@jamesbaylis9438 Жыл бұрын
Nothing's better to start a Friday with a bit of Carnage. Great to see you had Fun and she sure sounded sweet at full tilt. 🥳
@tomofthejungle9991 Жыл бұрын
Great work Scotty. Burnout sounded great, love that you didn't just bang it off the limiter the whole time like every other hillbilly does these days, great throttle and car control. I bet it was a blast!
@brucerichards9102 Жыл бұрын
Great to see the amount of fun that can be had on a reasonable budget. Good work Scotty.
@falconpowerful2362 Жыл бұрын
Great work as always, mate. I reckon a Burnout-On-A-Budget build would be pretty cool, too. 🤘😎🤘
@martyburgess341 Жыл бұрын
Wow! Can only imagine what the 4.2 will do to a few sets of tires! 😯
@johnyoung4467 Жыл бұрын
3800 is an Aussie icon. LS/Barra have been done to death. Love seeing what Scottie is doing with the VN!
@351clevelandmodifiedmotor4 Жыл бұрын
VN very nothing
@brushitoff503 Жыл бұрын
Awesome stuff Scotty! Still looked like a heap of fun & you didn't destroy Supermang! Sounds great on full song!
@OVERKILL_EVERYTHING Жыл бұрын
Absolutely you need a burnout car Scotty 👌🏻 but please..... Please don't use a LS, Holden 308 / 355 in the old Torana that you got a while ago, or a angry 318 in Chrysler sigma, or AU Tickford windsor in Cortina. Something all Aussie built for a top Aussie bloke to compete in the best Aussie sport 🇦🇺🇦🇺🇦🇺
@justintunstall370 Жыл бұрын
Absolutely mint day was awesome to meet scotty and the street machine crew
@AtreidaeChibiko Жыл бұрын
Ah yes. The VN 1 series coolant pipe fix. Fun fact for those that didn't have a VN as a kid. The 3.8 was originally transverse mounted in the car it came from (a Buick) and the VN was originally going to have the RB30 in it. The Aussie dollar went up hard against the yen so they RB30 became to expensive. So Holden had to quickly change engine for the VN only 18 months before it's release. The series 1 and 1.5 were both plauged with cooling issues due to these quick fixes to make the engine fit
@hayden6056 Жыл бұрын
Yep and then for ten years with the supercharged motor they never moved the thermostat from front wheel drive position like they did on all the na v6's.
@blownvnv6637 Жыл бұрын
It wasn't that bad, once you got the initial burp of air out the cooling systems ran fine. Had a VN s1 for many years and actually found it to be very reliable.
@blownvnv6637 Жыл бұрын
@ Hayden, There really wasn't much room to fit a thermostat at the front of the LIM on the L67 when North - South. If they did it would have had to come out right under the snout between serpentine belts. If you get the bleed procedure right, bleeding the L67 isn't that difficult, you just need a screw driver and a little patience.
@hayden6056 Жыл бұрын
@@blownvnv6637 if they redesigned the lim with an extension from under the throttle body it'd make life much easier. It wouldn't have been hard to design one with a different thermostat placement. I've seen aftermarket Lim's going to m112 or m122 in other places. The screw driver method does work but honestly I like to gravity feed and burp them. 2 litre air tight container out the radiator with a couple small holes drilled through the thermostat is my go usual go to on any of the V6 charged or not.
@DodgyBrothersEngineering Жыл бұрын
There was a Commodore that didn't have cooling issues? Not sure how many times my brother has fixed head gaskets, hoses and radiators in the years he has owned them.
@rosspane4542 Жыл бұрын
Awesome job guys , went out & had fun that's what it's all about , & the old Supermang did well , she was never really setup to do that so I think we can forgive her 👍👍👍🇦🇺
@geofflasscock6970 Жыл бұрын
More Whining than the Greens party
@troypostie1252 Жыл бұрын
Lmfao great comment dude👍🤠👍
@boingkster Жыл бұрын
Ah, just the right thing for finishing night shift. Keep up the awesome work guys!!
@b_for_brett Жыл бұрын
Those drone shots 👍 Good job Scotty!
@joyjones9574 Жыл бұрын
Was great seeing you out there ..... thanks for the chat and photo at the fence while you were waiting to go out to 🙂
@STREETMACHINETV Жыл бұрын
Thanks for coming and saying g'day
@Eccentricplum Жыл бұрын
Front bull bar reminds me of those flimsy old railings to hold onto when walking down the ladder steps of an 80s swimming pool
@gavinb9627 Жыл бұрын
No walls were harmed in filming this event. The car has emerged fairly intact, you have demonstrated just how tough this is on a car too And Scotty had a blast, this are well in the world
@nathanielbarbeau4821 Жыл бұрын
As a kid I always wanted to see this V6 supercharged in a RWD application. We had the Camaro, but it already had a V8. I always enjoy these Supermang videos! The supercharged V6 is better than I could’ve imagined as a kid.
@STREETMACHINETV Жыл бұрын
They're a good little engine that GM USA misused in FWD cars
@nathanielbarbeau4821 Жыл бұрын
@@STREETMACHINETV haha! Exactly. GM USA misused many many many things for decades.
@scottiheadsa1709 Жыл бұрын
Well done scotty , solid as 15 years and hooked again, full send
@nessie42786 Жыл бұрын
It does make all the right sounds. 👍
@honestpat7789 Жыл бұрын
Wasn’t sure if that was Scotty, or Gary Myers’s out there, but geez, the mang can definitely handle a pounding (except for the hose 😂).
@brettwatson-will3388 Жыл бұрын
Mang on Scotty... The old girl does a pretty good burnout 💨
@gmhvx6 Жыл бұрын
Well done Scotty, been 15 years and still went full send. You should build an AU skidder 😂😂😂
@burnoutkings183 Жыл бұрын
Holden all the way
@johnny-pi1hi Жыл бұрын
This was great to see another sport well done for getting out there was great to see the sport done right and not on the streets
@nooki1102 Жыл бұрын
The old vn rips.. it was impressive smoke for the little v6. Well done
@scotthunter1639 Жыл бұрын
Sounded bloody fantastic Scotty.. Never too old brutha to have skid mate good job 👌
@denniskladaric881 Жыл бұрын
Well done Scotty you did great 👍
@STREETMACHINETV Жыл бұрын
Thank you
@hillbilly2224 Жыл бұрын
Yes a dedicated burnout car 🤙🤙🍻
@jc7654 Жыл бұрын
great job Scotty, having a blowout with a blowout , stress factor sorted. 😁👍
@renogkus4478 Жыл бұрын
Scotty you done awesome with the skids super mang pumps out a fair bit of smoke for a v6 definitely got to see more in the future
@mattangrave8478 Жыл бұрын
Good effort mate bad luck in that one... Should've done the old vaso on the quarter panels before your skid. Appreciate the red bonnet that was driving me around the twist.. c'mon 10s
@almstlegalgarage Жыл бұрын
Massive yes for dedicated burnout car for the channel!
@aussiebevo103 Жыл бұрын
Good to see you had a mad time Scotty. Shame a couple of things didn't go to plan but that's cars I guess. But it was all about the fun and there was plenty of it had and yes definitely build a skid rig
@qshank2752 Жыл бұрын
That VG val is off its chops. good to see some mopar stuff in ausland
@builtbyjuz4419 Жыл бұрын
Love to see a burnout car build for something different? the super 6 skids pretty damn well 👌
@79series Жыл бұрын
Paints lines pretty darn well on that sticky pad.
@TheScary79 Жыл бұрын
Another great vid.... old supermang wasn't really built for burnouts, so I think it did pretty good myself when the stroker is in it it will kill some tyres then I reckon.
@351clevelandmodifiedmotor4 Жыл бұрын
it's utter junk, my Falcon destroys both rear tyres in under a minute
@hespie1 Жыл бұрын
Great work Scotty, mangatude to the VN!
@-DEATHSTROKE Жыл бұрын
Mate you did great, top effort!!! mang the fkn world!!
@SHOCKcustoms Жыл бұрын
Love this vid Scotty. Awesome change from the 1/4mile stuff. Lots more of this goodness please! Burnout car build on the channel?
@NotLikeThat420 Жыл бұрын
Onya Scotty!!
@bigsohc Жыл бұрын
The carnage vt Calais from awhile back would of been an excellent burnout car with the 5L. Maybe build something with a stout 355?
@STREETMACHINETV Жыл бұрын
Yeah it would have been a good skid pig. Maybe we should have kept it.
@bigsohc Жыл бұрын
@@STREETMACHINETV especially the prices of v8 holdens nowadays
@jaybancroft2851 Жыл бұрын
Love how it just loves smashing gears 1st 2nd 3rd and on song 👌🏼👌🏼
@STREETMACHINETV Жыл бұрын
Yep, it does it easy
@jcr6548 Жыл бұрын
Did The Mang proud brutha!👏
@mikey380sx Жыл бұрын
I've knocked off work, got a beer and now it's time to watch Scotty rip some skids. Happy friday!
@rxcosmo76 Жыл бұрын
Nice work Scotty. I would be shiting myself too ,it's not easy.
@STREETMACHINETV Жыл бұрын
It's way harder than anyone gives these guys credit for.
@ishakespeare3898 Жыл бұрын
Love it, sounds freakin' sick too!
@karloz83 Жыл бұрын
Awesome as up the gears Stab and steer well done. 💪🏽
@56WagonWheel Жыл бұрын
It was a good effort Scotty, she would be proud.
@SYNiC77 Жыл бұрын
Love ya work Scotty, always willing to have a crack, keep it up mate 👍
@MrEmJay_ Жыл бұрын
Car looks mint great job !!
@ryansmith1461 Жыл бұрын
that was awesome love the mang
@perry-productions1745 Жыл бұрын
Good on you mate 👏 great job. You'll do better next time.
@tex308253 Жыл бұрын
If the hose didn't blow that would of been a great burnout ! Supermang does some pretty good skids though !
@zacnorthmore4544 Жыл бұрын
Awesome vid Scotty 👍
@jacobhughes9737 Жыл бұрын
Absolutely awesome can we get more burnout content? Maybe a budget build burnout car series?
@nathanpeachs2704 Жыл бұрын
Nice work Scotty, ya legend 😁 🇭🇲
@MrDattopet Жыл бұрын
Still good to see lad
@CliffB5A4 Жыл бұрын
Top effort 👍 I never realised we share the same last name. That first test skid I thought you were gunna tip it into the wall. 😱
@STREETMACHINETV Жыл бұрын
Yeah, it felt close in the car
@CliffB5A4 Жыл бұрын
@@STREETMACHINETV I bet it did haha 🤣
@MoSSdoGGz Жыл бұрын
Hey Scotty, tip if you skid it again is take the fan relay out and short it to run constantly unless you can do it on the computer?
@STREETMACHINETV Жыл бұрын
We can adjust the fan cut in speed through the ECU
@DukeOfTwist Жыл бұрын
It was a bit of fun whilst it lasted, now back to our scheduled programing; 1/4 mile mastery of Aussie Street Machines - 'Next Time on Carnage'
@stupidfalcon7837 Жыл бұрын
Ghetto is still sick, love seeing that thing 😍😍
@STREETMACHINETV Жыл бұрын
It's a beast
@tassietony1226 Жыл бұрын
Well done Scotty this looks like a lot of fun you need a burnout car mate
@chefcamsey1375 Жыл бұрын
Still an awesome rig
@Gordo31313 Жыл бұрын
Well done Scotty, she done alright… surprised she spun in the big boys rubber, I use to run with the illusion of horse power via fire extinguishers borrowed from 711….
@STREETMACHINETV Жыл бұрын
It has no trouble turning the tyres, that's for sure but yeah all the rubber can make things harder for the "horsepower challenged"
@johnkirkilis34 Жыл бұрын
Nothing but a smokin' burnout for a Friday morning, Scotty style fry those tyres Carnage way.
@andrewtaylor9615 Жыл бұрын
Put a switch on the alternator and top off the tank! that sound is so maddenning
@STREETMACHINETV Жыл бұрын
Maddening, as in good. Right?
@leslieharding7514 Жыл бұрын
Yes scotty yes, burnout car !!
@HyperVerda Жыл бұрын
She does alright aye !!!!
@kenny1034 Жыл бұрын
I left a comment with Fullboost on their latest NOMANG video that they should drag race Supermang. That would be an Aussie classic 👍
@kenny1034 Жыл бұрын
They reckon "yeah maybe one day", sounds like a challenge...
@STREETMACHINETV Жыл бұрын
Let us turbo it first so we can put up an equal fight. NOMANG is fast
@kenny1034 Жыл бұрын
@@STREETMACHINETV would you seriously think about doing a turbo setup on the Mang? I've seen some stout ecotech turbos pushing big numbers, might be a strong contender against the Barra.
@STREETMACHINETV Жыл бұрын
@@kenny1034 that was the initial plan, it still could happen
@blackieforster7018 Жыл бұрын
Awesome effort yes build burnout car
@christophermclean5620 Жыл бұрын
Arr the mang is strong in this one!!!
@Doc_in_the_carpet_truck Жыл бұрын
Ha shit hot Scotty good wholesome fun 👍🍻 didn’t carnage bad that’s a fucken bonus !!
@justin3131ify Жыл бұрын
Scotty that Au ute I keep hassling you about that was in the garage at your house prior to the spicy cough. Now that could be a sick skid rig.
@STREETMACHINETV Жыл бұрын
It's a BF but yeah would make a great burnout car with an LS1
@justin3131ify Жыл бұрын
@STREETMACHINETV Ahhh Grim! Can't really tell B series ute from an Au having only seen the rear. Scott if you do use the B series ute please 🙏 do not LS it.
@STREETMACHINETV Жыл бұрын
@@justin3131ify but it'll make people lose their minds :)
@justin3131ify Жыл бұрын
@@STREETMACHINETV That'll include me! 😁
@clayjones8301 Жыл бұрын
Awsome fun
@Xbudmarley420x Жыл бұрын
I am predicting "on this episode of carnage we are building a burnout car
@STREETMACHINETV Жыл бұрын
Not unless we get alot of people calling for it, and there hasn't been so far
@glennponting8609 Жыл бұрын
Nice job Scotty she was singing
@brendanwilson8977 Жыл бұрын
Please build a supercharged Barra burnout car. Something different, and awesome content. Loved every second of this video!
@STREETMACHINETV Жыл бұрын
There's a couple already
@brendanwilson8977 Жыл бұрын
@@STREETMACHINETV make it both turbo and supercharged 😌
@MrEmJay_ Жыл бұрын
@@brendanwilson8977 that’s a bit wild haha too much for a barra
@mahcooharper9577 Жыл бұрын
Awww man, shame about the damage to the body and the mudflap (told you to take it off lol) but jeez it sounds good for a 3.8 and looks like you had a good fun day.
@TaunusMicha Жыл бұрын
Yeah, the old burnout problem... less air flow for cooling. I saw some people with regular street cars trying this and blew their radiators/cooling systems. I never had that problem with my Ford V6, even it had no electric fans. These engines have been called farmers engines because they weren't very powerful but last a long time with low maintenance when not been totally abused
@guyharrison909 Жыл бұрын
When you rev me like this and you touch the rev limiter like that it's all coming back to me. There where things I'd never do again ( shifter). There were nights of endless pleasure it was more than your laws allow . Ok I may have taken this a bit too far.
@joelzerafa1930 Жыл бұрын
Scotty needs a sponsor for a new pair of pants 😂
@lukehill1598 Жыл бұрын
Do a skid car Scotty 🤘🤘
@smithy2 Жыл бұрын
To paraphrase Doug Marcaida, This car will skid 🤙
@4sico Жыл бұрын
Good on ya Scotty buddy,ya did WELL,and she sings on song,❤️ the shit❤️👍😳😊👌✌️☺️
@robertmcgregor230 Жыл бұрын
Do it Scotty
@qshank2752 Жыл бұрын
Awesome work Scotty always love the content. Is there a way to hide the cutout on the vn bonnet to make it a full on sleeper or are the clearances that tight? Sorry if you have gone over this before.
@STREETMACHINETV Жыл бұрын
Once we settle on a combination we'll deal with the hole situation
@MegaGnerd Жыл бұрын
Go the ecotec!
@Joedennett69 Жыл бұрын
Yes dedicated skid car build
@DoctorWEBB Жыл бұрын
I know...T WEB can easy hook ya up with a alt reco 😁👍
@burnoutkings183 Жыл бұрын
Up the 6 do a dedicated skid car I've been asking for years
@markchappy6282 Жыл бұрын
YES 🙂
@tony66au Жыл бұрын
Ancient L67 Versus Sustained Burnout? I reckon you did well considering its built for Drags Scotty. Big difference between 10 seconds down a dragstrip and 3 minutes of Go till you Blow tyre shredding............. Highlight for me? The Green VG Val on test day but im biased :-)
@lukeberne428 Жыл бұрын
Re live the youth Scotty and build a "BUDGET" build mang haha. The old girl did well i say 👌❤️
@daddosjeffery Жыл бұрын
Silly questions Scotty
@mg74xbgt Жыл бұрын
I loved the final wrapup of the Dunnydore's performance being done in front of the Portaloos !! Was that intentional ?? Great Vid and keep playing with the Supermang !
@STREETMACHINETV Жыл бұрын
Haha, it was just where we pitted
@Limitr5.7 Жыл бұрын
The thermostat would have caused the pipe to blow...good effort on the skids thou
@ba.skidderLOCKDOWN Жыл бұрын
Listen to it sing whine all day
@EricaMTB Жыл бұрын
I was there. With the 3-53 Detroit.
@STREETMACHINETV Жыл бұрын
You and your 3-53
@bobroberts2371 Жыл бұрын
0:26 " We bake Fresh Daily " / " Hand Crafted " / Fire Hose Reel . Just what kind of ice do you have down there?
Melbourne Car Scene Mid 1980's. Car Meet Plus Burnouts in Carlton- Lygon Street and Bouverie Street.
Aussie Jonno
Рет қаралды 65 М.