Tip: Turn off symmetry when adding rudders, otherwise the duplicated one will be reversed.

Thanks so much for making these. The game is great but that is also definitely in part due to great video tutorials like these. Cheers!

At 7:00 you forgot to tell to set in the compact pilot seat control menu the Axis 2 control menu (for the W and S key) the clutch control mode from 'reset' to 'sticky', else you need to press the W key continous to keep the clutch operational.

Nice you remake the vid now the game if Official, now its even better!

Wow, this and the last video were SUPER helpful for me. Thank you so much for the support! I love learning about complex engineered models.

Thanks! After watching these (and staying up til 1am on a school night) I think I finally get stormworks! (Barely)

I’m torn with these tutorials This video is helpful and teaches you a lot about the things mentioned in the video. However I’ve noticed that after ‘basic boat/controls build, like rudders etc. the tutorials stop. I’m currently stuck on a compact robotic pivot. I know how they work, but connecting the logic on the data tab is near impossible. Because I’m given no indication where to connect it. Honestly, I’m surprised individual 3-5 minute tutorials about each component aren’t a thing. Because once you have mastered hooking up an engine or setting up rudders etc. you get no help if you get stuck. Because there are no tutorials posted that aren’t about those basic functions. After 5 months I doubt you’re reading comments, but Jersey, if you’re seeing this. Please do individual tutorials for individual components. Even if setting them up is exactly the same. I’m new to this stuff, and I’m currently trying to practice on an outdated creation that’s been discontinued by re-vamping it. In my case, existing robotic pivots go into specifically named nodes. But I don’t know what block or item that node represents. I just want to press a button, and have the pivot open a hidden door next to it. Apart from electrical (which I’ve already done) the data nodes are green for the button and pink for the pivot, so I can’t connect them together. My struggle is, I haven’t found a single video that explains what this thing is that the nodes seemingly go into (when you’re on the logic section, the description of the block disappears and only shows the nodes it has). So please. If jersey or anyone sees this, help me out by making a video on each individual component even if it’s a couple minutes long. I guarantee you will be the first to do so, and it will be popular in terms of views because I doubt I’m the only one struggling past the ‘basic logic functions’ stage

Thank you so much i was getting tired of using workshop boats and wanted to make my own this is very simple and easy thank you!

my starter won't work. I've followed your directions perfectly and double checked it but When I release it after a few seconds it just doesn't start.

Thank you!!!! This really helped me make my first moving ship

this is my second time watching this video because the first ship i made there was a 50/50 chance of making in go but now is perfect thank you

Are you going to be making any advanced tutorials? These tutorials really helped me get off the ground, but I cant seem to get any of the advanced things down.

0:43 YASSSSSS, LET'S DO IT...LET'S CONTROL THIS CROATIAN AND INJUN!!!!! oh, Nevermind...I misheard.

Ima watch all these before ei start playing stormworks just in case

Its a amazing productive day you do great job! Sorry for my English. Im from russia

very very informative and a big thank you for the educational videos!

Thank you for the tutorial, but the logic section is confusing me. I keep trying to connect things to the engine, such as starter button and throttle, but it won't let me. Has something changed since this video was made?

But how do you connect multiple fuel tanks to one dial?

I am stuck because I have no electricity to run anything with but I can't figure out how to link anything up.

thx i was lost how to set it up but now i know thx

Thanks for making this, it helped a lot

Thanks for this

Love the videos, but no clue how to refill things like fuel tanks. Maybe another video idea? Repair, restock, items, etc? Also things like what gear radio is best, # of motors per prop / weight. Least general guidelines. Like X tons = X props / power. Oh and how to refine? Or get more fuel?

This is very helpful! by the way i am downloading stormworks very soon, so this was very hepful for me!

Good vid!

Thank you mrnjersey for this it helped me and my friend

U know the starter for me is just that i need to hold the bottun and when i dont hold it anymore the engine just stops like nothing happend

I did everything correctly but my boat just kept going backwards and I also have some probs with the clutch it just won't go

thanks!

The engine runs fine and everything is connected but as soon as I press the clutch the engine stalls.

Very good tutorial!

W TUTORIAL

Your tutorials are amazing. Very Clear and simple to understand. Thanks a lot!

THANK YOU!

Thanks Man

How to change a logics? Electric change to power?

Super helpful :)

This is so cool

Thank you!! Is there any chance of an upcoming remote controlled boat tutorial please? 😄

Is this Like the 8th video today? Edit - its actualy the 12th

For whatever reason my engine just makes a clicking noise when its on. It's powered and the boat is moving but it makes a clicking noise so I must be doing something wrong.

My creations never start, the engines start spinning when I press on the starter but when I let go it just stops again

everything is working properly the, props spinning, engines running, clutch and all that is working it’s just the boat literally won’t move.

A question how do multiple engines like 16 giant engines ?

Modular engine tutorial please!

My engine wont start

Sadly when i do exactly What you do the exost dose not word So i never had a working boat):

why does my engine stop running after i let go of the start?

How to change color of that selection of the right side and top?

Why when I change the throttle from 11 to 13 it goes from 20 to 0

Please, add a video to describe the build and all logic of a starter rhib...

so I'm currently doing classic career, could you tell me where i find that gearbox to research, or an alternative too it?

HOW DO YOU GIVE PEOPLE PERMS FOR WORK BENCH

its a good tutorial but how come whenever i use the ignition, i have to hold it for the engine to stay on?

When I try to start its it dosent start and i have throttle on and also buttons help me

What is the green logic

Anyone know how would i make it so pressing W increases the throttle and the clutch

So I've connected my push button to starter but I'm still getting editor warnings and testing it doesn't work. What am I doing wrong?

Well i put everything together right... And it doesn't work. Engine lurches forward and then bogs down and basically stops.

The modular engines are now in experimental

my one sunk

Ah yes i love granules of throttle

i'd love to know how you made the boat in the intro, is it on the steam workshop at all?

my rps won't stay up even if i put the throttle up

i need some help i did everything he did besides im doing to engines and it starts but i cant get the clutch to work

I'm having some problems with moving my boat. it seems every time I start the boat, it goes right up to 20 RPM and it does not drop! It stays at 20 RPM. When I decrease the throttle, it goes down too far. And moving the ship forward will kill the engine. I don't know what I did wrong. Please help.

My starter turns on my propellers?

Can you help me please,as soon as I entered the game for the first time there's this flying fishes who keep flying into me they doesn't do any damage but it just so annoying they keep destroying my boat making it hard for me to complete my mission..help me please????????I paid for the game and I can't let my money go to waste

Daan Bos me the other way around XD

Help, I’m building a boat and I connect buttons to start engines and it’s glitched or something where I can’t press the,m

doesent work no moe :(

I tried following this exactly, only difference is I used a medium engine and about 4 propellers. My problem is, I cant get the propellers to move. My engine starts fine, but holding W does nothing. If i increase the lever too much the engine explodes, I made sure W/S was connected through logic. anyone got an idea?

modular engines are out

The amount of smoke coming out my build is concerning , how do i prevent this ?

My boat works but it moves extremely slow

Hey NJersey, the missions are broken in the new update. Will you fix them? Maybe like make the earlier editor an option?

i was the second to like the vid and first commend XD

How do I keep my engine from over heating?

how do i crouch

what about batteries?!?!?!

IT. DOESNT. WORK. EVERYTHING SAYS "missing power" BUT THERES NO WAY TO CONNECT POWER >:(

well how do I remove node/connection when I inevitably fuck up because Ctrl + z doesn't work. Every time I make a mistake I have to load a save

I found many bugs with the new update nothing big but funny

DIDNT WORK😓😓😞😞

I just did all this and may have blew the engine...

yay im fourth!

Complicated i will never be a ship builer

Whithout you i would not play this game

It doesn’t work

it did not work never mind it work