STOP AND GO TIRE PLUGGER WILL GET YOU OUT OF TROUBLE ON THE MOUNTAIN ROADS

Рет қаралды 98,403

Күн бұрын

One thing that can ruin your mountain drives is getting a nail, screw or even a bolt in your tire. In today’s video I am going to show you how to repair a tire when that happens.
Over the past several years there were a few occasions where our runs were interrupted due to a damaged tire. Luckily in each case we had the Stop & Go - The Tire Plugger with us to get us back on our drive. A shout out to my friend Luke for introducing me to this kit.
Let me show what all is included with the kit and how to use it!
CONNECT WITH US!
Find out more about us here: www.rsxperience.com/
Learn about our events here: www.rsxperience.com/events/...
Come check us out on instagram too: / rs.xperienc. .
📌... and if you enjoyed this video please subscribe and hit the bell so you get notifications of new videos! / rsxperience. .
OTHER VIDEOS YOU'RE LIKELY TO ENJOY FROM OUR CHANNEL
If you liked this video you might also be interested in our other Car Gear videos:
🔥 WHICH DETAILING SPRAY OUT OF THESE 7 DID THE BEST JOB? My very non scientific test results: • WHICH DETAILING SPRAY ...
🔥 PORSCHE 991.2 GT3 RS PERFORMANCE & SPECIFICATION - CAR GEAR: • PORSCHE 991.2 GT3 RS P...
🔥 DUNDON MOTORSPORTS AND CRACK PIPE CRAZIES - INTERVIEW WITH CHARLES DUNDON AND JAMIE BOPP: • DUNDON MOTORSPORTS AND...
🔥. RACING & STREET CAR WHEEL ENGINEERING WITH FORGELINE MOTORSPORTS RACING WHEELS, performance car gear: • RACING & STREET CAR WH...
Driving in the Great Smoky Mountains national park - Dash cam tours, dashcam:
DRIVING MOONSHINER 28 - • DRIVING MOONSHINER 28 ...
DRIVING HELLBENDER - • DRIVING HELLBENDER - P...
DRIVING THE TAIL OF THE DRAGON - • DRIVING THE TAIL OF TH...
DRIVING THE CHEROHALA SKYWAY - • HOW TO DRIVE THE CHERO...
You have been watching Andy Papa, Founder RS Xperience in: RYOBI R18P1-0 18v ONE+ POWER INFLATOR REVIEW 2021 - • RYOBI R18P1-0 18v ONE+...
*****
ABOUT RS XPERIENCE
Find out more about us here: www.rsxperience.com/
Learn about our events here: www.rsxperience.com/events/
Come check us out on instagram too: / rs.xperienc. .
Hi, I'm Andy Papa, Founder RS Xperience, I'm glad you stopped by! You’re here because you too have a passion for car driving! So welcome to the ultimate sports car rally for adventurers who live to DRIVE!
My interest in Porsche began as a teen when he hung a picture of the iconic 930 Turbo on his bedroom wall. My dream of owning a Porsche came true and soon afterward quickly discovered GT cars, but I have a love for the engineering of super cars.
After many years as an enthusiast of high-performance driving, I became an instructor and today I share my passion by teaching driving enthusiasts car control on the track and on the road. I currently own a 991.2 Porsche GT3 RS.
#StopandGoTirePlugger #CarGear #CarGearReview #StopandGo
#DrivingExperience #SportsCarRally #Mountaindriving
DISCLAIMER
The contents in this video are for informational and entertainment purposes only and does not constitute financial, accounting, or legal advice. I can't promise that the information shared in my videos is appropriate for you or anyone else.

Пікірлер: 61

@xtbro78 10 ай бұрын

I'm a woman with some hand arthritis, and for myself I like the way the smaller kit w/out the "gun" works. It comes in a canvas case I think. Using the small (Allen?) wrench to gradually screw the plug down into the tire. The same job just done in a different way, and not requiring as much strength or grip. Another plus for me is it takes up less space to carry. My tires are off-road type on a large Jeep, so likely a bit tougher than a sports car. This kit looks like the thing to carry!

@lukeanderson7757 2 жыл бұрын

Your welcome...thanks for the shout out Andy! Ironically, I had to my kit again recently on my wife's BMW I3. My wife was actually impressed, which normally is not the case for all my car and gear stuff...lol.

@RSXperience 2 жыл бұрын

It came in handy at our one event. A guest in their Cayman S got a screw in his tire. We fixed him up and we were on our way.

@ralphgarcia3366 8 ай бұрын

I must have received a defective gun, had to return, with handle squeezed 5 times with plunger bottomed out plug wouldn’t even make it to the funnel looking tip. Seemed like a good concept. I’m sticking to the rubber tubes and glue.

@johnlong7504 11 ай бұрын

Thanks for the info-clip and for, unlike many other well known folks, not calling your beautiful sports car a "porch" - take care & put the hammer down!

@justinroberts8496 Жыл бұрын

“Might need a little force to get that thing in there”😂😅

@RSXperience Жыл бұрын

That was a struggle. I’ve gotten better at it. You really need to make the hole bigger.

@TBD3.0 Жыл бұрын

I just did it 👍🏻 It was easy peasy 👍🏻 Let's see if the plug will last 800 miles.👍🏻

@RSXperience Жыл бұрын

Great news!! It’s not too difficult, especially once I figured it out. I had one in my tire for about 1000 miles. Good luck.

@cidpusa700 Жыл бұрын

Awesome impressive

@RSXperience Жыл бұрын

Thanks for watching.

@popoymotmot Жыл бұрын

Can you still drive at high speed with that diy plug?

@joseholguin661 Күн бұрын

Can it plug a semi tire?

@mediascribble 5 ай бұрын

I've been looking at a few videos about plugging tires, and I just did one last night, and this seems far and away more difficult than the manual way of doing it without the gun. The whole point of the gun is to make it easier, and I guess the force part is reduced, but it's more involved in tough conditions typically with all the steps to get right. If you lubricate a bit with the manual tools it should be fairly straightforward and easier to navigate. I didn't use lubrication, but rather some glue, and I still got a small screw hole fixed with some effort.

@RSXperience 5 ай бұрын

Admittedly the gun can create some challenges especially if unable to remove the wheel.

@jcodaniel5678 4 ай бұрын

I have the same kit, but my gun doesn’t push the plug out of the tip. I think it’s cool concept, I have had success using the manual ones

@RSXperience 4 ай бұрын

I had the same issue early on. When I made the hole larger with the auger tool it worked fine.

@MDHanif-og3kp 7 ай бұрын

thank you Bangladesh

@larry0465 10 ай бұрын

Looks good but doing that with a tire still mounted on the car could be a challenge, a regular slime plug is faster and easier.

@drizler 7 ай бұрын

I can’t sy why but those Slime Plugs have started giving me fits in the last couple years. I’ve used the string type since the 70s when as far as I saw the plug guns I saw at garages went away. It was supposedly about not working with the then new radials🤔 . Anyways they came out with the red string types supposedly for radials and they were fine for decades . I used some rubber cement on them both as lube and to help lock them in. The package said use the red for radials and black for old bias types and I just went with it. I had issues with only one or two and it was on nearly bald tires. On some I additionally Slimed them if they leaked slightly. Some time back I noticed the redo ones from Ames and K Mart ect went away and only the Slime Black are all that is available so I went with them. That’s when I started having issues with the real issues of continual seeping. With the tire sensors I was / am reluctant to slam them with a full load of Slime. Well Two weeks ago o got the double whammy with a biogas’s industrial building steel outer wall screw in the middle of my F 150 Tire followed by a smaller one on my boat trailer, both radials. The truck one was big though I fixed both with the strings and watched them a week or so. Darned if one day my boat tire died at the boat ramp park out while I was on the water. Nice pain changing it in the dark. Then double whammy as the truck s tire did the same thing a week later with more fun in the dark after working fine for a couple weeks since the fix. That’s when I said ENOUGH and bought that green gun off Amazon. I will say it’s built so beefy that I had to put a magnet to it to figure if it is steel or aluminum it’s that beefy. I have to say it’s pretty easy to use and the direction sheet is fairly painless. Time will tell as that truck tire holds air fine but it isn’t back on the truck yet and it held fine with the string before failing. As for those black Slime strings it’s just my observation but after decades of using those things I’d say avoid the Slime brand and go with something else. As for the mushroom plugs and gun they are nothing but pure rubber . It seemed to plug that big hole very well but I wish there was. Way to gunk it with rubber cement without flopping the gun tip all up inside. Perhaps cleaning it out after use with solvent , I don’t know yet. As I said earlier time will tell.

@cbrrebates 6 ай бұрын

I have this tool. it leaks. Not better than strings

@chrisbennett5796 11 ай бұрын

Is it possible to use any kind of lubricant when inserting the nozzle/probe? I am thinking that this might make it possible to screw the nozzle onto the gun by turning it, and not by turning the gun. As you said, this might be pretty difficult on a real tire puncture on some cars. I have one of these kits (haven't had to use it yet). I was wondering what the slippery stuff on the plugs is and if it is available separately, to use on the nozzle?

@RSXperience 11 ай бұрын

Good question. Having used the kit several times now I find that reaming out the hole is the best solution. You actually need to make it larger than you may think. Then the slickness of the plug makes inserting so much easier.

@MrBigBoy4Life 5 ай бұрын

I use a lubricant with my girlfriend at times. There are times when inserting my nozzle takes some effort and lube makes it glide smoother.

@israelgrinshpun1410 10 ай бұрын

Does Plug Kit containes a few diametr mushroom plugs or only one

@RSXperience 10 ай бұрын

Only one diameter.

@israelgrinshpun1410 10 ай бұрын

If I need to use 2 mushroom plugs one near another, should I reeming ones or two times

@RSXperience 10 ай бұрын

If there were two punctures in the tire near one another I would advise replacing the tire. If it is a larger puncture using multiple plugs may be an option. I’ve seen it done before where three plugs were used in a large hole caused by a bolt. YMMV.

@bocahmanut8573 Жыл бұрын

👍👍👍👍👍

@Benzknees Жыл бұрын

What keeps the plug in whilst you're driving around? Is it just friction, or is there glue on the outside of the plug?

@RSXperience Жыл бұрын

Thank you for watching. There is a mushroom head on the one end of the plug that expands once inside the tire. Makes a seal larger than the whole. I have had no issues with leaking on tires I have used it on.

@diegosauda-zy4uw Жыл бұрын

air pressure from inside keeps the plug against the inner part pf the tubless tyre,you cannot use this if you have a tyre with the inflatable tube in it

@GTAIVisbest 8 ай бұрын

Can I reduce the chances of the mushroom plugs developing leaks by coating them with rubberized cement before insertion, just like with rope plugs? I see a lot of comments saying it will help, but the mushroom plug is made of a different type of rubber that does not vulcanize, so I feel like rubberized cement won't do anything

@RSXperience 8 ай бұрын

I don’t know the answer to that specific question. From personal experience I’ve driven spirited on mountain roads with no issue. Until I needed to replace the tires. YMMV.

@Smiler7 7 ай бұрын

Are all mushroom inserts the same size?

@RSXperience 7 ай бұрын

Yes.

@Smiler7 7 ай бұрын

Thank you@@RSXperience

@joeshmoe74 8 ай бұрын

I don't trust it, the sticky plugs form to the damage where as this looks like it can possibly wiggle itself out at any time

@RSXperience 8 ай бұрын

Understood. It comes down to what you’re comfortable with. I had mine in for several hundred miles before I replaced all 4 tires. The plug has a mushroom head that expands once in the tire to prevent it from coming out. Although YMMV. I would not used the plugged tire for HPDE events.

@aliqnasri5994 2 ай бұрын

Only cost 13 dollar here. It need glue to seal nicelly.

@kp5518 Жыл бұрын

No thanks , I will stay with the sticky $6 rubber strings repair kit. I had nail on the sidewall and used that simple needle rods and a dap of super glue at the tip of the plug. It's been 1.5 year 8000 miles and still no leaks....😂👍

@again5162 Жыл бұрын

Same here had a sidewall scratch been 2 years since the plug and no problems

@mohammadhassanshoshtari5066 Жыл бұрын

Hi. Where can I find that kid?

@illiyakuryakin3092 Жыл бұрын

No “Kids” were used in the filming of this video.

@Rahulp204 7 ай бұрын

How to purchase kit

@RSXperience 7 ай бұрын

You can purchase at Walmart or Amazon that I am aware of. Here is Amazon link. a.co/d/8wJe8IV

@Joker7777771 8 ай бұрын

800 miles i want my plug to last

@mikebergman1817 4 ай бұрын

Just 800 miles?

@alp3781 8 ай бұрын

I don't think so. Go the kit, tried it twice on my motorcycle, leaked badly. Both holes where not even on any thread. followed the instruction all thr way. Spent money for nothing. Back to ther old way. Rubber glued strings are the best.

@chandrakantupadhye2991 8 ай бұрын

Give address of this product

@RSXperience 8 ай бұрын

Here is a link to the product on Amazon. Stop & Go 1085 30 Piece Deluxe Tubeless Tire Plugger Repair Kit Punctures and Flats on Car, Motorcycle, ATV, Jeep, Truck, & Tractor (25 Mushroom Plugs) a.co/d/905AbTS

@dimitricostiuc4401 2 ай бұрын

I hope you were paid enough for this review This tool is absolutely worthless. yet, Somehow Amazon is showing over 2000 x star reviews. Just think about for somebody, it could be life or death situation on the road.

@RSXperience 2 ай бұрын

Nope. Not paid. At first it isn’t the easiest thing to use. Once you figure out the need to make the hole bigger with the auger tool the better the experience. and makes using the gun easier to use.