Excellent post, very useful to FS56 and FS70 users!!
@mk15handymanАй бұрын
Thx for watching and thanks for nice comment
@jozefbircak8054Ай бұрын
Thank You for the video. After 20 years (yes... twenty-btw still works) I bought a second one FS 55, I was shocked that the greasing point is missing. Seller told me it is maintenance free.....!!! The old one I greased 1-2 x per year, never NEVER failed the gearbox. Great idea the greasing adapter, like it.
@mk15handymanАй бұрын
Glad I could help! Thx for your comment
@jimaragon2110 Жыл бұрын
Thanks for posting this, I really appreciate it. 👍
@mk15handyman Жыл бұрын
Hi Jim. Thanks for that comment. You just made my day 😀
@JM-jd7yp2 ай бұрын
Good idea. Just bought one and I knew the gearbox needed greasing but I love the useage of the nozzle to reach the correct point. Thank ou and I wish you well.
@mk15handymanАй бұрын
Thx very much for your comment
@Weissbierdrinker13 күн бұрын
Always learning and thank you so much for your video my friend, helped me a lot 👍🌿
@mk15handyman11 күн бұрын
Glad to hear that. Big thx for your massage
@OuttaHere72 ай бұрын
Brilliant! Kudos to you for thinking to post this! No Kudos to Stihl and Echo that decided they could show they don’t really give a damn about making products that are easy to maintain😡
@shangrilaladeda8 күн бұрын
the commercial models from echo have the grease point
@zsolt69073 ай бұрын
Just what I was looking for, very useful info, thank you!
@mk15handyman3 ай бұрын
Great to hear!
@attilamolnar271311 ай бұрын
Thanks, i have fs 55, the video is very useful !
@portiesbrew7247 ай бұрын
Thank you for this - mine keeps welding the line in the head so hopefully a bit of grease will help stop getting it so hot
@mk15handyman7 ай бұрын
Hopefully that will resolve your problem. Thx for watching and getting back to me
@snoopfurlow12753 ай бұрын
A tab bit of oil in the spool,grease the flex shaft,gear Head assembly
@cayrickАй бұрын
Exactly the video I was looking for. Thanx!
@mk15handymanАй бұрын
Glad it was helpful! Thx for watching. And please like and subscribe
@shabadoo2417 күн бұрын
I just put a grease fitting in the hose of the grease gun and use that to get grease into the slot
@simontrangmar45379 ай бұрын
Thanks very much for sharing this tip. Regards Simon / Adelaide / Australia
@mk15handyman9 ай бұрын
You are so welcome. I'm glad it was useful for you. I love Adelaide :)
@danielpadgett28312 ай бұрын
Excellent tip thank you for posting 👍👍
@mk15handyman2 ай бұрын
No problem 👍
@hotwheelsracer638011 ай бұрын
I have a video on doing this exact thing! Great job brother🤘🤘
@mk15handyman11 ай бұрын
Thx
@venturahwy768 ай бұрын
thank you
@sandormolnar11 ай бұрын
Köszönöm!!
@davidthompson99363 ай бұрын
thank you very much mk15handyman very helpfull indeed thank you
@mk15handymanАй бұрын
Happy that you liked it and thx for your comment
@tdokАй бұрын
I wonder if you can put a 1/4" zerk onto the head for easy greasing.
@philliphall51982 күн бұрын
Going to try it on the next junk unit
@sarahknight499626 күн бұрын
Thanks for the maintenance tip. The Stihl dealer says these are sealed & non-serviceable. Guess is they want to sell more trimmers. Even a sealed unit that doesn't leak will break- grease is subject to heat & shearing ( parts rubbing on each other) causes the grease to dry out. If the dealer had told me before purchase the gear unit was sealed, I would have bought one that wasn't sealed. Dealer will also tell you that replacing the gears cost nearly what the machine cost to begin with.
@mk15handyman21 күн бұрын
Thx for your comment and for your thoughts
@rutbuster112 күн бұрын
You can drill and tap the side of the head for a grease, (zerk), fitting there without any problem. I've done it before without any issues. Takes about 15 minutes.
@johnharte272928 күн бұрын
Ta ,thanks good tip.
@mk15handyman21 күн бұрын
Thx for your comment
@captainsmokey922310 ай бұрын
I am using small 2.5cc syringe and fill 2.5cc to 3cc is enought but greasing 2 times a season. I will do today. Cos my main brush cutter sub one is bike gandle shindaiwa mountain use professional.
@21elkaholicАй бұрын
How did you take out that screw on the bolt after taking off the cover? I feel like I'm gonna brake the wrench it's on solid
@mk15handymanАй бұрын
be very carefull. i have broke the original and replace it with better one for easy usage in the future. make sure you have bright size tool to undo it as its really tight
@jimlaw60179 ай бұрын
I come to a halt at the 1.33 mark. The screw/bolt will not screw out. The nearest allen wrench in either metric or us either spins or gets a grip that can strip the female part of the screw out. I notice that you have a whacking big bolt. Did that mean you stripped the allen wrench and replaced it?
@mk15handyman9 ай бұрын
Yes I had the same problem and I have replased that bolt for easyer usage for future
@Crete__Life11 ай бұрын
Do you think it's feasible to add a grease zerk fitting where its missing there grease access point?
@mk15handyman11 ай бұрын
I think it is possible. Not bad idea - but after the warranty. For me it's not that big problem as this machine is my backup and only need to do this one per season
@davebrock66188 ай бұрын
been thinking of doing that but haven't seen anyone else showing if it can be done.
@harryerhart59782 ай бұрын
Do that with your fc91 edger also
@mk15handymanАй бұрын
Thanks for your comment. I appreciate it
@martyledford361411 ай бұрын
Where did you get the tip
@mk15handyman11 ай бұрын
the perfect tip is from silicon tube, the screw on tipe. It fits perfectly and cost almost nothing
@nickl82472 ай бұрын
I never know how much grease to squirt in there
@mk15handyman2 ай бұрын
Not too much. It depends how heavy its been used
@xuvitosheqi72697 ай бұрын
What type of gear box is fa 55 called😢
@snoopfurlow12754 ай бұрын
Non greaseable gearbox.they don't last long,i purchased one from eBay,still going strong