STOP ENGRAVING YOUR TOOLS! Start Etching Them With The Ullman Metal Marker

  Рет қаралды 47,956

Koon Trucking

Koon Trucking

Күн бұрын

Пікірлер: 57
@dennistrujillo4521
@dennistrujillo4521 4 жыл бұрын
Chris fix has a video on how do this without the expensive machine
@sophiasocal68
@sophiasocal68 Жыл бұрын
I'm using Chris Fix's technique on my tools. Using a battery charger that is used to jump start combines- should do the trick!!
@anthonythompson4110
@anthonythompson4110 4 жыл бұрын
I'm guessing the arts and crafty people could get a lot of use out of that too
@prevost8686
@prevost8686 4 жыл бұрын
It’s interesting but I’ve been using an engraver for so long. The engraving is sloppy but it’s quick and there to stay. I’ve have knives and other high wear items that lost the factory etching on the over time.
@larryborkstrom3580
@larryborkstrom3580 4 жыл бұрын
Glad you got in spot where you and Bill won't rip each other off there some places I had to lock box when it leave my sight
@_P0tat07_
@_P0tat07_ 4 жыл бұрын
Just wondering how long it will last though. Looks like it could be prone to abrasion. Keep us updated with long term durability
@danohstoolbox
@danohstoolbox 4 жыл бұрын
Looks like a potential side gig how much for the fluids
@KoonTrucking
@KoonTrucking 4 жыл бұрын
I’m not sure. It can’t be much
@markarmstrong3394
@markarmstrong3394 4 жыл бұрын
Thanks Clay !!
@jonny777bike
@jonny777bike 2 жыл бұрын
I guess the only way engraver could be better is if it could be done via a cnc machine. Although cnc engraving a wrench could be difficult unless you can get a really flat surface.
@BuiltOverBot
@BuiltOverBot 4 жыл бұрын
I think most people think this is like a quick laser etch this is using edm and should go deeper then they do with laser. In a pinch if you spray a tool with salt water it should work for the fluid they use if my memory is correct.
@johnnyramirez9082
@johnnyramirez9082 4 жыл бұрын
Looks good. Very nice logo
@butler386
@butler386 4 жыл бұрын
Hmm. thinking of changing my name to yours. Thanks for the tip.
@coreysuttles1362
@coreysuttles1362 4 жыл бұрын
Pretty nifty tool
@PaganWizard
@PaganWizard 4 жыл бұрын
Hope you guys were safe from the recent tornado that ripped through that area. Does marking your tools with that machine have any impact on the tools warranty?? I bet you wished you had this when Wally was working there.
@KoonTrucking
@KoonTrucking 4 жыл бұрын
No it Doesn’t hurt warranty. It didn’t do anything but rain a lot here we got lucky
@PaganWizard
@PaganWizard 4 жыл бұрын
@@KoonTrucking Glad you're all safe!!!
@charlesabbott5563
@charlesabbott5563 4 жыл бұрын
Mr. Clay, Great video I was wondering how good it worked. Y'all be safe.
@davidwalle5025
@davidwalle5025 4 жыл бұрын
Good video and review
@danohstoolbox
@danohstoolbox 4 жыл бұрын
Looks interesting
@danohstoolbox
@danohstoolbox 4 жыл бұрын
@@cooter.malone hello cooter how is things with you
@danohstoolbox
@danohstoolbox 4 жыл бұрын
@@cooter.malone it going ok it's not as bad as the city the shit tickets are still available LoL but each day is different LoL We have had a few stores run right out of meet but they get restocked
@gregcothrum4045
@gregcothrum4045 4 жыл бұрын
Good video have a great one and stay safe 👍
@DIGGER19860
@DIGGER19860 4 жыл бұрын
It probably wont rust either like engraving does some times.
@nr3rful
@nr3rful 4 жыл бұрын
How 'bout a curve surface such as a socket?
@KoonTrucking
@KoonTrucking 4 жыл бұрын
Yep just have to roll it
@zinn3243
@zinn3243 Жыл бұрын
Any chance we can get the exact material that stencil was made out of, or link to a video showing us how to make one?
@coyotecustoms1316
@coyotecustoms1316 4 жыл бұрын
thanks i have been thinking about this since it came out but the adds and reviews dont say any thing medical warnings(i got a defib in my chest)found out from mr o. from south main auto that i cant use a minni-ductor cuz of the defib. love to know if it has any warningss on it,thats and please keep the vids coming.
@apennameandthata2017
@apennameandthata2017 19 күн бұрын
so, how do you write letters?
@1291ffemt
@1291ffemt 4 жыл бұрын
Hey Mr. Clay, I don't think Wild Bill would mind if you got me one of his beautiful green swivel head ratchets. Lol jk. Great video!!
@jasonn2284
@jasonn2284 4 жыл бұрын
Cool I’ll buy it if it’s less than $100
@TheTheomax
@TheTheomax 4 жыл бұрын
By far a better Idea then taking a engraver or a grinder to some expensive tools.
@mjmjersey
@mjmjersey 3 жыл бұрын
Is it etched deep enough to keep them from painting over
@KoonTrucking
@KoonTrucking 3 жыл бұрын
No it isn’t very deep
@tacovids
@tacovids 6 ай бұрын
how can i mark this tool then
@spencedeezenuts6357
@spencedeezenuts6357 4 жыл бұрын
Can you etch sockets with this or other tools that don’t have a flat surface ?
@KoonTrucking
@KoonTrucking 4 жыл бұрын
Yes you can roll it on there be best to use the plate or attach ground wire directly to it
@chittychad18
@chittychad18 2 жыл бұрын
Electrolytes… its what the plants crave
@jaimeramirez3685
@jaimeramirez3685 2 жыл бұрын
Will this work on plastic, I want to use this on my dewalt tools and batteries all my electrical tools etc ?
@KoonTrucking
@KoonTrucking 2 жыл бұрын
Nope it has to conduct to make it work
@dougbish5533
@dougbish5533 Жыл бұрын
So it's just a handheld chemical etcher. But it comes with stencils lol.
@xxx_rude_dogg_xxx9806
@xxx_rude_dogg_xxx9806 Жыл бұрын
GAR-BIDGE!
@dustinkinard4032
@dustinkinard4032 4 жыл бұрын
That’s cool but I don’t think I could do that to a snap on tool, that would be like carving a gold Rolex watch haha
@KoonTrucking
@KoonTrucking 4 жыл бұрын
It’s a tool? Most of mine were engraved until I got this so now everybody gets a stamp. Just theft detent
@carloscarney8471
@carloscarney8471 3 жыл бұрын
Well if you don’t do it to your snap on tools someone who steals or borrow your tool will put their name on it! Seen it happen to my tool!!
@robs1873
@robs1873 2 жыл бұрын
You scotch tape the stencil?? 😂
@jimhaines8370
@jimhaines8370 4 жыл бұрын
The PEACE sign is the Footprint of the American Chicken HA!!!
@MrBaseballfl28
@MrBaseballfl28 3 жыл бұрын
Do you still recommend it? How has it been working? @koontrucking
@KoonTrucking
@KoonTrucking 3 жыл бұрын
I engraved a bunch of stuff and haven’t used it since then but the engraving last really well or ai should say etchings last
@KoonTrucking
@KoonTrucking 3 жыл бұрын
It is pretty aggravating to get set up right but once you have it it’s easy to use
@MrBaseballfl28
@MrBaseballfl28 3 жыл бұрын
Thank you for responding Clay. Appreciate the feedback. Love your channel
@azael831
@azael831 4 жыл бұрын
Some 3M green fiber and bye bye etching
@KoonTrucking
@KoonTrucking 4 жыл бұрын
A grinder will remove engravings so a thief will do what they will but this just looks better than engraving but it’s pretty deep in the chrome playing so I would imagine you would have to run through it
@epicragegaming2016
@epicragegaming2016 4 жыл бұрын
4:34 thats a really rotten banana.
@charlestackett7137
@charlestackett7137 4 жыл бұрын
It's only for guys? What about women?
@おいmizuno
@おいmizuno 5 ай бұрын
Don't waste your money and time with this video and tool
@anarmyofjuan7334
@anarmyofjuan7334 10 ай бұрын
Too much to mix hold this 5seconds buy this n that just too many variables to do. Just use an engraver draw your initials and end of story... No mixing no pumping. Folks just keep it simple. No-go on this tool 😅😅😅😅
How to Metal Etch Your Tools
9:09
ChrisFix
Рет қаралды 3,8 МЛН
Snap On Dealer Puts ICON Head To Head VS Snap On Ratchet
13:05
Koon Trucking
Рет қаралды 255 М.
Logo Matching Challenge with Alfredo Larin Family! 👍
00:36
BigSchool
Рет қаралды 21 МЛН
Ik Heb Aardbeien Gemaakt Van Kip🍓🐔😋
00:41
Cool Tool SHORTS Netherlands
Рет қаралды 7 МЛН
CHOCKY MILK.. 🤣 #shorts
00:20
Savage Vlogs
Рет қаралды 29 МЛН
I'm Excited To see If Kelly Can Meet This Challenge!
00:16
Mini Katana
Рет қаралды 36 МЛН
I regret not having learned this secret at age 50! I would die without knowing
33:46
Dremel vs. Burgess Engraver Review & Comparison
13:10
Catus Maximus
Рет қаралды 10 М.
When to Buy and How to Mark Your Tools
7:56
Adam Savage’s Tested
Рет қаралды 186 М.
How to Paint Your Firearm: Using Brownells Aluma-Hyde II
12:57
Brownells, Inc.
Рет қаралды 55 М.
20 Laser Engraving Blanks From TEMU and How to Price Your Work
22:29
Laser Engraving 911
Рет қаралды 171 М.
How Deadly Is A 22 Pistol? 22 Pistol vs Human
17:04
Garand Thumb
Рет қаралды 7 МЛН
Tools, Glorious Tools! #8 - Learning To Engrave
12:13
Clickspring
Рет қаралды 147 М.
Мама забыла меня в багажнике Теслы
0:31
Даша Боровик
Рет қаралды 1,4 МЛН
Мама забыла меня в багажнике Теслы
0:31
Даша Боровик
Рет қаралды 1,4 МЛН
ДРИФТ НА ВОЛГЕ
0:59
LavrenSem
Рет қаралды 282 М.