Sticker Material for Cricut: Which is Best? Comparing 14 Different Types

Рет қаралды 82,827

Күн бұрын

Which sticker material should you use for your Cricut? Which is best? What types work and which do not? If you are looking for regular sticker paper, clear sticker paper, or even waterproof sticker paper, I have options that will work for your sticker making! Watch this video to see which material is best for your crafts and store.
Materials Used (affiliate links):
Clear Sticker Paper:
Neato Labels amzn.to/3bRRG03
Cricut Brand www.thecountrychiccottage.net...
Printable Transparent Sticker Paper (Amazon brand) amzn.to/2MzMDJc
Matte Sticker Paper:
Silhouette
Cricut Printable Vinyl www.thecountrychiccottage.net...
Online Labels Full Sized Label Sheet amzn.to/3pZGwLW
Glossy Sticker Paper:
Royal Elements amzn.to/3q9U9bj
Aiva amzn.to/3uFPa5P
Kraft Paper:
Craft Tiff amzn.to/3sv2cRQ
Online Labels amzn.to/2NQ7oRx
Printable Vinyl with Laminate
Orajet Printable Vinyl www.directvinylsupply.com/pro...
Oraguard Laminate www.directvinylsupply.com/pro...
Starcraft Printable Vinyl www.directvinylsupply.com/pro...
Starcraft UV Laminate www.directvinylsupply.com/pro...
Sticker Paper that DID NOT work with my HP Printer:
Cricut Sticker Paper
Neato Labels Super Glossy amzn.to/37UruAU
Printable Translucent Sticker Paper from Amazon amzn.to/3e3ocPT
Free printable sticker sheet: www.thecountrychiccottage.net...
Printer I recommend is here amzn.to/34zOzYN
Other videos you may enjoy:
Test on laminated sticker paper for car decals: • The Best Material for ...
Print then cut: • Print then Cut Feature...
How to make stickers: • How to Make Stickers w...
#cricut #cricutstickers #stickermaking
0:00 Introduction
0:37 Brands Used
3:53 Printing stickers
6:32 Cutting on a Cricut
7:35 Cutting matte sticker paper
8:54 Cutting clear sticker paper
11:24 Cutting kraft paper stickers
12:10 Cutting glossy sticker paper
13:58 Laminated sticker sheets
20:04 Final recommendations
15:55 Colored stickers on the Maker
16:07 Water resistant test

Пікірлер: 264

@YolundaJ 3 жыл бұрын

Hi Angie, Thank you for all you do for us. Your videos are always so clear in explanation and your demonstrations are always awesome.

@amberrodriguez7313 2 жыл бұрын

This is by far the best video for recommending materials for stickers. You had everything I was hoping for and delivered it all so well and efficiently. Thank you!

@joyscranfield5527 3 жыл бұрын

Thank you Angie Holden! Super glad that you take time & effort to do all these comparisons! Truly appreciate it👏🤝

@AngieHolden 3 жыл бұрын

Any time!

@orlandoarciaga800 3 жыл бұрын

Again a truly awesome test of different sticker paper! Love your videos and thanks a lot. Ive been using cricut printable vinyl paper and it worked well for all my projects!

@sandral.madhere982 3 жыл бұрын

I just got my Cricut Maker and your videos have been amazing! I’ve been digesting them for days in preparation for my machine to arrive. Thank you so much for all the work you do to help others. :)

@AngieHolden 3 жыл бұрын

Glad you like them!

@sharonjansky3877 3 жыл бұрын

Thank you for going through all this effort. Truly appreciated.

@AngieHolden 3 жыл бұрын

My pleasure!

@melsmedia Жыл бұрын

Thank you Angie for always being so detailed with comparisons.

@AngieHolden Жыл бұрын

You are so welcome!

@lori-jocarroll 3 жыл бұрын

Great job!! Thanks for the all sticker type comparison printing/cutting. So helpful.

@AngieHolden 3 жыл бұрын

Thanks for watching!

@shantirowleyart 3 жыл бұрын

Awesome review!! Man, you put some work into this, Thank you, So helpful!

@akiwifer Жыл бұрын

Just bought my first Cruicut (I got the maker) and your videos have been so helpful! Thank you for this!

@gailgorenflo3501 3 жыл бұрын

I really enjoy your review videos. They are so informative. It must be a lot of work and time to do all of these comparisons. Much appreciated!

@AngieHolden 3 жыл бұрын

Thanks for watching!

@mrs.diannalynn1383 Жыл бұрын

Perfect video as always thanks Angie 😊

@JulieEbersole 3 жыл бұрын

Lady, your videos are so SO good! You go into so much detail and offer so many helpful suggestions and tips. Thank you so much for all the time and effort you pour into these--time-stamps and links, too! It is SO very appreciated! 💓

@AngieHolden 3 жыл бұрын

Thank you so much!

@Jakkunouno 2 жыл бұрын

Your an angel I’ve been needing something like this forever so glad I found you

@OcalaBrew 3 жыл бұрын

I’m so glad I found you early on in my cutting adventures! Now I depend on your comparisons above all else, and am so thankful to you for all that you do, Angie! Thank you! Because you asked for reports of other brands, here is one from me. I got lucky my first time out with my new Maker. I bought Buttercrafts White Vinyl Sticker Sheets. The claims that it will be jam-proof and not cause feeding errors, and is waterproof held up for me. True to its claims, it fed smoothly. I tested my stickers immediately after printing, and they were absolutely waterproof. They are much more reasonably priced than many brands, at $13.99 for 20 sheets. It is difficult to tell which side is the sticker vinyl and which is the backing, but I learned that if I stick each side to a good cutting mat, the sticker side has a velvety or suede like feel, but ONLY after that test. I also tested some that I cut too deeply with transfer tape, and that lifted some of the ink. Cut properly, it is easily removed from the backing. I notified the company and got a rapid reply. They are sincerely interested in feedback and said they would include my information about the transfer tape on their instruction sheet. I don’t need anything to use outdoors, so I have not tested for that issue. I will buy this paper again because it performed very well for me. Leap of Faith: I printed this vinyl to put on Cricut coasters, and would do so again!

@AngieHolden 3 жыл бұрын

Good to know!

@ycistaro 3 жыл бұрын

Angie, always love your videos. Always very instructive.

@AngieHolden 3 жыл бұрын

Glad you like them!

@VG-cr5nx 3 жыл бұрын

I wish I would have watched this before I purchased the Cricut thick sticker paper! You are so correct it would not feed through my hp printer, too thick. And I love the tape hack to get it to cut! Thank you!!!

@AngieHolden 3 жыл бұрын

Oh no!

@catherinedillberg1231 3 жыл бұрын

Thank you. I found this very helpful. I also tested 14. But only Matte and Glossy. (Joyeza, Aiva, Compandsave, NeotoLabels and Online Labels) For the glossy paper and HP envy, I have to place ONE piece of regular printer paper as far back from the tray on the bottom then place my glossy paper on top for it to feed. SETTINGS on printer matter to get the best possible colors.

@kathleenhodges5184 2 жыл бұрын

Thank you for being so efficient and thorough. This was a valuable and excellent review. Thank you. Photography quality and editing and audio description are EXCELLENT.

@AngieHolden 2 жыл бұрын

Glad it was helpful!

@angel37160 2 жыл бұрын

First I want to say I love all of your videos. I am fairly new to the Cricut world and you have made my life so much easier. I mainly use mine to make stickers. Would you consider comparing different printable holographic sticker paper or adhesive vinyl? Maybe include holographic laminates as well? Thank you for all you do for the crafting world.

@MadeByTriniLena 3 жыл бұрын

Great info Angie, as always ❤️✂️🧵

@AngieHolden 3 жыл бұрын

Thanks so much!

@denisejohnston6243 Жыл бұрын

I have been buying sticker paper from target..so far so good. Tjanks for all the video's you do! Much appreciated

@Cc-hh4qc 3 жыл бұрын

this was exactly what I was looking for thank you for this video!

@AngieHolden 3 жыл бұрын

No problem!

@bug_queen8574 3 жыл бұрын

Wow Angie - thanks for the comparison. I was looking to make a laptop sticker for my husband and wondering what to use. Without fail you have a wonderful comparison video! I have the Cricut printable vinyl and have decided it should be good to use based on your tests.

@AngieHolden 3 жыл бұрын

Go for it!

@bambisalazar1559 2 жыл бұрын

Thanks for all the information and tips.

@jenneferelie2292 3 жыл бұрын

Thank you so much for making this video comparison! I had done my own comparison but it didn’t turn out as good as yours! Love all of your comparisons

@AngieHolden 3 жыл бұрын

Glad it was helpful!

@julievilleneuve5845 Жыл бұрын

LOVE, LOVE, LOVE all of your videos...so much info and well explained and shown 👏👏👏👏👏🙂

@AngieHolden Жыл бұрын

Glad you like them!

@trevorbromley-palmer 2 жыл бұрын

I don’t have any personal interest in sticker papers, but I was completely engrossed watching your thorough testing. You are the perfect Cricut teacher. Thank you so much Angie.

@AngieHolden 2 жыл бұрын

Thanks for watching!

@AngieHolden 2 жыл бұрын

Thanks for watching!

@28Tonitoca Жыл бұрын

You are a sticker paper saver, thank you for sharing your reviews. 😊

@lancovey8055 2 жыл бұрын

great info!! thank you!

@gingeralexander3310 3 жыл бұрын

Thank you for sharing this. I just got my Cricut Explorer 2 and am considering doing stickers/decals.

@AngieHolden 3 жыл бұрын

Glad it was helpful!

@giseleharris3203 3 жыл бұрын

Thanks Angie you always do a great job! I use a laser printer but this will still help me in looking at brands.

@AngieHolden 3 жыл бұрын

Happy to help!

@ArinSauls 8 ай бұрын

Man oh man… I don’t know why this video didn’t pop up when I typed in “comparing sticker paper” before… But I have watched a few of them where they only compared like two or three and this is just freaking phenomenal. There are so many different types on Amazon and even going through the ratings and reviews makes it difficult to figure out what you want exactly and so I definitely appreciate this video…even though it is two years old at this point that I’m watching it.

@AngieHolden 8 ай бұрын

Glad you liked it!

@01samroberts 3 жыл бұрын

Your my hero!! First time using my cricut to make stickers and the clear sticker paper it wouldn't read. Did the scotch tape and it worked perfectly!

@AngieHolden 3 жыл бұрын

Yay!

@Lovetinaa 8 ай бұрын

Thank you for this video. It was very in-depth. 😊

@AngieHolden 8 ай бұрын

You are so welcome!

@patleonard2884 3 жыл бұрын

This was very informative! Thanks!

@AngieHolden 3 жыл бұрын

Glad it was helpful!

@mindymartinez4657 11 ай бұрын

thanks a bunch, this is the video I didn't know I needed!

@AngieHolden 11 ай бұрын

Glad I could help!

@olivia8979 3 жыл бұрын

You have seriously the best videos! Thank you for spending all your time and money doing all the research so we can attempt to avoid spending too much time and money finding the best products.

@AngieHolden 3 жыл бұрын

You are so welcome!

@conniel.4601 3 жыл бұрын

I agree! Love Angie's videos.

@1dulceritmo 2 жыл бұрын

Yes!!!!!

@damarisstanciu2784 Жыл бұрын

Yeees, thank you so much for sharing this info and thank you for the details, experiments and all the explanations given❤️ !!!

@jennaleahy Жыл бұрын

Omgosh!! So much work you are doing for us! I was trying and I get confused...what one was that. Lol. Thank you for all of your time! You are the best!! ❤😂🎉

@margaretfraserstewart9384 3 жыл бұрын

Thank you for doing these videos they're great. I am just about to delve into sticker making and these help a lot. Just need to see if they are available in the UK.

@AngieHolden 3 жыл бұрын

I am struggling with how to get the best resources for purchasing overseas! I would love to be able to offer those links as well but I just don't know how to get those for every circumstance.

@carter12362 2 жыл бұрын

Thank you so much, this is just what I needed!

@AngieHolden 2 жыл бұрын

Glad it helped!

@christinederosha245 2 жыл бұрын

Very informative video!! Thank you so much!

@AngieHolden 2 жыл бұрын

Glad it was helpful!

@happysunshine5906 10 ай бұрын

Wow! Worth watching the whole video!

@KatPlayzIt 3 жыл бұрын

Great video I got some Matt vinly sticker paper from joyeza and I love it

@jenpalubicki3179 3 жыл бұрын

Thank u. Great info. So helpful 💜💜💜

@AngieHolden 3 жыл бұрын

So glad!

@Reneesfun 3 жыл бұрын

Interesting. I was wondering why I was having problems with my Cricut Sticker Paper. I really like the Cricut printable vinyl as well. Thanks!

@AngieHolden 3 жыл бұрын

Glad it was helpful!

@yvonnealvizo 3 жыл бұрын

AWESOME review!!🙋🏻‍♀️💜tfs

@AngieHolden 3 жыл бұрын

Thanks for watching!

@tcoke9480 3 жыл бұрын

Thank you so much for this video!

@AngieHolden 3 жыл бұрын

Glad it was helpful!

@1dulceritmo 2 жыл бұрын

Omg you truly make amazing videos

@traceyandmichaelsmalley3525 2 жыл бұрын

Thank you so much. I have that Cricut brand and I was so frustrated and kept wasting. I'll check out the others. :)

@kathysanders5470 3 жыл бұрын

Great tutorial. Learned a lot of important information.

@AngieHolden 3 жыл бұрын

Glad it was helpful!

@danielleallred4717 3 жыл бұрын

I just use Avery label sheets for sticker paper. It works great for me!

@AngieHolden 3 жыл бұрын

Good to know!

@HomeschoolBooster 3 жыл бұрын

This video comes just in time!!

@AngieHolden 3 жыл бұрын

Yay! Hope it helps!

@cornbreadfedkirkpatrick9647 3 жыл бұрын

Well worth the watch, thanks.

@AngieHolden 3 жыл бұрын

Glad you think so!

@cornbreadfedkirkpatrick9647 3 жыл бұрын

@@AngieHolden Like the others said you put so much into this so we won't waste money or effort and yes worth it

@KingWillSkill 3 жыл бұрын

You're really the best. Thank you 🙌

@AngieHolden 3 жыл бұрын

You're the best!

@joycranfield9026 3 жыл бұрын

Rewatching cause I've misplaced my idot 📝 notes! Hopefully I'll not misplace them again 🤪 Thanks Angie

@wilmadavenport479 3 жыл бұрын

Very helpful....as always.

@AngieHolden 3 жыл бұрын

Glad you think so!

@trinastiles9762 Жыл бұрын

I've never had a problem with NEATO Waterproof Glossy sticker papers feeding thru any of my three papers. They are completely waterproof. However, I usually only put in one sheet in the printer at a time...they also have frequent sales on their website!

@rosamata3694 2 жыл бұрын

Thanks you sooo much!!

@AngieHolden 2 жыл бұрын

You're welcome!

@lynnconroy8 3 жыл бұрын

Once again, a most comprehensive comparison! You answered questions I didn’t know I had. Lol. I usually just use the digiorange sticker paper for my planner stickers. But, I’ve been trying to figure out the best for car stickers. I’ll go back and watch that video too. Question: Can you print a sticker using explore, then weeks later go and cut it? Does explore recognize what it’s supposed to cut after changing designs?

@AngieHolden 3 жыл бұрын

As long as you save the design, it will be fine. But if you alter the design AT ALL, the print will not work.

@string.cheese 2 жыл бұрын

Miss Angie!! I love you and your videos so much, especially these detailed comparisons. I am so grateful and appreciate all of the work you put in! I have request for you to consider when it comes to future videos like this - will you show the backing of each item you're testing? I have some sticker paper that isn't the best but it also isn't terrible. But the backing paper says "Please print your beautiful Stickers/Labels on the other side..." so I don't want to use it for items I'd like to sell cause, LAME! lolol. I'm new to stickers so this is the only brand I've tried so far (I purchased the paper in glossy and matte). When looking on Amazon for new sticker papers, it just doesn't seem to be a detail people mention in the product description or even the reviews. Either way, thanks for everything you do!!!

@AngieHolden 2 жыл бұрын

Oh interesting! I had not thought about that!

@yvonnetucker1416 3 жыл бұрын

GREAT DEAL ANGIE

@leighaparker8798 3 жыл бұрын

Love this

@AngieHolden 3 жыл бұрын

Thank you!

@bobbidonley5158 3 жыл бұрын

Can you recommend a removable sticker paper? Very informative video, thank you!

@eileen1157 Жыл бұрын

Thank you for such a thorough, informative video! Interestingly, I use an HP Envy 6000 series and one of my favorite sticker papers is one that didn't work for you... The neato, super glossy white waterproof!

@AngieHolden Жыл бұрын

So many people say they like it and I just could not get it to work!

@deanamarie4403 2 жыл бұрын

best and easiest way to laminate for stickers? thank you for all the fantastic info

@AngieHolden 2 жыл бұрын

I just use the laminate over them and then cut on my Cricut. I haven't really found an easy or fast way.

@aprilmost 3 жыл бұрын

Will you do a how to water slide method and which water slide paper

@AngieHolden 3 жыл бұрын

That is coming Wednesday of this week! Stay tuned!

@lisahughes3012 Жыл бұрын

i like this video😁

@laurajubee Жыл бұрын

Hi Angie I just saw ur video and was so helpful thank u. I have a question can I use a uv laminate over the Amazon transparent sticker the one u liked to protected from water

@AngieHolden Жыл бұрын

I think so!

@marlenenicholl6825 3 жыл бұрын

Thank you - had no idea there was so much stuff out there - I want to put vinyl on a folding end table that has slats on the top and it will sit under a covered patio that does not get sun or rain but I am in Florida where it gets humid in the summer - what do you suggest I use

@AngieHolden 3 жыл бұрын

I would use permanent vinyl I think. Sounds like that would do the job.

@amael1224 6 ай бұрын

I came across your video today and it is Great! How do I do face front adhesive to apply to clear acrylic?

@AngieHolden 6 ай бұрын

For a sticker, you will need to apply to the top of acrylic.

@amael1224 6 ай бұрын

@@AngieHolden Thanks Angie. I'd like for the print to be at the bottom of the ornament this way it is visible through the acrylic and I can add name on the top of the clear acrylic. That's why I was asking how do I do a front faced sticker - thanks!

@Palzies78 2 жыл бұрын

I love your videos . Can you please tell me what cutting on cricut did you use to make full sheet not decale

@AngieHolden 2 жыл бұрын

I am not sure what you are asking?

@digitaldarkroom07 3 жыл бұрын

Thank you for this! Do you need the matte tape if you are using a Maker 3? Also, have you ever tried Zicoto brand?

@AngieHolden 3 жыл бұрын

The matte tape is to reduce the glare from shiny sticker papers. I find my Maker will also mess up on those so yes you may need it.

@Justin_W 2 жыл бұрын

Very helpful! Thanks! I'm about to order a Cricut Explore 3, mostly for making stickers, some kiss-cut, but mostly die-cut. Is the blade that comes with the Cricut Explore 3 good for this, or do I need to invest in another blade? Thanks again for the best crafting videos on KZfaq!

@AngieHolden 2 жыл бұрын

The blade that comes with it is fine!

@Justin_W 2 жыл бұрын

@@AngieHolden Thanks!

@jeanniebee8235 2 жыл бұрын

I just picked up Hobby Lobby's Paper Studio. Have you tried that one? Thanks for all you do.

@AngieHolden 2 жыл бұрын

I have tried their vinyl and HTV and it is good so I wouldn't see why the sticker paper wouldn't be as well.

@KP-nx8lo 2 жыл бұрын

Can you print and cut on colored paper on the joy? Or just the maker? This was soo helpful and informative thank you!

@AngieHolden 2 жыл бұрын

The Joy does not do print then cut. Any other Cricut machine does but not the Joy machine.

@beachlifesoy2253 3 жыл бұрын

Did I miss where you gave the cut settings once the laminate was on? tia :) P.S. I respect all your responses to people as A LOT of people never do :)

@AngieHolden 3 жыл бұрын

I cut on the printable vinyl setting I am pretty sure but I just went over 2 to 3 passes.

@rhaps2008 3 жыл бұрын

❤️❤️

@rondasheive4280 Жыл бұрын

Hi love this video thank you. I am just learning to make stickers so this helps. When using cricut printable sticker paper clear for a kiss cut use material setting printable sticker paper clear? Is this correct? If you add a laminate to it then use for a kiss cut printable sticker paper clear but cut 2 or 3 times? Is this correct ? Thank you.

@AngieHolden Жыл бұрын

Usually that works!

@wailingsiren129 2 жыл бұрын

I have a Cricut joy and the Online Labels sticker paper. I was trying to see what settings you used to get the kiss cut. I am having trouble because the paper is so thin.

@AngieHolden 2 жыл бұрын

See if there is a washi tape setting and try that.

@stacynunez4924 3 жыл бұрын

for the clear sticker paper what printer setting did you use and how long did it take for the ink to dry?

@AngieHolden 3 жыл бұрын

It was dry almost immediately. For printer settings, I always use best quality.

@sagetx Жыл бұрын

OOOHHH. PRINT then cut. As a newbie I thought you had to change markers/pens for the printing part. Still learning! 11:27 Any idea if the Explorer 3 fixed the scanning problem on print / cut?

@AngieHolden Жыл бұрын

Explore 3 has an upgraded sensor so it should be better.

@Pixielovexxx 2 жыл бұрын

Would you be able to put a uv resistant laminant over the printable translucent sticker paper to make it waterproof?

@AngieHolden 2 жыл бұрын

Definitely worth a try!

@thelifeinthecaribbean.3669 2 жыл бұрын

Hi there.can you use the adhesive clear roll to put on top of your printable vinyl sticker?or it has to be that laminate

@AngieHolden 2 жыл бұрын

I haven't ever tried the adhesive clear roll.

@vickyburgess162 Жыл бұрын

What is a kiss cut, cut? My stickers cut through completely I just what to lift them off the backing paper. Do you have a video on how to do that? Thanks

@AngieHolden Жыл бұрын

Try this: kzfaq.info/get/bejne/itN-erCbyrunmac.html

@cricutcreationsdesignlynel1088 3 жыл бұрын

You really need to have a rear receptacle, the paper slides better on the sled

@AngieHolden 3 жыл бұрын

Correct. My printer does not have one but I love it for other reasons.

@christinabradford9707 2 жыл бұрын

What setting did you have your machine set to for the Orajet Printable Vinyl with the Oraguard Laminate? I had mine set to Custom-Printable Sticker White. It did OK, but I think it got hung up at times and I had multiple cut lines through the middle of my stickers.

@AngieHolden 2 жыл бұрын

I almost always use a matte paper setting when printing on sticker paper. Be sure to also change to best quality and turn off any fast printing.

@marilynarmistead7556 3 жыл бұрын

What I want is a sticker that can be put on my kids water bottles but can be washed without falling apart. Is there a way to make the glossy laminate a little bigger than the printed sticker so it covers the printed stickers edges from the water

@AngieHolden 3 жыл бұрын

Try this: kzfaq.info/get/bejne/a59jhaVpp8uWo2w.html

@chosen1one67 3 жыл бұрын

Great vid! I want to know which is the best clear sticker paper for Circuit that is waterproof ?

@AngieHolden 3 жыл бұрын

I don't have a clear one that is waterproof that I would recommend.

@chosen1one67 3 жыл бұрын

@@AngieHolden Aiva has clear waterproof paper

@ismyiafornville9164 2 жыл бұрын

Hi. What type of mat should you use for the printable stickers and what size?

@AngieHolden 2 жыл бұрын

The blue light grip mat is fine. The standard 12x12 is fine.

@avaonalee 10 ай бұрын

Do you have a comparison with holographic printable sticker paper??

@AngieHolden 10 ай бұрын

No comparison. Sorry!

@yvettedickey8015 2 жыл бұрын

Hobby Lobby has the brand 'The Paper Studio' , have you ever used this brand? I was given some and wondered if I should try it or just return it for something else. Thank you for all your helpful videos and info. As a newbie I've come to rely and search you out for my questions. Thank you :-)

@AngieHolden 2 жыл бұрын

I haven't used their sticker paper but I have used other products from that brand and all of them have been good.

@yvettedickey8015 2 жыл бұрын

@@AngieHolden Thank you :-)

@Themeparkpirate 3 жыл бұрын

on the clear sections... the difference is the amazon.. it printed darker than the other 2 I would choose the amazon for it is able to absorb color better than the other 2

@AngieHolden 3 жыл бұрын

I didn't see a huge difference but okay!

@Themeparkpirate 3 жыл бұрын

@@AngieHolden Yea.. it is not visible with the naked eye.. in the video you can tell :) it is just the ink was better absorbed with the amazon paper.. that's all

@sagetx Жыл бұрын

Ooh, another question... Any way to kiss cut THEN die cut for handing out 'quality' stickers?

@AngieHolden Жыл бұрын

It is tricky. You need to make multiple cuts on the die cut portion to do it all at once. I make an offset and copy it several times then locate those cuts over one another.

@hanbnan01 3 жыл бұрын

This might be a really dumb question, but how do you go back later and cut a print-then-cut file? It seems like you printed all of these and then later cut them. Do you do attach and then save your project?

@AngieHolden 3 жыл бұрын

If you don't change ANYTHING on your design, you can come back later and cut them.

@frgarcia89 3 жыл бұрын

Online Labels. Weatherproof glossy sticker paper. PERIOD

@AngieHolden 3 жыл бұрын

I have SO MUCH stuff from them but I didn't have any of their weatherproof in full sized sheets for the Cricut. If I do another comparison, I will add it as I love their stuff!

@user-zr8hc2pq6l Жыл бұрын

ORAJET PRINTABLE VINYL LINK INCORRECT. FYI Would like if the link was the right one.

@UniLaughing 2 жыл бұрын

Thanks for the great videos. I am trying to make stickers and my Cricut Maker 2 wants to kiss cut--no matter what setting I use! I have tried lots of different settings. OK--corrugated cardboard ripped up the whole sheet. I really want the stickers to be fully & individually cut out. The paper is the clear vinyl sticker paper from Amazon. Any advice?

@AngieHolden 2 жыл бұрын

Once it is done cutting the first time, don't unload the mat. Instead hit the go button again. It will cut over the same area again which should cut through the backing.

@UniLaughing 2 жыл бұрын

@@AngieHolden Thanks. I think I found my culprit--I might have put the wrong replacement blade in. I'm gonna do a little research on that. I may have more questions about it if I can't find anything. Thanks for all your informative videos.

@missjol 3 жыл бұрын

How can you tell the difference between your material once it’s out of the package? For instance permanent vinyl and removable vinyl and/or premium iron on, every day iron on etc etc. Once it’s out of the package and I (unfortunately) throw it away I can’t tell the difference between any on the material.

@AngieHolden 3 жыл бұрын

I can tell the difference between HTV and vinyl by looking at it. As far as permanent and removable, usually it has markings on the back of the sheet.