How To Test Lawn Mower Compression With NO Gauge
Рет қаралды 164,816
Күн бұрынAre you 100% sure you have a compression problem? Before you start any repair on your lawnmower, check the spark, fuel supply and compression. These are the 3 preliminary tests most small engine mechanics do before they tear your engine apart. In this video, I am going to show you the quickest and simplest way to test your compression without a compression gauge.
For lawnmowers, if you have a compression problem, it’s almost always a valve issue!
👍Please click the like button and tell me what you think of this video in the comments section below. 👇👇👇
✅Click here for a compression tester ➜ amzn.to/2JPWGoa
✅Click here for a clamp ➜ amzn.to/2K4P69t
For more videos like this, check out:
👉Straighten A Bent Lawn Mower Crankshaft With A Pipe ➜ • Straighten A Bent Lawn...
👉Fastest Way To Tell If The Crankshaft Is Bent On A Mower ➜ • Fastest Way To Tell If...
👉Here's Why Your Lawn Mower Is Leaking Gas - Honda Style ➜ • Here's Why Your Lawn M...
👉How To Adjust the RPM Speed on a Lawn Mower ➜ • How To Adjust the RPM ...
🔧WELCOME to the Steve’s Small Engine Saloon KZfaq channel! Here you will find a vast library of easy do it yourself repair videos for all types of small engine equipment like chainsaws, weed eaters, hedge trimmers, brush cutters, leaf blowers, lawn mowers, pressure washers, generators, riding lawn mowers and so much more. I have been a small engine mechanic for over 30 years and my videos are absolutely loaded with tips and tricks that I have learned and want to pass on to YOU. 🙂
👉SUBSCRIBE for more free repair videos ➜ / @stevessmallenginesaloon and don’t miss another video by turning on the bell notification 🔔
👉JOIN this channel to get access to perks 🤩 here ➜ / @stevessmallenginesaloon
⭐Members-only have cool access to badges, emojis and exclusive content as well as a way to help support the channel.⭐
You can connect with Steve here too:
✅Visit Steve’s WEBSITE ➜ www.stevessmallenginesaloon.com/
✅Visit Steve’s PARTS & TOOL STORE ➜ www.amazon.com/shop/stevessma...
✅Follow Steve on FACEBOOK ➜ / stevessmallenginesaloon
✅Follow Steve on INSTAGRAM ➜ / stevessmallenginesaloon
✅Follow Steve on TWITTER ➜ / stevesaloon
❤️Thank you for watching!! If I saved you some money with this video, please consider supporting my efforts with a donation ➜ www.paypal.com/cgi-bin/webscr...
💡If you have an idea or suggestion for a video, please fill out this form ➜ www.stevessmallenginesaloon.c...
If you choose to try one of the suggestions made in this video, you do so at your own risk. No information contained in this video shall create any express or implied warranty or guarantee of any kind. Any injury, damage or loss that may result from the improper use of tools, equipment or information contained in this video is the sole responsibility of the viewer and not Steve’s Small Engine Saloon Inc. Please ensure that you take all proper recommended safety measures before attempting any project. Steve’s Small Engine Saloon Inc. assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. As an Amazon Associate I earn from qualifying purchases.
#stevessmallenginesaloon #smallenginerepair #smallengine #lawnmower #lawnmowerrepair #mower #mowers #mowerrepair #honda #craftsman #toro #husqvarna #troybilt
@StevesSmallEngineSaloon 4 жыл бұрын
✅Click here for a compression tester ➜ amzn.to/2JPWGoa ✅Click here for a clamp ➜ amzn.to/2K4P69t For more videos like this, check out: 👉Straighten A Bent Lawn Mower Crankshaft With A Pipe ➜ kzfaq.info/get/bejne/rZiCopx40qvdf3k.html 👉Fastest Way To Tell If The Crankshaft Is Bent On A Mower ➜ kzfaq.info/get/bejne/adugaJp1rc-noac.html 👉Here's Why Your Lawn Mower Is Leaking Gas - Honda Style ➜ kzfaq.info/get/bejne/qtZmaqSrvLTGeWg.html 👉How To Adjust the RPM Speed on a Lawn Mower ➜ kzfaq.info/get/bejne/bb-idJaCqq-qnnk.html You can connect with Steve here too: ✅Visit Steve’s WEBSITE ➜ www.stevessmallenginesaloon.com/ ✅Visit Steve’s PARTS & TOOL STORE ➜ www.amazon.com/shop/stevessmallenginesaloon ✅Follow Steve on FACEBOOK ➜ facebook.com/stevessmallenginesaloon ✅Follow Steve on INSTAGRAM ➜ instagram.com/stevessmallenginesaloon/ ✅Follow Steve on TWITTER ➜ twitter.com/SteveSaloon
@mosfet500 4 жыл бұрын
Steve you can't really check compression with a gauge on these small engines, you have the best solution. Here's the problem. The volume of the cylinder, especially in small stuff like trimmers and chain saws or 4 cycle GX25 and 35 Honda's, is that the ratio of air in the cylinder to the ratio in the line to the gauge and the gauge itself is way too high, if you get 50 or 60 lbs it's a lot, so don't waste time with gauges. The line and gauge are lowering the reading too much. If you've checked everything else, carbs, ignition, etc and you pull your engine apart just make sure you have good valves and rings and the cylinder walls are good and in specs. Thanks for the video.
@canufi6my 3 жыл бұрын
Steve, Steve, Steve! I use a fisherman's scale to check compression. I grab the rope start with the scale hook and give it a tug, 8 to 10 pounds of pull to get it to turn over is a good start! Let me know what you get get on the Honda when you unstick the intake valve.
@roygerson694 3 жыл бұрын
Lawn mower has no compression still
@XwpisONOMA 3 жыл бұрын
I love your videos and the no bs approach and the beer is always a plus. Having said that an internal combustion engine needs fuel, oxygen and spark to run. That is technically the correct statement. The compression is of course necessary but as an internal aspect of how the engine works there is not much end users with limited mechanical experience can do about it. No compression means a damaged cylinder, or piston compression rings or valve(s) not closing fully or all the above. And that means major overhaul of the engine which is beyond the expertise of most home DIYers. But fuel, oxygen and spark are things that can be readily verified and fixed without the need of special tools and knowledge. Thank you for your videos, very helpful !!!
@owenrobbins42 Жыл бұрын
When my spark plug is in, I get a nasty grinding noise while I'm spinning the blade, but its quiet when the plugs out.
@healthdios 3 жыл бұрын
The dislikes on this video are from folks running out of beer 🍺
@samuelcorbett1727 5 жыл бұрын
Steve's way of measuring time with amounts of beer should become a world-wide unit of time measuring.
@StevesSmallEngineSaloon 5 жыл бұрын
Right on Sam....
@ThePerfectSeason1972 4 жыл бұрын
Actually back in the day when you could drink beer in car, a drive was measured by the amount of beers it took to get there. 2-3 with in reason.
@Witchy-87 Ай бұрын
It reminds me of my home state of Wisconsin. We measure about everything in beer time vs "normal" time. 😁
@donaldhills5475 3 жыл бұрын
Tks steve! 20yrs maintaining my push mower- Eager 1- Compression Gone! You verified my trouble shooting! Keep up your GOOD WORK- DON!
@StevesSmallEngineSaloon 3 жыл бұрын
You're Welcome...and Thank You...
@daddyslittlejunkies 10 ай бұрын
I do not have the gauge so I use this method before and after doing some work in my B&S engine. This thing was spinning like a fan before. After head gasket change, valve lap and setting the valve lash, it bounces back like the daily runner in this video. Nice! I did lean the mower over some on the 'wrong' side since mine was on the ground. I have no bench or table to put it on to work. It would not start AT ALL. I let it sit for a day. I shot some Seafoam in the plug hole and after a few pulls she fired up and choked out a lot of smoke from the oil. After a minute, the smoke cleared and it starts on the first or second pull when cold and first after running a minute or so. My 1998 Craftsman it alive and kicking still.
@iron60bitch62 5 жыл бұрын
This channel is fabulous I’m so happy I found it
@StevesSmallEngineSaloon 5 жыл бұрын
Thank You...
@aworkingmanspride2494 3 жыл бұрын
Me too
@mharrison1325 Ай бұрын
Great tips as always, Steve. Hands down best small engine saloon on KZfaq.
@StevesSmallEngineSaloon Ай бұрын
Thank You...
@Danielson1818 4 жыл бұрын
I'm never going to be the guy that can completely rebuild an engine, but your videos have taught me all the things I have to look for. Bad gas, dirty air filter, spark plug, no compression, too much oil making smoke, or pinching off/removing the gas line to check/clean the carburetor... So like I said, I'm not the guy that can rebuild all this stuff, but now I'll never be the sucker that throws away a mower before it's been worked on. I've become "informed" in less than a week. Thanks.
@StevesSmallEngineSaloon 4 жыл бұрын
Right on Danny! You're Welcome...
@jciamretired9767 2 жыл бұрын
Glad I came across this video. Been trying to figure out why my mower wont't start. I have tested and tried many things on the mower and just couldn't figure out what was wrong. Last thing is to check the compression by using your trick and wahlah, my mower has no compression at all. Worked on the OHV valves and now my mower is running fine. Thank you
@StevesSmallEngineSaloon 2 жыл бұрын
Great to hear!
@kevinamack6 4 жыл бұрын
Steve-I’ve been a teacher for 19 years. If I was evaluating you I would give you an A+. Your descriptions are so thorough and clear. I learned a ton from your channel. Thanks and keep up the good work.
@StevesSmallEngineSaloon 4 жыл бұрын
Thank You...and You're Welcome...
@saleemkader2126 5 жыл бұрын
Steve i had two Honda mowers which i could not repair but after watching your videos i fixed them both. Thank you. very well explained. The best video on mowers.
@StevesSmallEngineSaloon 5 жыл бұрын
Thank You...and You're Welcome...
@martinpreece7773 4 жыл бұрын
Thanks for the info Steve -cant wait for the sequel. You looked like a vintage aviator starting the plane engine!
@mlortiz06 2 жыл бұрын
Thanks for this video just diagnosed a Toro with a kholer engine w/ no compression, and the blade spun like a boomerang. lol Thanks bud.
@richardkarl6727 3 жыл бұрын
Thanks Steve. Just started fixing mowers for a Hobby. I should have watched this Video first before jumping into the repair. I just spent 4 hours trying to fix a mower with no compression.
@StevesSmallEngineSaloon 3 жыл бұрын
Glad to help
@grominwithrob1339 5 жыл бұрын
Thanks for the tip! At work I always pull the plug and screw a pressure gauge and roll it over. Your tip is great if your say out and about looking to buy a used ditch mower. One of my customers makes a living reselling mower finds. She finds cheap or free mowers and brings them to me to fix so she can flip them. She will love this tip.
@greybeard804 5 жыл бұрын
You and Mustie1 are the best! My two favorite channels.
@StevesSmallEngineSaloon 5 жыл бұрын
Thank You...
@brian436 4 жыл бұрын
And Taryl and Donny Boy.
@rogeriburg976 4 жыл бұрын
Diddo!
@knottreel 4 жыл бұрын
Two of the best people on KZfaq.
@peterorro883 3 жыл бұрын
You have impeccable taste...like me!
@Kay-dx8vm 3 жыл бұрын
so tempting to go check my mower right now, at 11:58PM lol
@StevesSmallEngineSaloon 3 жыл бұрын
Right on
@JerryGeorgeMDiv 3 жыл бұрын
I like watching your videos. You do a great job illustrating how to do things. I learn something new each time.
@StevesSmallEngineSaloon 3 жыл бұрын
Awesome, thank you!
@larryg3150 4 жыл бұрын
Larry, NC Steve, love your videos. Please do a video on what to look for when buying a used push mower. This compression video was very helpful.
@spitzerone 5 жыл бұрын
Steve's channel is one of the best channels on KZfaq. If you do commercial mowers, how about a video showing how to service the drives? Thanks for what you do!
@neilmccolman9107 5 жыл бұрын
Awesome video Steve ! You can also test for spark at the same time , just hold on to the sparkplug wire with your other hand ! ! You will need the rest of the beer to recover from that one . Lol
@StevesSmallEngineSaloon 5 жыл бұрын
LOL! Done that more than 2 times....
@ballsthatclank 3 жыл бұрын
Thanks for the tip...I'm diagnosing my old 2004 snapper ninja and I thought I might have worn rings. I tried this and the blade bounced back very fast just like this mower. It started when I tipped my mower upside down to change the oil (6.5 HP quantum xrm Briggs & Stratton) and now it won't stop smoking after never smoking before. The dipstick went from 'full' to 'add' in just two mows it's burning so much oil.
@wendychapin1905 4 жыл бұрын
Steve puts everything in laymans terms. I've always worked on my own equipment and sometimes never to figure out the problem. Steve makes it easy to troubleshoot the problems and then shows exactly how to fix the problems in the most efficient way possible.
@StevesSmallEngineSaloon 4 жыл бұрын
Thank You...
@kennycoye3907 5 жыл бұрын
Always wondered! Never asked anyone, or watched videos! Until yours! Thanks Steve!
@StevesSmallEngineSaloon 5 жыл бұрын
You're Welcome...
@jlynch916 8 ай бұрын
As a non drinker I still crack up when you compare the time a job takes to how many sips of beer haha love this channel. I’ve learned a lot…thanks Steve
@StevesSmallEngineSaloon 8 ай бұрын
Haha, even as a non-drinker, you can still appreciate the humor! I'm glad you're enjoying the channel and finding it entertaining. Cheers to that!
@richardroe4055 5 жыл бұрын
Thought you’d knocked over your beer with the mower! Awful moment haha! Easy test, thanks for showing us that!
@StevesSmallEngineSaloon 5 жыл бұрын
You're Welcome...
@knottreel 4 жыл бұрын
Now that's an easy and quick test. Thanks for making it so clear and entertaining.
@StevesSmallEngineSaloon 4 жыл бұрын
You're Welcome...
@urbanlumberjack 3 жыл бұрын
I've learned so much from this channel! I love two stroke engines. They are so simple and reliable.
@Royal19122 2 жыл бұрын
Love the videos. U have helped me multiple times with different small engines. Thank you. Let’s hit the like button and show our support and appreciation.
@StevesSmallEngineSaloon 2 жыл бұрын
Thank you very much!
@je1279 4 жыл бұрын
Air is also a key element Steve but I've also neglected to mention that more than once myself ; ) Keep up the great work and congrats on the 146k+ subscribers.
@StevesSmallEngineSaloon 4 жыл бұрын
Thank You...
@ronlitz9055 3 жыл бұрын
Steve is a gem. I enjoy watching his vids even if all my tools are running great. Great fun and very informative.
@StevesSmallEngineSaloon 3 жыл бұрын
Great to hear!
@angipp01 2 жыл бұрын
Here from Waterdown Ont. Canada. My favorite channel.
@StevesSmallEngineSaloon 2 жыл бұрын
Thank You...
@bumblbesss 5 жыл бұрын
i needed this video so badly, i usually try the rope pull. but this gives me another way to test. Thx Steve i need to quit being cheap and buy a tester haha
@StevesSmallEngineSaloon 5 жыл бұрын
You're Welcome...
@RobertJohnson-ns3gz 4 жыл бұрын
Thanks to these videos, I have brought 3 mowers and a tiller back to working order. Great stuff on a level I can understand.
@StevesSmallEngineSaloon 4 жыл бұрын
Glad to help
@mercenaria_merceneria 4 жыл бұрын
Best small engine repair channel on youtube. Informative and entertaining. Thanks!
@StevesSmallEngineSaloon 4 жыл бұрын
Wow, thanks!
@CBinTN2 5 ай бұрын
Been struggling getting this old lawn mower up and running. It was inactive for a long time. I have done the following: Replace gas tank and line, cleaned old carb and then replaced carb twice with new ones from Amazon, replaced air filter/prime bulb mount, gasket and filter, pull cord, control cable, spark plug, reset igniter gap, checked flywheel brake alignment. Pulled carb fuel bowl nut to make sure fuel is getting into bowl. It primes fine as far as I can tell, meaning if I look into the carb in can see gas coming into the carb. It only turns over for a couple seconds with starter fluid. Turned it on its side and I get no kick back when turning the blade. Put the compression tester on it and only got 60 psi and it's bleeding off.
@chrisrobinson2112 5 жыл бұрын
Once again you do not disappoint!! Looking forward to the next video! Thank you Steve!
@StevesSmallEngineSaloon 5 жыл бұрын
You're Welcome...
@trapperwayne6785 5 жыл бұрын
Never too old to learn. Great job Steve !! Thanks 🙏
@StevesSmallEngineSaloon 5 жыл бұрын
You're Welcome...
@jeffhaney2999 2 жыл бұрын
I happened to watch the intake valve video before watching this particular video. I already knew the biggest possible answer on why there was no compression on the second mower. Your videos are quite educational and to the point. Subscribed!
@StevesSmallEngineSaloon 2 жыл бұрын
Thank You...
@71dman350 5 жыл бұрын
Good thing I watched this before I bought another used mower to fix up. Now I know what to look for.
@StevesSmallEngineSaloon 5 жыл бұрын
Right on ....
@sweetlou5902 5 жыл бұрын
Love your videos Steve! Very straight forward and no BS.
@StevesSmallEngineSaloon 5 жыл бұрын
Thank You...
@wesleyrhoads3307 5 жыл бұрын
Nice quick easy way to test compression. Thanks Steve!
@StevesSmallEngineSaloon 5 жыл бұрын
You're Welcome...
@wannaberocker6501 10 ай бұрын
Thanks for making these videos, you hade me fix my stihl that wasnt revving in 2 minutes.
@StevesSmallEngineSaloon 10 ай бұрын
Great to hear!
@wildefox1478 5 жыл бұрын
Quick and easy tip on quickly checking the compression on a lawn mower, thanks for sharing Steve!
@StevesSmallEngineSaloon 5 жыл бұрын
You're Welcome...
@russl4294 5 жыл бұрын
Great tip, keep them coming , it helps a lot , I have been a DIY all my life and still learning all the time. Thanks , your the best !
@StevesSmallEngineSaloon 5 жыл бұрын
Thank You...and You're Welcome...
@user-hi2jt3tg3k 11 ай бұрын
The dude abides 👍🏽
@1811bruce 5 жыл бұрын
Thank You Steve. Some great tips! I am looking forward to the teardown on the engine with no compression! Have a great day.
@StevesSmallEngineSaloon 5 жыл бұрын
You're Welcome...
@PaulThomas-qo9vy 5 жыл бұрын
Great job Steve, thank you for telling us Why, & not just how to fix something! The Why is the logic behind a mechanical device & is essential for learning & proper diagnosis of a machine. You confirmed my question & suspicion on the "Riding mower dirty little secret" video on the mower deck blade sealed bearings, the last time I replaced them. There were no grease fittings on those housings so I left the seals on. The bearings only lasted a year! I had just seen your "dirty secret" video in June 2019 when the bearings started growling again. This time I bought zerk grease fittings, tapped & installed them in the 2 housings & modified the seals as you described on the video. The cheap grease was so thin that compressed air easily blew it out! I repacked them with Mobile 1 synthetic grease, filled the housings with the same grease, thru the grease fitting & installed the top bearing. Now they will last longer. Thanks for sharing brother!
@davidsonnier2842 3 жыл бұрын
Steve - your channel is a lifesaver for novices like me. You save me so much money and educate me at the same time. You are the only channel I donate money to. Real quick - what should be the average compression if we do hook up gauges. (I bought the briggs and stratton motor book - and they only tell you to buy their leak kit) So now I need to know what the norm is.
@jimhoward7503 3 жыл бұрын
I appreciate your videos! I've watched a few by now and enjoy your easy no-nonsense approach. You explain and demonstrate things in a way as to make it easy to understand. Keep up the good work!
@StevesSmallEngineSaloon 3 жыл бұрын
Wow, thanks!
@Colt3854 5 жыл бұрын
You are the small motor man that rules.Great info as usual Steve.
@StevesSmallEngineSaloon 5 жыл бұрын
Thank You...
@shanebingham9916 5 жыл бұрын
Awesome video. Just taught this middle aged dog a new trick. Thanks and keep up the good work.
@StevesSmallEngineSaloon 5 жыл бұрын
Thank You...and You're Welcome...
@barrybebenek8691 4 жыл бұрын
Nice, simple, cost-nothing, way to check for compression. Awesome! 👍🏼🇨🇦
@StevesSmallEngineSaloon 4 жыл бұрын
Thank You...
@sidneycandelario5768 4 жыл бұрын
I learn something every time I watch this videos. Thanks.
@StevesSmallEngineSaloon 4 жыл бұрын
Glad to hear it!
@joedominick7517 5 жыл бұрын
Steve I look forward to your videos,I always learn something new.
@StevesSmallEngineSaloon 5 жыл бұрын
Thank You...
@adamasz54 4 жыл бұрын
ME TOO, ME TOO - just regarding small engines Steve is always PRICELESS ;- )
@williamstubbs9737 4 жыл бұрын
guess i need to watch the next one because that is where i'm at. As always, thanks for taking the time to share your knowledge and expertise.
@scottpeplinski4041 Жыл бұрын
he knows how to help you. best u tube so far------ low comp
@bradkopczyk9049 4 жыл бұрын
Steve. You are the man. Always learning something new from you. Thanks for your videos. I watch em alot. Cheers brother!
@StevesSmallEngineSaloon 4 жыл бұрын
Thank You...and You're Welcome...
@robertlangley258 5 жыл бұрын
EXCELLENT EXCELLENT EXCELLENT!! 👍👍👍 Your still “The Best” Steve, thank you so much for sharing your vast knowledge of small engine repair. You should put all this information in a book and sell it. Thank you Sir.
@StevesSmallEngineSaloon 5 жыл бұрын
Thank You...and You're Welcome...
@thinkingimpaired5663 5 жыл бұрын
Steve in honor of you and your great videos, i cracked open a Heineken and had several sips. I'm looking forward to your next video on the lawn mower teardown. Great video on compression.
@StevesSmallEngineSaloon 5 жыл бұрын
Thank You...
@doctormoreau9812 5 жыл бұрын
Quality content everytime, steve your doing a great job. Excited about the next video 👍👍👍👍👍
@StevesSmallEngineSaloon 5 жыл бұрын
Thank You...
@andrewwoodward6560 5 жыл бұрын
Nice demonstration, Steve ! Thanks !
@StevesSmallEngineSaloon 5 жыл бұрын
You're Welcome...
@bobw.991 4 жыл бұрын
Thanks for all the great info. I'm a beginner but I like it! It is a great feeling to fix something yourself.
@StevesSmallEngineSaloon 4 жыл бұрын
You're Welcome...
@gabrielbennett5162 2 жыл бұрын
"Houston, we have a problem." I need your advice. Just tried this test on my mower and while it isn't as bad off as the second mower in this video, it isn't nearly as good as your orange mower. In fact, I think it's exhibiting slightly better than "squishy stop" you described and does have a little bit of bounce-back. I already cleaned the valve stems and adjusted the valve lash to factory specs; they're cycling properly, so that isn't the problem. I also installed a brand new head gasket, so that isn't it. It ran for about 5 minutes yesterday and then started surging, getting slower and slower, then finally dying and I haven't been able to get it going again. After the brief run, I did open up the breather chamber under the blower housing to inspect the reed, which exhibited a bit of wear and will be replaced as soon as the new one arrives by mail. I have not re-sealed the chamber yet, but am not sure how much this would affect starting and compression. I recently installed new piston rings and suspect this is where the problem lies; when I got the new rings from Briggs & Stratton, one compression ring was completely missing the paint stripes it was supposed to have, according to the instructions, and the other had only a single pink stripe that was further over than the illustration indicated it should have been. I tried looking for the bevel, but couldn't see any and did not notice any marks or pips on the rings. So basically, I had to guess at the order the compression rings were supposed to be installed on the piston and I think I may have guessed wrong. Also, the top groove had tight spot in it, but that appears to be by design. The oil control rings on the bottom went on easily. I have a feeling I'm going to have to tear it down, pull the piston and redo the compression rings. Any advice you can give would be greatly appreciated.
@thomascolopy5935 10 ай бұрын
Thanks Steve. enjoy
@josedejesus6185 4 жыл бұрын
Thank you, thank you! This is very good tip! It saves a a lot of headaches and precious time!
@StevesSmallEngineSaloon 4 жыл бұрын
You're Welcome...
@semco72057 5 жыл бұрын
I like the way you showed us how to check the mower for compression. I have a riding mower which I have to check out since it have been sitting since last year and I want to get it running and put it into service.
@semco72057 5 жыл бұрын
@Frank Maggard Thanks for that information since my mowers are run off of belts.
@sfor 5 жыл бұрын
Thank you, you are such a positive personality.
@StevesSmallEngineSaloon 5 жыл бұрын
You're Welcome...
@mmuller3233 5 жыл бұрын
A top channel with all the practical tips that work for the average folk like me.
@StevesSmallEngineSaloon 4 жыл бұрын
Thank You...
@sebajolly 4 жыл бұрын
Can't wait for the following video!
@mercoid 5 жыл бұрын
I love this channel! Thanks for saving us money and making us smile.
@StevesSmallEngineSaloon 5 жыл бұрын
Thank You...and You're Welcome...
@907to760 3 жыл бұрын
Thanks for posting this video Steve!
@StevesSmallEngineSaloon 3 жыл бұрын
Our pleasure!
@johnleal500 4 жыл бұрын
Excellent presentation! Great info. My " GO TO " whenever I need a great source of info. Easy to understand , concise and to the point. Where do I send you some beer.
@RafaelHernandez-hx4rv 2 жыл бұрын
Thanks for your teaching
@StevesSmallEngineSaloon 2 жыл бұрын
You're Welcome...
@deanduprey597 2 жыл бұрын
just found this channel and its awesome. cant stop watching
@StevesSmallEngineSaloon 2 жыл бұрын
Welcome aboard!
@shanestoneham3166 3 жыл бұрын
Hello Steve. Glad you like drinking our Fosters beer from Australia. Thanks for sharing your tips Steve. Cheers Shane
@StevesSmallEngineSaloon 3 жыл бұрын
You're Welcome...
@joshuaneal4125 5 жыл бұрын
Short, sweet, and to the point
@StevesSmallEngineSaloon 5 жыл бұрын
Right on Josh....
@kurtschleue9440 5 жыл бұрын
Thanks brother I was in the process of trying to find a compression tester in all my junk when I saw this video. You just saved me a bunch of time I flipped her over and she has good comprehension so now I can just go on and find out what the problem is. Once again thank you bunches. I will open a beer in your honor 😜
@StevesSmallEngineSaloon 5 жыл бұрын
You're Welcome...
@pittschapelfarm2844 5 жыл бұрын
More good info. Thanks Steve.
@StevesSmallEngineSaloon 5 жыл бұрын
You're Welcome...
@dannyanderson972 2 жыл бұрын
Hey Steve thanks for the videos you put out. I myself have messed with small engines most of my life. But I find Time After Time watching your videos simpler Solutions the problems that I have run across okay, then what I would normally go through. So basically thank you for keeping it simple for stupid
@StevesSmallEngineSaloon 2 жыл бұрын
You're Welcome...
@shikpolam8968 3 жыл бұрын
Love your video, it is both informative and educational, fun to watch too. A big thank you.
@StevesSmallEngineSaloon 3 жыл бұрын
Thank You...and You're Welcome...
@kbjerke 4 жыл бұрын
Always a beerworthy video, Steve! Thanks!
@StevesSmallEngineSaloon 4 жыл бұрын
You're Welcome...
@leonardleveque3745 4 жыл бұрын
Excellent information and perfect presentation. Enough said.
@StevesSmallEngineSaloon 4 жыл бұрын
Thank you kindly!
@harleyjim1st 5 жыл бұрын
I always learn from your vids Steve. Thanks.
@StevesSmallEngineSaloon 5 жыл бұрын
You're Welcome...
@1keykneedeep 4 жыл бұрын
Awesome video Steve. Your the best teacher of small engine repair I've seen thus far.
@StevesSmallEngineSaloon 4 жыл бұрын
Thank You...
@1keykneedeep 4 жыл бұрын
I was given the exact same mower with nearly identical issue - 1 day after viewing your video. Lol True story - no joke. I know what to do next 👍👍
@1980sLegoFan 5 жыл бұрын
Excellent video. Entire channel is fantastic!
@StevesSmallEngineSaloon 5 жыл бұрын
Thank You...
@robertchaffee5662 5 жыл бұрын
That was a nice first check though! I first do an ignition test after pulling the boot,, then pull the spark plug and install a compression guage before the going any further. Cheers Steveo! Luv ya man!
@pammaynard9997 Жыл бұрын
I love a man who knows his engines
@StevesSmallEngineSaloon Жыл бұрын
Right on
@ihus9950 5 жыл бұрын
I'm ready for the next video, Thanks Steve👍
@StevesSmallEngineSaloon 5 жыл бұрын
You're Welcome...
@claudiojuarez1444 4 жыл бұрын
Thank you steve you been so helpful for me i always watch you videos and leaning something!!
@StevesSmallEngineSaloon 4 жыл бұрын
You are so welcome
@landcare-outdoorfun176 3 жыл бұрын
Thank you for sharing your videos. Very helpful.
@StevesSmallEngineSaloon 3 жыл бұрын
You are so welcome!
@trinichadee1719 3 жыл бұрын
Steve, I am from Trinidad west indies, all your video is so helpful I learned a lot from all your video to repair all my small engines, may God bless you with long life and good health thank you. 👍🙏🙏
@StevesSmallEngineSaloon 3 жыл бұрын
Thank You...and You're Welcome...
@bulletproofpepper2 3 жыл бұрын
thanks for sharing!!!
@lylelindstrom8788 4 жыл бұрын
Steve is the best, learned a lot from him.
@StevesSmallEngineSaloon 4 жыл бұрын
Thank You...
@mongolioose 4 жыл бұрын
Steve you're awesome. Thanks for sharing.
@StevesSmallEngineSaloon 4 жыл бұрын
Thank You...and You're Welcome...
@dnngskn62 5 жыл бұрын
Another great tip Steve. Keep them coming.
@StevesSmallEngineSaloon 5 жыл бұрын
Thank You...
@CSSIandAssociate 5 жыл бұрын
Steve I really enjoy your vids that was a fantastic tip!
@StevesSmallEngineSaloon 5 жыл бұрын
Thank You...
@howardkoster4026 5 жыл бұрын
Steve! Great tip!!!! No need for compression tester as you say!!!!!!! Thanks for the tip!!!! Be well, be safe!!!!
@StevesSmallEngineSaloon 5 жыл бұрын
Thank You...and You're Welcome...
@JasonBeeneistheLordGod 3 жыл бұрын
Looking forward to the next video👍👍
@StevesSmallEngineSaloon 3 жыл бұрын
Right on
@geogeduggan6579 Жыл бұрын
Thanks for all the good information
@StevesSmallEngineSaloon Жыл бұрын
Our pleasure!
Take a Bath Productions
Рет қаралды 54 М.
Gufee.medalin
Рет қаралды 5 МЛН
Steve's Small Engine Saloon
Рет қаралды 123 М.
Steve's Small Engine Saloon
Рет қаралды 1,5 МЛН
No fire? No Spark? CHECK THIS FIRST How to make sure your ignition module is BAD on ANY small engine
Chickanic
Рет қаралды 168 М.
Mainely Small Engine DIY
Рет қаралды 27 М.
Chickanic
Рет қаралды 79 М.
Biya Channel
Рет қаралды 7 МЛН
Inwhite Medical - Стоматология Москва
Рет қаралды 6 МЛН