STOP “Before” your winch breaks

Рет қаралды 24,502

Thomson Equipment / Dozer Winch Parts

4 жыл бұрын

Winches on CAT, DEERE, Komatsu, and any other dozer are rated for maximum line pull. They do not have redundancy ratings like many crane, hoist, or marine winches. Having a sensor to tell you when you are getting close to that maximum load is key, especially on PTO winches.

Пікірлер: 32

@lembriggs1075 2 жыл бұрын

I’m so glad that you care so much for your customers.

@Stoparts Ай бұрын

Bravo colleagues, cool channel and content

@RichardJW1 2 жыл бұрын

very interesting! many thanks

@laneburgess1643 3 жыл бұрын

Great video.

@crimson5288 3 жыл бұрын

this is very informative

@maskeenabbasi9319 Жыл бұрын

❤❤❤ good

@pricetag30 Жыл бұрын

Ya but i like to pull stuff until it snaps!

@treashurehunter800 Жыл бұрын

Do you have any smart shackles in stock? Are they maranized? You're using some sort of dielectric paint to interact with the sensor nodes. Will this function and salt water application for Marine salvage work? Do you offer one in that line? I appreciate from hearing from you thank you very much.

@Guust_Flater 2 жыл бұрын

Can you set a load alarm i.e. a buzzer or led ? So if you set it to 100T it will give an alarm.

@alimoenadisoepardi7996 2 жыл бұрын

Where can I buy a winch which country is this cause I am from Suriname a country from South America where can I go online to buy

@angelsalas3357 10 ай бұрын

Hi.. I ned held to my winch is working in the 518 cat.. Is to hard to pull when is free.. I ajust de break bat not we need 3 pearson to pull de cable

@thomsonequipmentdozerwinch 10 ай бұрын

What model winch is on your 518? Send us an email sales@thomsonequipment.com

@lonnielemaster7053 3 жыл бұрын

Would you have or happen to know where I could find a adapter bracket for a Gearmatic 19 to a 450C case dozer

@thomsonequipmentdozerwinch 3 жыл бұрын

We support a lot of gearmatic winches helping owners make repairs to the internal components. Finding the mounting brackets for a specific install is really tricky on the old stuff. Nothing in stock right now for Gearmatic 19 brackets to bit Case 450C. Small winches are tough. You can find more information here: dozerwinchparts.com/blog/small-dozer/ Sorry, we can't help at this time.

@user-wc1hp5dw1s 7 ай бұрын

Thomas equipment do you have any gear o matic winch for 64 international td-340a dozer from travis

@thomsonequipmentdozerwinch 7 ай бұрын

Send an email to sales@thomsonequipment.com we can help you find a winch

@warpedbeyondhelp 2 жыл бұрын

Winch availability for my 1949 HD5 track loader? E24 or an ea possibly?

@thomsonequipmentdozerwinch 2 жыл бұрын

Bad news….. those are nearly impossible to find in working condition that are complete with all the install parts. Might be one out there somewhere but we don’t have one unfortunately

@wilmamcdermott3065 2 жыл бұрын

You have winches do u have any older dozers? Iam looking for parts to restore an old D7

@thomsonequipmentdozerwinch 2 жыл бұрын

We used to have a fleet of rental equipment and inventory of dozers, but we currently have limited dozer stock on hand. We do have some parts available. Please e-mail what you're looking for to parts@thomsonequipment.com and we will try and assist.

@StumpjumperVideosPA 3 жыл бұрын

great idea how much ?

@thomsonequipmentdozerwinch 3 жыл бұрын

Prices range wildly when looking at capacity and features as some include data recording and extra software. We currently have a 13.5 ton shackle that's shown at the end of the video in stock for $2,500 certified by the manufacturer (only 1 avail). The shackle and load sensing unit are working rated at 13.5T, but the rated failure point for both is over 50 Ton if your pulling situation safely allows. We can do larger shackles rated for big loads as well but they get heavy and costly in a hurry. Some of the larger ones with recording devices can exceed 10,000 USD.

@Jamestreeman 2 жыл бұрын

Would this work on my crane

@thomsonequipmentdozerwinch 2 жыл бұрын

If you're asking about the smart shackle for use on a crane the answer is YES. The sensor sends a signal to the display showing load. It will tell you the load being pulled or hoisted regardless of vertical or horizontal orientation. It works really well in increments of 100 lbs.

@Jacob-zd4gj 2 жыл бұрын

I currently have a dramatic 19 winch on the back of my international td8. Where could I get parts or a part breakdown. Mine doesn't seem to pull very smooth

@thomsonequipmentdozerwinch 2 жыл бұрын

kzfaq.info/get/bejne/fdGqn9Wlzd3em4U.html I can send you a manual and the parts breakdown of the gearmatic 19. Shoot me an email parts@thomsonequipment.com

@thomsonequipmentdozerwinch 2 жыл бұрын

dozerwinchparts.com/content/MODEL%2019%20Gearmatic%20USE%20THIS%20ONE%20W%20BRADEN%20NUMBERS.pdf

@thomsonequipmentdozerwinch 2 жыл бұрын

There is a link for the PDF as well. I suggest you review our other video on the Gearmatic 19. (there a couple of parts you REALLY do NOTwant to damage)