K
Video Tripod - COMAN-KX3636-Professional-Aluminum-Camcorders/dp/B01NA8PIZX
Ultra Tripod - gp/product/B01419PIMK
Light Tripods Zomei Z818c- gp/product/B013YDWR46
Zomei Z818 - gp/product/B013UESDJC
Video Lights - Samtian LED Video Lighting - SAMTIAN-Camcorder-Barndoors-Batteries-Photography
#sikbaggers #advanblack
The video content is available for informational and educational purposes only. Steven Housden, SIK Baggers and/or Advanblack does not make any representation or warranties with respect to the accuracy, applicability, fitness or completeness of the video content. Steven Housden, SIK Baggers and/or Advanblack does not warrant the performance, effectiveness or applicability of any sites listed or linked to in any video content. The information contained in the multimedia content (“Video Content”) posted represents the views and opinions of the original creators of such Video Content and does not necessarily represent the views or opinions of Company. The mere appearance of Video Content on the Site does not constitute an endorsement by Company or its affiliates of such Video Content.
Steven Housden, Advanblack, SIK Baggers assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. Any injury, damage, or loss that may result from improper use of tools, equipment, or the information contained in this video is the sole responsibility of the user.

Пікірлер: 37

@delbridge11l 5 жыл бұрын

Just a heads up. With the box of beer and 5 gallon bucket to carry the fittings to the front of the store it brings the total up to $31.69.

@sikbaggers 5 жыл бұрын

Aahhahhhha you win best comment on my channel to date. Good stuff.

@delbridge11l 5 жыл бұрын

Steven Housden glad to hear I’m the best at something! Haha. These things bag holders are incredible. Thanks for the awesome video. I’m up by the Champaign danville area not to terribly far away.

@sikbaggers 5 жыл бұрын

@@delbridge11l Hell yeah man...just up the road a bit. We will have to meet up sometime...were always looking for new places to ride and we dont go north very much...mt vernon is about as far we usually go. Get up with me this summer, if it ever gets here haha

@lenjames 4 жыл бұрын

I usually have my Butler hold the bags as my garage attended washes my bike...my name is Biff. Great vid as always!!

@briannance9927 3 жыл бұрын

Great Idea and plans. Thank you. Gets my bags OFF THE FLOOR!

@michiganborn8303 5 ай бұрын

Wow! How the shop has changed so much in 6 years since this video uploaded.

@sikbaggers 5 ай бұрын

hhahhha yeah man..I started in this old garage with 2 light bulbs and a bunch of "garage stuff" everywhere. It really has came along way and spent a lot of my own money to get it there...I wish youtube paid better lol but its all benn worth it to provide better content for everyone.

@jamespreston81 4 жыл бұрын

Great DIY vid and idea. Not sure I'd ever need to remove my bags long enough to use this product. But love the vid like all your other vids.

@sikbaggers 4 жыл бұрын

They come in handy when working on anything in the back of the bike. Love them and use them often..actually built 2 sets now and use them when I have multiple bikes in there. Keeps me from kicking them all day lol thanks for checking it out!

@pgroadglide1581 6 жыл бұрын

Now thats a damn good idea the best DIY ideal yet for the baggers I always had my saddlebags on a short fold-up table with the towel on it but always stressing or worried the dog or somebody would walk by and they would fall right off, laying down on the backside they're still not stable and a Weeble wobble on the back side, that idea gave me a lot more ideals like a pedestal rack with coaster Wheels applying that tubular design to be able to hold two saddlebags back to back with a board Center to be able to hold tht tubular design.

@sikbaggers 6 жыл бұрын

Yes sir there are a few variations of this design that could be done. Im glad the video helped you and thank you for checking it out. Post up a video and share it over here if you get one made. Would love to see the design. Cheers!

@stanwerner7484 4 жыл бұрын

Steve, We spoke on Monday and I place my order for the 14 up saddle bags. Thank you for you help and knowledge. On another note regarding this video I have to say I hope the company that you work for appreciates what you are doing. Providing a tutorial on a saddle bag storage unit/ build is going way be on what most in your position would do. Thanks again for all of your. Respectfully, Stan

@sikbaggers 4 жыл бұрын

Hey Stan....thank you sir. much appreciated. I did one for the tour pack rack as well...saved me tons of money on a wall mounted tour pack rack. Thanks for checking it out man.

@richardgonzalez6550 6 жыл бұрын

Bad ass!!! Tks!

@sikbaggers 6 жыл бұрын

Thank you Richard!!

@rosekransconst.2495 6 жыл бұрын

Sweet I was just looking for the floor stand this looks like a better idea Menards here I come!

@sikbaggers 6 жыл бұрын

I love it man! I put my bags on them all the time....keeps them off the floor and keeps me from kicking them lol

@les6556 4 жыл бұрын

Thanks!

@sikbaggers 4 жыл бұрын

Youre welcome. Be safe.

@alanwhiteside410 5 жыл бұрын

Thanks Steven I had been thinking of building something like this but not for the wall as I can’t seem to find my walls! Lol Maybe just to sit on a floor model would be good for me. Thanks again! Al Whiteside from Columbia, Illinois. 😎👍🍺

@sikbaggers 5 жыл бұрын

Hey Al! Good to see a fellow Illinoisan on here! Im starting to have the same problem ...cant find my walls! lol But these really do come in handy...I have seen the floor models all over the web but I dont have any measurements for them. I know it needs a 90 at the top and something in the middle to pull the two sides together so it doesnt do the splits when you add weight to it.

@jsimanella Жыл бұрын

Center pieces are about a half inch short. You may have had different fittings.

@sikbaggers Жыл бұрын

maybe...a lot of people have made these and no one has said anything about it...its a pretty old video.

@lloydedmonds8775 6 жыл бұрын

Good Stuff doesnt have to be expensive👍🏼 Thx fer sharin'

@sikbaggers 6 жыл бұрын

Amen to that....money in the pocket means more parts lol. Thanks for checking it out!!

@lloydedmonds8775 6 жыл бұрын

lol We think alike, Steven

@gajewski13 Жыл бұрын

I built one to try it and worked ok. But I am storing cvo saddlebags with an amp and speaker inside. The weight scared me a little. So I stole your idea and used black pipe to build it. It worked great and now I can keep those bags off the floor. Thanks.

@sikbaggers Жыл бұрын

Glad the video helped!!

@travisgray3331 5 жыл бұрын

In your video what air cleaner is that on the street glide?

@sikbaggers 5 жыл бұрын

Hey Travis..I have the Arlen Ness 10 Gauge Inverted found here www.amazon.com/Arlen-Ness-18-940-Inverted-Cleaner/dp/B00OIQNT96 and also the matching grips. These come in several flavors too so check them out....just different patterns on the outside cover but same filter system...check the different styles here www.amazon.com/s?k=arlen+ness+inverted&i=automotive&ref=nb_sb_noss_2

@travisgray3331 5 жыл бұрын

Steven Housden thank you for the information and the link. Enjoy your videos...

@toddteubner7349 2 жыл бұрын

What holds the bag to the bracket?

@sikbaggers 2 жыл бұрын

The angle...if youw ant to add something just add some small soft bungees...I had those extra bags hanging on there for awhile before I took al of this down and never lost one with out any straps..just make the bottom post longer so it kicks it an an angle.

@nevillegreg1 6 жыл бұрын

I suppose reach to their own, I would have simply built a shelf on the wall and put the saddle bag on the shelf.

@sikbaggers 6 жыл бұрын

i thought about that and thought it would be to easy to knock off the wall. This takes up less space when not in use and also the bottom piece hold the bag just like the bag rail would on the bike...with the lean it would be very hard to knock these off.

@nevillegreg1 6 жыл бұрын

I put my leather saddlebags on selves installed between the brick piers for the single brick wall of the garage. Perfect! They have never fallen.