No video

STOP DOING THIS! How To Use A Circular Saw THE RIGHT WAY!

  Рет қаралды 256,649

VCG Construction

VCG Construction

4 жыл бұрын

STOP DOING THIS! How To Use A Circular Saw THE RIGHT WAY! featured in this video are two circular saws from #MilwaukeeTool M18 FUEL REAR HANDLE 7-1/4" CIRCULAR SAW (2830-20) as well as the new MILWAUKEE M18 FUEL 8" METAL CUTTING CIRCULAR SAW (8.0AH) KIT 2982-21 the #VeryCoolGang shows you the proper way to use a circular saw and the right way. We also talk about a bad habbit for tradespeople that use circular saws and why you need to stop doing this!
Shop our affiliate and VCG Construction may earn a commission:
MILWAUKEE M18 FUEL 8" Metal Cutting Circular Saw Kit 2982-21: shrsl.com/2a7mv

Пікірлер: 271
@jeffersonguzman2579
@jeffersonguzman2579 4 жыл бұрын
I just realized I'm watching an advertisement video.
@zm7160
@zm7160 3 жыл бұрын
Looking for tips on how to care for a Skill Saw? Just buy this one you swine! What a terrible video.
@strykervalkyrion
@strykervalkyrion 4 жыл бұрын
"It wont work with the cover off" Bruh there's no battery 😂
@jessefield2065
@jessefield2065 4 жыл бұрын
I'm glad you said it.. i was gunna comment that
@eblancho871
@eblancho871 4 жыл бұрын
Same love how they cut it out to try to save face :)
@tito387
@tito387 4 жыл бұрын
I was going to say the same thing lmao I guess that will go to the blooper reel lmao.
@williamm.7978
@williamm.7978 4 жыл бұрын
Seemed like he was trying to be funny to me
@Timothy-NH
@Timothy-NH 4 жыл бұрын
I was sitting here chuckling at that pretty good; seriously, how many of us have been trying to use our cordless tool, and took a few clicks of the trigger before we realized there was not battery on it. LOL
@chuckschillingvideos
@chuckschillingvideos 4 жыл бұрын
Just cover the baseplate with masking tape and replace as it starts tearing away. Easy peasy.
@sputnik9708
@sputnik9708 3 жыл бұрын
I burned a cover plate out on my plasma table. Slides over the bottom and tightens down with a finger screw. Takes 10 seconds.
@dandesotel5954
@dandesotel5954 4 жыл бұрын
I love this version, I have had the corded version model 6370-20, have had it for 8 years and used it all the time steel stud framing.
@anthonyginevan7633
@anthonyginevan7633 3 жыл бұрын
@VCGConstruction As an Ironworker I have used this saw a whole lot. Anything from metal sheeting, decking and I Beams. And I love it! Great recommendation for those who may have not discovered this tool as of yet.
@reddbeard2030
@reddbeard2030 4 жыл бұрын
Vince is a really comical guy! Thanks Vince, You once again bring that special magic to tool explanation.
@rexoliver7780
@rexoliver7780 4 жыл бұрын
That new cordless Milwaukee metal cutter saw is a HOSS! I have the plug in model and the Skilsaw WD 8” metal cutter.Like both!
@jlang8213
@jlang8213 4 жыл бұрын
They all work together despite their differences...to bad people can't do that 😞
@joq702
@joq702 4 жыл бұрын
Vince is credible because he is in the trade that uses this type of equipment he reviews. Thanks sir. Keep up tje great reviews and fun commentary.
@Aepek
@Aepek 4 жыл бұрын
Like the Makita metal Circ saw, as it collects “chips” really well & does a good job at cutting. Been the go to for years; but after seeing this saw; would really like to try it out & compare them. Love the fun having with the “battery talk”, That made me smile 😅 Maybe 8.0 battery works well & does reduce weight with still giving a good performance & run time🤷🏼‍♂️ Have a good one✌🏼
@VCGConstruction
@VCGConstruction 4 жыл бұрын
Thanks Aepek, we appreciate the feedback!
@weldplanet8806
@weldplanet8806 4 жыл бұрын
I bought this kit about a month ago and I love it! So worth it. After every cut it’s weld ready!!! Nice and clean. love it
@Eger118877
@Eger118877 3 жыл бұрын
@VCG Construction, after using my DeWalt 6-1/2" blade left circ saw, I don't know if I could go back to blade right. I really like the sight line on the blade left.
@mannyortiz2292
@mannyortiz2292 4 жыл бұрын
Just gotta say Vince, I got those glasses because of your review, and I believe those are some of the best safety glasses I've ever used. So comfortable and fog free!
@ernbauti
@ernbauti 4 жыл бұрын
Hi, what is the brand of the glasses? Would like to get some, thanks.
@mannyortiz2292
@mannyortiz2292 4 жыл бұрын
@@ernbauti it's the newish milwaukee Safety glasses. I got the one with a gasket. It was strange at first because I'm sorta used to have glasses fog up when also wearing a mask. It never happened with these but I always felt like it was going to happen at any minute.
@jasonpfister3629
@jasonpfister3629 Жыл бұрын
I did know that obviously the8.0ah was a longer lasting battery than the 6.0ah but did not know about the difference in architecture inside for the added power and runtime. I have been watching a lot of the V.C.G. Videos to learn more about the tools I have and some I plan to buy. Waiting on my 3plane laser to ship and biting my nails in anticipation of its arrival. Thx for these videos and look forward to seeing more of the as more tools come out. Stay safe out there, thank you again - Jay Pfister
@chipshot442
@chipshot442 4 жыл бұрын
Wowwww, I could have used that saw to cut re-bar 30 years ago. They are coming a long way!! Awesome video Vince!!!
@VCGConstruction
@VCGConstruction 4 жыл бұрын
Thanks Chip!
@MufMurderer
@MufMurderer 4 жыл бұрын
I only know the difference between the 6.0 and 8.0 because I asked you a couple days ago on Instagram. Thanks again!
@PersonaN007Grata
@PersonaN007Grata 3 жыл бұрын
Have the M12 metal cutting saw and it’s been great. Will have to get the M18 for bigger jobs.
@chevy5137
@chevy5137 3 жыл бұрын
I didn't know about the cells being better is what was making the same size batteries more powerful until I heard you talk about it in another video Vince, I always wondered with the XC 3.0, 4.0 and 5.0amp batteries since they were all the same size. I never saw a reason to get a 3.0amp battery when I could get a more powerful longer running 5.0amp battery that was the same size even though the 5.0amp batteries cost a little more, same with the 1.5 and 2.0amp batteries.
@markfrazier7046
@markfrazier7046 4 жыл бұрын
Thanks for the recommendation to read the manual. That is a good reminder. I think the 8 inch blades will be expensive.
@AntonioClaudioMichael
@AntonioClaudioMichael 4 жыл бұрын
Performs pretty well even for a right facing saw might pick one of these up i do alot of welding on mobile automotive service calls great video Vince Cuz @vcgconstruction
@chevy5137
@chevy5137 3 жыл бұрын
Holy shit the thickness of the metal that is cutting is just crazy! We would use an oxy-acetylene or a heavy duty plasma cutter to cut metal that thick back when I worked as a welder fabricator. I could never have imagined a cordless saw cutting metal that thick, what a freaking monster! I would have killed to have one of those back then, it would have been so nice to have when cutting truck frames in half when doing frame stretches to make super clean straight cuts!
@marcowens3522
@marcowens3522 2 жыл бұрын
Not crazy at all its basically like a grinder just in a skill saw Form.
@joelinn7328
@joelinn7328 3 жыл бұрын
At work we use that for all kinds of stuff. When we cut finish grade wood we just throw some duct tape on the shoe. It works really well and it means you take up less room in the job trailer.
@tracynshea1333
@tracynshea1333 3 жыл бұрын
@Vcg construction, Finally I have a use for the rear handle! I hate that thing! After I bought the SPTH77M I never looked back! The rear handle has sat in the shop or is only used on the boat for dock builds & repair!
@HUGH_JHANIS
@HUGH_JHANIS 4 жыл бұрын
That things got a serious break on it nicely done milwaukee...! And you too vince as always.. watched your tool talkin demo like 5 times.. 🤣🤣🤣
@Diff3RentBreed
@Diff3RentBreed 4 жыл бұрын
11:12 cuz there is no battery 😂 I've done that myself more times than I want to admit, 😂🤣😂🤣😂🤣
@kingofthecrease30
@kingofthecrease30 4 жыл бұрын
no battery is needed in order for the trigger to be pulled in...he was showing the safety feature of the saw
@ThiagoRizzotto
@ThiagoRizzotto 4 жыл бұрын
kingofthecrease30 circular saws usually have a safety button close to the trigger
@therealjuliuscesar619
@therealjuliuscesar619 2 жыл бұрын
@vcgconstruction have you ever seen the m18 fuel circular saw on sale, if so what time of the year? Also, I've never seen the high output HD 8 batteries on sale either, have you'll ever seen those on a discount sale???
@hairynose656
@hairynose656 4 жыл бұрын
the 8 inch blade is nice on the metal circular saw but it doesn't cut any deeper then the Milwaukee 7 1/4 circular saw...i invested in the makita cordless cut off saw instead its better for most of what i do and so far i love it.
@kbguthriehomes2343
@kbguthriehomes2343 4 жыл бұрын
I soley have a saw just for finishing only. If i cut metal i have the Milwaukee metal saw ive got the old one as that one is not available in our country yet however ill buy it when it comes out just so i have it cause love Milwaukee and have almost everything 😂
@PETTYPOPGAMING
@PETTYPOPGAMING 4 жыл бұрын
I haven't seen any good reviews on the m12 bandsaw. Can we get one. Also maybe the deep cut m18 bandsaw
@nezarmahmoud7728
@nezarmahmoud7728 6 ай бұрын
Thanks for you and for Milwaukee
@802Garage
@802Garage 4 жыл бұрын
Wow that's a very impressive saw. Seems almost as fast as plasma cutting and that's nuts.
@VCGConstruction
@VCGConstruction 4 жыл бұрын
Definitely made to cut metal fast!!
@austincharles6
@austincharles6 3 жыл бұрын
I tried to do a 4 foot rip with the corded version and my blade was dull before I even finished. 3/16 thickness.
@masonb1100
@masonb1100 4 жыл бұрын
I bought a gen 2 Milwaukee 18 gauge straight nailer. Had it 2 days and I was working on trim work near some steps and someone walked by and kicked it down 13 steps.. It still fires and shoots normal and looks fine but should I be worried though?
@chief9989
@chief9989 4 жыл бұрын
is the guy still standing?
@AntonioClaudioMichael
@AntonioClaudioMichael 4 жыл бұрын
Happy Saturday Guys @vcgconstruction
@ulyssesmendoza989
@ulyssesmendoza989 2 жыл бұрын
Vince forgot to put the battery on. What’s the best blade to pair with the skillzaw?
@stevemata8282
@stevemata8282 4 жыл бұрын
I’m wondering if it worked after you put the battery in you didn’t say
@Wroom90
@Wroom90 4 жыл бұрын
How do you see the cutline? Look's like it is hard to aim with this tool
@watti-yi7sw
@watti-yi7sw 4 жыл бұрын
Thx4 vid Vince! Saw your comment on scratching base of worm drives. . Get in the habit of placing the saw down on its blade side. Works on any flat surface. surface. Ground deck etc. Your saw will not tip onto the base. Comes from my days of 'trac'framing with the guard pinned up. Safety thing. DON'T DO THIS. OSHA GETS EXCITED!
@VCGConstruction
@VCGConstruction 4 жыл бұрын
Thank you for the tips and feedback watti!!
@pointedspider
@pointedspider 4 жыл бұрын
I used to have a Milwaukee V28 Metal Cutting Circular Saw. 15 years ago.
@VCGConstruction
@VCGConstruction 4 жыл бұрын
Must be getting the job done if it’s been in use for 15 years!! 👍🏻
@marsbase3729
@marsbase3729 2 жыл бұрын
When you start hearing your tools talk, it might be time for a vacation 😆
@garyknable1155
@garyknable1155 4 жыл бұрын
Welcome to the over 40's club LOL What a great saw been waiting to see this
@stephenleepmg113
@stephenleepmg113 4 жыл бұрын
Morning Vince Looks like a nice tool at first glance. If you can, check out the Fein Slugger 9" The Milwaukee at first glance resemble the Slugger. When Milwaukee copied the Festool 10.5V D handle multi head cabinet drill. I am wondering if Milwaukee maybe copied Fein and added there 18V battery to it ? Thanks for the video Vince.
@VCGConstruction
@VCGConstruction 4 жыл бұрын
Thanks Stephen, I’ll see what we can work up!
@Caniksigboy
@Caniksigboy 4 жыл бұрын
Hello do your rapid charger get hot?
@oliverherron6606
@oliverherron6606 4 жыл бұрын
Prefacing I am not a professional contractor. But I feel like if your cutting metal you already have a designated metal saw. I feel like cutting metal is not something you "kind of do" you either do or you dont. Am I wrong? I dont actually know, and I'd like to know.
@jarrodbrennan121
@jarrodbrennan121 4 жыл бұрын
When i have to cut doors i always use masking tape to protect the doors finish and also tape the saw too. The doors cost between 2-8k each. Taking an extra 5 min to tape is well worth the peace of mind.
@ztej
@ztej 4 жыл бұрын
Wtf kind of doors are you cutting stained entry doors those must be cherry wood or somethin you should use a 80 or 60 tooth my best advice is to have them costumed ordered with one of the guys from the lumber yard l saves a whole hell of a lot of time and if they send the wrong size have them come pick it back up but then again the way this bs is with this corona virus everything is all fked up
@jarrodbrennan121
@jarrodbrennan121 4 жыл бұрын
@@ztej no. Aluminum doors. Some are custom special order. My saw has a 60 tooth blade.
@benjaminromshak2921
@benjaminromshak2921 4 жыл бұрын
Hikoki has a Multivolt saw that goes up against the big metal saw. Unfortunately, Metabo HPT hasn’t brought it stateside yet. Would love to see them head to head.
@jamessnapp581
@jamessnapp581 2 жыл бұрын
It probably wasn't working because of the battery being out of it. LOL Love the show man.
@krismont
@krismont 2 жыл бұрын
hilti have also one designed for metal : SCM 22-A (in europe)
@thomasmorse6692
@thomasmorse6692 4 жыл бұрын
That VCG Construction sure gets around. Even had their name on Vince's shirt!
@jasonderickson7130
@jasonderickson7130 3 жыл бұрын
I know to much work for most but if you get teflon cut to fit then drill half way through it for some washers and rivets to secure to . It will last long time and replace when it wears I just happened to have some. I'm sure there is better deals but you can get it to go around a semi trailer pin for $20
@Manhandle730
@Manhandle730 2 жыл бұрын
Dude, what?
@JustinDowDIYcentralhighway
@JustinDowDIYcentralhighway 4 жыл бұрын
Great Coverage on Circular Saws 🍻🤙
@VCGConstruction
@VCGConstruction 4 жыл бұрын
Thanks Justin, we appreciate it!
@jeffshearer5125
@jeffshearer5125 4 жыл бұрын
Been using the corded metal saw for years, been a good one. Won't be getting the cordless, to much cutting for batteries
@seasgarage
@seasgarage 4 жыл бұрын
Yeah, once they get out there and start using it, their gonna realize they cant cut all that angle and channel they were showing. Its a little different if you gotta cut a few for a home reno, but your not using this at a plant lol
@bhribik21ify
@bhribik21ify 4 жыл бұрын
Great video brother!!!!! I have to cut a lot of unistrut and allthread during my work day. Think this would make life a little easier. Right now I just use a Sawzall or a grinder. Every time I watch one of your videos y'all have me wanting to spend money 😂 lol. My wife probably doesn't like you hahahaha..... again great video and keep up the good work!!! Great TTR last night to BTW!!!
@rjeefamily926
@rjeefamily926 4 жыл бұрын
What are some applications which would render a metal circular saw relevant? Why would you get a metal cutting circular saw when you could just use a handheld band-saw?
@Manhandle730
@Manhandle730 2 жыл бұрын
Long cuts. Say, across 1/4” thick 4’x 6’ sheet metal. No handheld bandsaw is going to cut that in half. There’s a limited depth for a bandsaw.
@7thfloorisnomoreq790
@7thfloorisnomoreq790 4 жыл бұрын
Never would have thought about scratching the base. Would found out after I ruined an piece of trim
@MrEricld1
@MrEricld1 4 жыл бұрын
Awesome. Wonder how it does on ductile pipe. 🤔
@VCGConstruction
@VCGConstruction 4 жыл бұрын
I’d expect it might do okay!!
@regcav87
@regcav87 4 жыл бұрын
What work drive circular saw would you recommend that isn't going to break the bank? Just a weekend wood worker
@VCGConstruction
@VCGConstruction 4 жыл бұрын
Corded SkilSaw
@nuclearexplosion5841
@nuclearexplosion5841 4 жыл бұрын
I have some threaded rod ("all thread") to cut just send it over to me and I'll test it out for you 🤣🤣🤣
@micjubba709
@micjubba709 4 жыл бұрын
Convert to abrasive disc off a stihl saw 410 off you go lol
@danmatelsky6064
@danmatelsky6064 3 жыл бұрын
How could there be casino chips produced by this saw ? Is this a hint to a coming saw that weill produce casino chips ? And, of what value ? Looking forward to THIS SAW !
@aDanishDude
@aDanishDude 4 жыл бұрын
Nearly every jobsite i've been at recently you need to set up an area to use an angle grinder, and you need a "hot-work" card to prove you know the dangers. That's why sawzalls, circular saws end up on metal cutting duty because they don't produce sparks (or at least not the same amount as the angle grinder.)
@shawnbuonarosa3188
@shawnbuonarosa3188 4 жыл бұрын
You goof, no battery in it when you were trying it with the guard off hah.
@t.ezanditrinanda1368
@t.ezanditrinanda1368 4 жыл бұрын
About to say the same thing
@liamhollestelle3531
@liamhollestelle3531 4 жыл бұрын
Dude is spot on!
@pointedspider
@pointedspider 4 жыл бұрын
Facepalm!
@ccadama
@ccadama 4 жыл бұрын
Vince forgot his performance enhancing drug of choice: COFFEE!!!. Have you some coffee please. Then try again. Everyone stay safe and well.
@kingofthecrease30
@kingofthecrease30 4 жыл бұрын
you dont need a battery in order for the trigger to pull in...he was trying to show how the safety works on the saw....does not matter if a battery was in place
@1098zo
@1098zo 2 жыл бұрын
Battery my guy! The battery wasn't in the tool, that why it wouldn't run with the cover off 😉 great tool, looking to pick one up. Thanks for all the great videos.
@AntonioClaudioMichael
@AntonioClaudioMichael 4 жыл бұрын
Love the Milwaukee leather gloves vince @vcgconstruction
@paulmazurek3608
@paulmazurek3608 4 жыл бұрын
Excellent demo video 👍 I erect metal buildings last one 100,000 sq foot this saw works ,
@asianmikedesigns
@asianmikedesigns 3 жыл бұрын
thought i was going to learn something new about circular saws upon stumbling into a promo for milwaukee (vcg secret sponsor). i absolutely agree with not taking my everyday saw & using it to make some metal cuts & wouldve have done the same in going to one of my old to accomplish the task. im not sure how the quality of the batter makes the difference in 6-8AH battery tho, must be a redfuel thing.
@markvladuchick2318
@markvladuchick2318 4 жыл бұрын
Vince is so extra lay off the coffee 😂😂
@VCGConstruction
@VCGConstruction 4 жыл бұрын
No stopping the coffee!
@TravisClaytonAudio
@TravisClaytonAudio 2 жыл бұрын
Going thru old videos for fun n boredom right at end with the bolt cutting to see if burr free you called the nut a bolt 😅 can’t even tell ya how many times I swear that I or my buddies have always mixed up the names when talking to one another about it thankfully we all know what the hell we meant lol.
@duin2in
@duin2in 4 жыл бұрын
That Milwaukee metal circ ssw looks badass
@taylortowles5169
@taylortowles5169 3 жыл бұрын
I use a corded version at work. We cut mack truck frames with it.
@calebgoins1
@calebgoins1 4 жыл бұрын
They all work together
@liboriohernandez1053
@liboriohernandez1053 4 жыл бұрын
I love it 💪
@K0NVICTx
@K0NVICTx 4 жыл бұрын
I dropped phone and accidentally skipped to where the motor, cpu and batteries talking to each other. Apparently one of them speaks spanish too? I made sure to start video over again, to ensure quarantine hasnt made Vince lose his got dayum mind. 🤪
@VCGConstruction
@VCGConstruction 4 жыл бұрын
🤣🤣👍🏻
@shadowstorm7
@shadowstorm7 4 жыл бұрын
I would've thought at least on would speak Chinese! lol Also Vince sounded like he should be talking smack in a wrestling ring.
@noebuentello6192
@noebuentello6192 4 жыл бұрын
My guess is maybe the battery makes the tool too lopsided and makes it more difficult to make straight cuts. Or they can just get away with it and are saving money
@AntonioClaudioMichael
@AntonioClaudioMichael 4 жыл бұрын
Sweet a Milwaukee metal cutting saw @vcgconstruction
@AntonioClaudioMichael
@AntonioClaudioMichael 4 жыл бұрын
To bad the Milwaukee metal cutting 8 inch saw isn't a left facing blade saw @vcgconstruction
@andrewschafer8986
@andrewschafer8986 4 жыл бұрын
A roll of blue tape prevents my saw table from getting scratched and from making scratches. Could be a good saw for union or metal guys. If it doesn’t make daw dust I sub it out.
@micjubba709
@micjubba709 4 жыл бұрын
I was thinking same things before even watched this video lol cut some nice bricks kitchen tiles rebar rods and concrete slabs ha not thier intended use aswell might invalidate the warranty if do that aswell as putting self at risks
@upcontryjunk
@upcontryjunk 4 жыл бұрын
how could you test a saw to see if it works with the cover off when the battery wasn't installed, just saying
@nickhouze8849
@nickhouze8849 3 жыл бұрын
I'm Just a diesel mechanic with interest in carpentry that is ready to build something haha I've done some builds though,next is kitchen island
@matsudakodo
@matsudakodo 2 жыл бұрын
Can you put teflon feet on the bottom like a computer mouse? Seems like that would solve the issue of scratching.
@DjJoeEmeric
@DjJoeEmeric 2 жыл бұрын
This man is craaaazyyy :))))) big like !
@stevenb_4202
@stevenb_4202 2 жыл бұрын
Who else realized he said it didn’t work but yet he ain’t have the battery in😂💀💀 11:10
@raymondromero4558
@raymondromero4558 Ай бұрын
I wonder if Milwaukee will ever make a battery power jaws of life tool 😊
@JimmyVegas317
@JimmyVegas317 4 жыл бұрын
Great channel m8 keep it up
@VCGConstruction
@VCGConstruction 4 жыл бұрын
Thanks Jimmy!
@rafaelmarin1963
@rafaelmarin1963 4 жыл бұрын
The right tool for the right job.
@scottybrav
@scottybrav 4 жыл бұрын
My guy just learned “relegate” but doesn’t quite know what it means lol
@matejmazur191
@matejmazur191 3 жыл бұрын
Haha exactly what I was thinking. xD Great channel tho...
@avancalledrupert5130
@avancalledrupert5130 3 жыл бұрын
He meant designate.
@aaronnewman6744
@aaronnewman6744 3 жыл бұрын
Ted lasso? Lmao
@harrison298
@harrison298 3 жыл бұрын
He used the word exactly right.
@howiefeltersnatch2596
@howiefeltersnatch2596 3 жыл бұрын
Relegate, consign or dismiss to inferior rank or position, for example, taking your good wood cutting saw and cutting metal with it, a dirty task that's not good for your saw, a lesser task, an inferior rank. He used the word exactly how it should be used. Don't be a dipshit.
@davidpatino4486
@davidpatino4486 4 жыл бұрын
Deal I found and wanted to share.
@kingofthecrease30
@kingofthecrease30 4 жыл бұрын
CONGRATS TO VCG ON 228,000 SUBSCRIBERS !!! 👍👍
@VCGConstruction
@VCGConstruction 4 жыл бұрын
Thanks Cuz, we appreciate it!!
@CyberCuban
@CyberCuban 2 жыл бұрын
You lost me there!! “Cutting molding with a circular saw” lol
@cattv5063
@cattv5063 4 жыл бұрын
I wish I have one cat they are so cute aww and the video was funny!~
@blade_monstababy9945
@blade_monstababy9945 2 жыл бұрын
How about installing the battery donkey?
@cjlong2057
@cjlong2057 4 жыл бұрын
Oh my God my uncle grinds my gears in a PG sense he never lets the blade come up to speed he just pushed every saw right in and you can hear the engines struggling he's pushing so hard. he's burned up more saws then I can count. Our multi purpose saw is spewing out grease already and it's only a month or so old. Kinda off topic but he does this with circular saws most and they almost sling right out his hands
@ucitymetalhead
@ucitymetalhead 4 жыл бұрын
Honestly that's good advice i can say I didn't think about that though I hardly ever use a circ saw.
@cjlong2057
@cjlong2057 4 жыл бұрын
@@ucitymetalhead with any power tool always do those 2 things don't force the blades and let them come up to speed which takes legit only a second or two and you can make even the cheapest of tools last you I had the harbor freightjig saw for 4 years I used it pretty regularly mice got to the cord one night or I'm sure I'd still have it. Always check your blades make sure their good still take care of your tools and they'll take care of you.
@matthewwilliams6596
@matthewwilliams6596 4 жыл бұрын
If you cut metal, just get a evolution saw and if you cut sheet metal sometimes, just cut it with a carbide tipped blade
@BigdaddiZ
@BigdaddiZ 3 жыл бұрын
Watch the whole video and just realized I NEVER cut metal. But now I want to
@justinlopez7426
@justinlopez7426 2 жыл бұрын
Anybody know why my Milwaukee fuel saw stops rotating all of the sudden? Just rotates once and stops??
@justinlopez7426
@justinlopez7426 2 жыл бұрын
And it’s new
@billmahy1948
@billmahy1948 4 жыл бұрын
Its works with the battery installed
@marcogarcia4696
@marcogarcia4696 4 жыл бұрын
Dude going down one day as the One of the Greatest ..awesome video bro
@CG-zz4nd
@CG-zz4nd 4 жыл бұрын
the 8Ah battery will give you more runtime compared to the 6Ah battery. The higher the Ah battery the longer the runtime. The quality of the battery has alittle affect on runtime, but still comes down to capacity of the battery. This is the same for the Radio Control Car industry.
@chichidouglas5078
@chichidouglas5078 2 жыл бұрын
I was wondering what the hell you were talking about until the commercial started. Because I've been a carpenter for 30 years and most of the time I have a few saws for different materials. I'll use a different saw for concrete set up and for cutting Hardie plank so I don't have to change blades for cutting trim and the dust turns into slurry in the rain and it rains alot here. But there's been times when I only had one saw because one fell off a roof or someone cut the cord off ect and also when I started out I only had one saw to use and I never had a problem using one saw for framing, metal siding/roofing, Hardie plank, or concrete set up including cutting rebar with a cut off blade if I had too.
@502deth
@502deth 4 жыл бұрын
lmao. maybe the battery is not in? thanks for the laugh.
@scottkailey1
@scottkailey1 4 жыл бұрын
I love this guy he is so entertaining!
@WeldingForJesus
@WeldingForJesus 4 жыл бұрын
Vince is the king!
@mannyfestoINS
@mannyfestoINS 4 жыл бұрын
He’s become much more comfortable talking while doing stuff. He used to get easily distracted and was a bit all over the place. Still always been great vids
@georges5233
@georges5233 4 жыл бұрын
Haha ur funny dude. I’m starting out learning about tools. Never cut a piece of wood in my life! This feels like a great channel to follow to get me learnt 😁
@VCGConstruction
@VCGConstruction 4 жыл бұрын
Welcome aboard!
@WeldingForJesus
@WeldingForJesus 4 жыл бұрын
Welcome! I cut preciously little wood, I'm more into metal, but that is what is fun with VCG and the gang: we all do our own thing but still have alot of fun together.
Milwaukee's Impressive New Saw - M18 Fuel 6-1/2" Circular Saw
12:54
Tinker With Tools
Рет қаралды 7 М.
Heartwarming Unity at School Event #shorts
00:19
Fabiosa Stories
Рет қаралды 25 МЛН
Как бесплатно замутить iphone 15 pro max
00:59
ЖЕЛЕЗНЫЙ КОРОЛЬ
Рет қаралды 8 МЛН
Double Stacked Pizza @Lionfield @ChefRush
00:33
albert_cancook
Рет қаралды 120 МЛН
85% of People Get this Wrong Cutting with a Circular Saw
3:24
The Funny Carpenter
Рет қаралды 3,3 МЛН
MILWAUKEE® Mitre Saws - 5 things you may not know
7:15
Milwaukee Tool EU
Рет қаралды 4,2 М.
These Circular Saw Blades HAD ME FOOLED!
21:24
VCG Construction
Рет қаралды 789 М.
The 3 Circular Saw Tips Every Beginner Should Know!
5:56
The Funny Carpenter
Рет қаралды 170 М.
99% of Beginners Don't Know the Basics of Router Bits
22:13
731 Woodworks
Рет қаралды 741 М.