Video about sticky keys in pianos and how to fix them. Includes instruction on repinning flanges and key easing.
Пікірлер: 49
@maximlamoureux41292 жыл бұрын
that's an incredibly intense intro for piano servicing.
@Ddraig62SPD3 жыл бұрын
Our old piano had been stored for 5 years in our cold garage in the UK. Thanks to your advice, cleaning out the holes on the keys resolved the issue for 3 sticking black keys in the upper octave. I also managed to spot and resolve a few issues with misaligned hammers on the lower bass octave as well as straightening half a dozen bent damper lift wires. Many thanks for your expertise :)
@MrPianoTech3 жыл бұрын
Awesome! I'm glad the video helped!
@ackamack101 Жыл бұрын
I had wondered if sticky keys were related to humidity. I live in Colorado, which is usually dry, but we have have had an unusually wet summer here. I think the sudden moisture and rise in humidity and all of a sudden, some of my keys are sticking. Thank you for your informative videos! 👍😌🎹
@MrPianoTech Жыл бұрын
You're welcome, glad it helped!
@LuisGonzalez-jh3um11 ай бұрын
Wow, thanks brother, you’re a professional in your field. Resolved my sticking key issue… found quarters and paper lips jamming keys. I have four kids of course.
@MrPianoTech11 ай бұрын
Lol, nice. Yep, I’ve found all sorts of stuff in pianos deposited by children…and pets. Thank you for your kind words.
@dannixon2473 жыл бұрын
I love your pin box. And thank you for sharing your expertise. Cheers
@MrPianoTech3 жыл бұрын
Thank you for watching!
@kypianoservice3 жыл бұрын
Excellent video......and SPOT on!
@MrPianoTech3 жыл бұрын
Thank you so much!
@awride013 жыл бұрын
Awesome info, thank you Michael!
@MrPianoTech3 жыл бұрын
You are very welcome!
@krallopian Жыл бұрын
Right off the bat the first thing you said help! I just got a new piano, and my 5th octave c keeps sticking on me. I got a zip tie, and put it in front of the key as I press downward, and I cleaned out a tiny amount of junk that allowed the key to no longer be stuck! I saw a slight rubbing mark on the very bottom of the key, so using a zip tie I was able to get in there and get it cleaned! Now I have a piano that works again! I've been playing piano for over 35 years and I had never experienced the key being stuck because it was too close to the front board!!
@MrPianoTech Жыл бұрын
Awesome!
@GrndhwgStudioMagic Жыл бұрын
zip tie, a very simple tool that worked for me on a studio upright. thanks for this idea.
@eliasaquino2152 Жыл бұрын
Thank you so much for these videos!
@MrPianoTech Жыл бұрын
You’re welcome!
@Kuon2 жыл бұрын
Thanks!
@CosmosWorld2 жыл бұрын
Than you very much, you saved me from sticky keys!
@MrPianoTech2 жыл бұрын
Glad it helped, thank you for watching!
@conradsenior58432 жыл бұрын
Thanks
@shadowsxd14523 жыл бұрын
Hey , i have an old upright piano and i want to repair it a bit. I have trouble finding the key height rings and the dampers stopping the strings from vibrating after or even the whole thingy that stops it from vibrating because sometimes i press a key and the thingy moves and one string keeps vibrating and i need to readjust it again and again , can i do something about it or i need to buy new ones? Do you know where to find those in Europe? I live in Romania but any big store should work. Or the material they are made from , and if could make at least the rings home (like diy) Also , i see each key has a string , some of mine are bend in random directions , can i put any sort of a string , or it needs to be only designed for piano , i'm worried i could break it if i don't do it with the right components.
@MrPianoTech3 жыл бұрын
Thank you for watching! I would check with a supply house than can furnish parts to your part of the world. The string does need to be specifically for pianos. You may want to have a tech come and look at it, sounds like you have multiple issues.
@GGMayer Жыл бұрын
Thank you for the detailed guide. I work in a school which has no technician and it's too bureaucratical for requesting service. Humidity here is pretty high. I got two Kawais k-200 with a global sticky key and/or hammer problem. Could the A/C help at all? I'm trying to buy dump chasers, but up until then, could a regular dehumidifier do the trick?
@MrPianoTech Жыл бұрын
Hey Germano! In my experience with schools they have a hard time allowing piano teachers to keep the temperature where it needs to be for good humidity control. Pianos like to be at 45% relative humidity which is hard to achieve if the ac is kept too high. I highly recommend the idea of installing dampp-chasers. In uprights I use the 36-38A rod, which extends for installation in an upright, along with the H-D humidistat, which will keep it at 45%.
@GGMayer Жыл бұрын
@@MrPianoTech Thanks for the advise! I'll keep the percentage in mind and try to regulate it. Here humidity gets easily around 90%...
@MrPianoTech Жыл бұрын
@@GGMayer No problem! Yeah, that’s pretty high.
@bikewriter01542 жыл бұрын
How do you reduce the amount of force required to depress the keys? I purchased a piano recently and the store regulated and voiced the piano, but I have never played a grand piano that required so much force to depress the keys during regular playing. I believe that most grand piano actions are set so that approximately 50 grams of weight should be sufficient to depress the keys. My new piano is closer to 75 or 80 grams.
@MrPianoTech2 жыл бұрын
Sometimes it can be a matter of friction in the action. Key balance rails, center pins in the whippens and hammers can create enough drag to cause problems, as well as the front key bushings, especially if too much moisture is present. Key balance rail pins can lose their smoothness and cause a problem where polishing them helps. If all the components are moving freely the two main areas I look at are the letoff distance which should be about 2mm from the strings and lastly re-weighing the keys by replacing the key weights with new ones. That last one is a big job and doesn't need to be done very often but it may help. Without being able to lay hands on it myself those would be where I'd look.
@erabell9573 жыл бұрын
Good day. I Saw Your video and comes to me Just a question suddendly: how to fix a hammer when rebound? My piano has that trouble. Thanks You in advance
@MrPianoTech3 жыл бұрын
Hello Eduardo, thanks for watching! Does the key bobble and hit a few times quickly when you press the key?
@willianmota32702 жыл бұрын
Do you sell thoses tools?
@wardaxe10 ай бұрын
Thanks for your video. Question. I've got this piano where most of the black key get sticky to the white key. Not on the side but in the front. So if I press the black it doesn't come back because it gets stuck to the white key. How can I solve this problem?
@MrPianoTech10 ай бұрын
The only time I’ve had that issue, and globally across all keys, is when I encountered an action whose keys had been recapped and not properly trimmed around the edges. I’ve also had a couple here and there grab like that when the center key rail pin had gotten bent toward the front of the piano which moved the black key front closer to the white key.
@saveriosalerno92323 жыл бұрын
Thanks Maestro!!
@MrPianoTech3 жыл бұрын
Thank you for watching!
@huqiao2 жыл бұрын
One of my piano keys wouldn't reset when the sustain pedal is down. It doesn't have this issue if the pedal is released. What could be the cause?
@MrPianoTech2 жыл бұрын
Sorry for the late response, looks like youtube quit notifying me when comments are left. Sounds like a humidity issue. I'd say either the key needs easing or the hammer needs to be repinned.
@IAMLove336 ай бұрын
🙏💜🌞
@joleneholmes69343 жыл бұрын
Hi,from South Africa here,I have a question,is there supposed to be green stuff under the keyboard
@MrPianoTech3 жыл бұрын
Hello! Do you mean the felt under the keys or is it sticky green stuff on the pins?
@joleneholmes69343 жыл бұрын
@@MrPianoTech it's not sticky , it's in a circular form around the pin,probably the felt then. Is the felt the reason why the keys don't come up after pushing them down?
@MrPianoTech3 жыл бұрын
@@joleneholmes6934 If it's under the front of the key then it's the front key bushing. It simply keeps the front of the key from bottoming out on the frame and is adjusted for key dip. It shouldn't make the key stick although it will stick there if the pin the felt is around (that goes up into the front of the key) gets twisted and is grabbing the inside of the key, or if the inside of the front of the key has swelled and is grabbing the pin. Can you tell if either that pin is twisted or if the front key hole is too narrow and is grabbing the pin?
@Anonymous_world50002 ай бұрын
Don't press shift 5 times.
@ellenrosenblatt54633 ай бұрын
just let a professional tuner do this work.
@StudioSooner Жыл бұрын
VERY GOOD video thanks..but i had to stop watching because your camera goes in and out of focus causing my eyes to hurt!!! You gotta fix that as well as the piano!