Stripping a Perfectly good Holden VF Ute For The Engine!

Рет қаралды 124,136

3 ай бұрын

This 2013 Holden VF Commodore Ute was recently Written off by an insurance company due to being involved in a flood. Usually a flood-damaged car can be quite expensive and troublesome to repair but in this case, the flood water didn't enter the engine or damage any electronics making it a perfect donor vehicle for an engine conversion.
I'm very excited for this project and keen to get stuck into the conversion next week! comment below what vehicle you think this engine is going in!
Get your hands on some Bars Bugs X Skid Factory Windscreen Cleaner! bit.ly/3VNZ45q
(Lemon Squash Scented only, not for consumption)
With the addition of a Harrop 2300 Blower this L77 is going to BOOGIE!
www.harrop.com.au
‪@HarropTV‬
Do you like this episode? how about sharing it to your mates!
Still reading? You must be a Legend, Buy yourself a new shirt! www.theskidfactory.com
Write your name in the Credits! / theskidfactory
Follow The Skid Factory for more content:
woodrigos?...
theskidfact...
/ theskidfactory
/ theskidfactory
Please note: We're just a couple of Mates hanging out in the shed, There's no big production companies, fancy cameras or Scripts, We love what we do and try our best to create quality content for you to enjoy every week. Sometimes that includes tearing down an L77, Other times it's as simple as bolting on some wheels to our daily drivers. Don't forget that working on cars isn't easy and can be dangerous. Use Ya Brain and take the necessary safety precautions whenever you're modifying your car. Consume Lemon Squash responsibly & Thanks for watching. #HOLDEN #COMMODORE #UTE

Пікірлер: 582

@theskidfactory 3 ай бұрын

Get your hands on some Bars Bugs X Skid Factory Windscreen Cleaner! bit.ly/3VNZ45q (Lemon Squash Scented only, not for consumption)

@someyoungguy6990 3 ай бұрын

Hey Woody, you forgot to pin this comment!

@gowerski 3 ай бұрын

I'll drink it if i want!

@theskidfactory 3 ай бұрын

@@someyoungguy6990pinned! Thanks man

@dazs3885 3 ай бұрын

Is it out in nz or just Australia

@Me-bd4bh Ай бұрын

@@theskidfactory @theskidfactory “LEMONY FRESH” - Taz (Tasmanian Devil) 👌👌

@StandardBubbleBoy 3 ай бұрын

Hey Woody, you're knocking it out of the park. Thanks brother.

@theskidfactory 3 ай бұрын

Thanks Stan!!

@poochey1 3 ай бұрын

The new shop is now "The Skid Factory", don't be afraid to say it Woody! No need to call it the Wood Factory or anything! Home is where the heart is, and The Skid Factory is wherever The Skid Factory is filmed and cars that Skid are made!!!

@anthonywhelan8373 3 ай бұрын

The only thing you need to know about afm or displaced on demand is deletion of it

@theskidfactory 3 ай бұрын

Agreed!

@dB_944 3 ай бұрын

If you’re lucky, it will just burn oil for the rest of its life.

@glynnjohnson9065 3 ай бұрын

Rule number 1 with an LS, never look at the cam bearings, ever. Loving the content Woody, as somone who's watched from day 1 you are carrying the torch so well in your own space!

@Mach1048 3 ай бұрын

So many Parts! That Ute is so clean that your mate will make his money back on parts.

@someyoungguy6990 3 ай бұрын

Was thinking the same thing!

@maisydaisy9970 3 ай бұрын

No he won't.

@petrolheadhomestead5337 3 ай бұрын

You got it back to front Woody. Statutory write off CANNOT be re registered ever in Aust, it’s parts only. Repairable write-offs CAN be re registered, after the items listed are cleared by a special inspection, then it must pass a regular roadworthy/safety certificate. Love your show mate 👍

@alanwayne9317 3 ай бұрын

Hey Woody, couple of things it would be a good idea to check. 1.The ring gaps, boosted engines have hotter combustion temps, if the ends but together the ring lands will crack off the pistons. 2. Check the rubber seals on the plates at the front and rear of the cam. Also change the bar bell in the rear of the oil gallery, both of these can cause low oil pressure if they leak. 3. Check inside any of the electrical connections that have been under water for signs of water/corrosion, if they look OK spray the insides with electrical cleaner/corrosion inhibitor. This will usually prevent electrical faults/codes down the track. It would be great to see it go into a group C style commodore with big flairs an tyres.

@Dumplingu 3 ай бұрын

Love the videos since you took over Woody, I love hearing all the special colloquialisms that you use in your speech and it makes me feel like I'm learning Australian culture as well as about cars. Keep up the good work, the vids are schmicko

@theskidfactory 3 ай бұрын

Thanks mate! Appreciate the response! So long as people like yourself keep watching I’ll keep making Shmiko videos!

@lightfoot.2000 3 ай бұрын

Legends! 🤘😎

@MrButtonpresser 3 ай бұрын

Lemon Squash windscreens. Skid Factory vibe where ever you drive.

@TimReidy-ep3xo 3 ай бұрын

Great videos, but was disappointed not to see the 8 ball in the sump.

@yowie0889 3 ай бұрын

It could be Alan's 8-ball.

@seandenham1703 3 ай бұрын

"Lemony fresh" - Tasmanian Devil 😂

@johngibbs8345 3 ай бұрын

Killing it on your own Woody! Keep it up 👍👍👍👍👍

@sebastiancarrall117 3 ай бұрын

Killing it. I've always found it easier dropping them out the bottom on the subframe, struts and all

@theskidfactory 3 ай бұрын

Will give that a shot next time!!

@trevevns3242 3 ай бұрын

I prefer to pull the V8s out the bottom v6s out the top bottom is a lot less to undo I take strut tops off brake lines abs plugs K frame bolts gearbox cross member exhaust at the cats and any wiring connecting engine or gearbox to the car undo the 13mm that joins the column to the rack undo ac compressor to save gas if no way to correctly drain the gas missed a few things but that's most of it

@sebastiancarrall117 3 ай бұрын

@trevevns3242 damn right dude, even the v6's I drop put on the subframe. We've got a large 1 tonne dolly we just roll under, lower the hoist down, block it all up and raise the hoist.

@robertsimpson956 3 ай бұрын

I bought some of the windscreen cleaner the other day, couldn't stop myself lol, as always the videos are great

@someyoungguy6990 3 ай бұрын

Love the little giggle for you wife to be at the end mate! Super cute!!

@peterjewell9436 3 ай бұрын

Woody your doing a great job doing this on your own good to see a group of young guys having a crack at something you haven't done before cant wait to see what you put that motor and box into hopefully an early holden👍

@slickstrings 3 ай бұрын

Tazzie devil is who you were thinking of woody

@Heretic306 3 ай бұрын

I laughed out loud at that…what was that guy again….named after a state in some country in the southern hemisphere..

@rob83r 3 ай бұрын

@@Heretic306the state woody was born in too

@LobbyDaLobster 3 ай бұрын

Nah it's a little monkey guy that's spins around in space jam... 😂

@the_real_superstickman 3 ай бұрын

Can't believe Woody can't remember Taz' name. And he didn't say lemony fresh he just said lemon fresh when they finished the spit shine in space jam. There's a throwback, haven't seen that in a while

@Mitchkp 3 ай бұрын

Loving the content, keep it up brother. Glad to see you succeeding

@Tonyflags3323 3 ай бұрын

Welcome back to the LS factory!

@jonnewton5929 3 ай бұрын

Woody, ya looking sweet mate. Getting it done bro. Cheers

@StuartBlake-iz6rf 3 ай бұрын

Good job Woody. Looks like a fun project. Love your channel. Hopefully, an old Holden as they get faster.

@wick2580 3 ай бұрын

You got me to like the video at the end Woody, fixing it because you messed it up is how it should be done 👍

@hazadventures 3 ай бұрын

The engine is going into a Suzuki jimny and the bolt is to ensure the torque when it comes off the line really does bend the chassis……yeah I think I got that right 😂 mint epp mate enjoy 🤙🏻

@eppyz 3 ай бұрын

Appreciate the shout out to the USA viewers. Here in the USA we would see this Holden as a modern day Chevy El Camino. Then there is the whole debate here on what is really a "truck". You have half the folks saying body on frame is a "real" truck vs unibody is a car pretending to be a "truck" haha. This car/truck would have sold well here in the USA but the "truck" market is flooded and competition would be tough probably why it never came here. Personally? My favorite hot rod truck of all time is the 1991 GMC Syclone. Man I would love to have one of those...Cheers from California USA to all my Australian car loving Brothers and Sisters!!👍

@thomaswatson8791 3 ай бұрын

Loving the videos Woody, absolutely killing it. It doesnt matter as you are stripping it but you could of jump started it from under the bonnet on the passenger side there is the red post and the negative is there also

@Dean_Ranga 3 ай бұрын

The first thing you did wrong was check the cam bearings lol. Once you have a look and see wear your bound to have issues lol. If you dont look they will be fine. Good work Woody. Loving the channel

@theskidfactory 3 ай бұрын

Haha! Is that the same as reusing the lucky wrecker engine oil?

@SomeMorganSomewhere 3 ай бұрын

Schrodingers cam bearings ;)

@_wallnutz_ 3 ай бұрын

Did he check the oil didn't have flood water in it before he tried to start it. Lol

@Woodie-xq1ew 3 ай бұрын

someone has been to Matt's LS rebuild school

@Dangeresque14 3 ай бұрын

Oh man, I have the Chevy badged version they brought over to the states. So cool seeing you guys work on one!

@schwags1969 3 ай бұрын

Woody, it is the flux capacitor ground strap mount. And great job on the new format, I love it. I loved the old one to.

@geoffreyadams6236 3 ай бұрын

Doing a good job bud. Keep it up.

@kingsleywray6632 3 ай бұрын

Interesting. Thanks for sharing.

@richt247 3 ай бұрын

Awesome episode as always! Keep it up!

@StratoJohn 3 ай бұрын

Great content Woodrigo!

@Fawx521 3 ай бұрын

Love those Utes. I wish they brought some to the states!

@brianbob7514 3 ай бұрын

I’m excited to see you do this on your own woody :)

@mattdonnellan8544 3 ай бұрын

Great stuff woody, videos are good

@ajistewart 3 ай бұрын

Old WB statesman would be awesome. My dad had one back in the day and an LS into one of these would be sweet

@allanmaccaul1465 3 ай бұрын

What an idea..!! I've always needed the exterior of my windscreen to be lemon scented.....😆

@ro63rto 3 ай бұрын

🤔 Most windscreen fluids are scented here in UK. Where are you from ?

@nathanmaret2465 3 ай бұрын

@@ro63rto Really? Interesting! Today I learned... Here in Canada I'm not sure I've EVER seen a scented windshield washer fluid (that's what we North Americans call it :P).

@malliz1 3 ай бұрын

Nice one woody

@gavindavies9717 3 ай бұрын

In a Ej Holden 😁 Keep up the great work you’re doing 🤙 It the Tassie devil from Space Jam

@robotafflicition 3 ай бұрын

I have a 14 Chevy Caprice, I’d love to see some more late model Holden stuff. I have that same driveline and I love love love it 🎉

@jimmyappleseed9840 3 ай бұрын

Great episode Woody. No clue what its going in. Don't skip the adds...

@rhspek 3 ай бұрын

The V8 Holden Ute is one of my dream cars. I've only seen one real one in the flesh, had to go to the UK to see it. And I drove an Opel Omega based replica once, but that was not quite right: wheelbase too short.

@mickthurston9883 3 ай бұрын

The Wood Factory. Fnr fnr. Nice one Woody can't guess the receiver. Mick London

@gtrmatty 3 ай бұрын

I welcome the return of the squeaky hammers!!! Also congrats on the sponsor I'll definitely grab some now.

@cornishcat11 3 ай бұрын

great video mate. loving the content.

@kevinstogdale881 3 ай бұрын

Wish we had them in the UK looks great bit of kit

@TheStreet111 3 ай бұрын

Nice woody!!!!

@73bigted 3 ай бұрын

Must be a Mazda MX5 🤷‍♂️🤷‍♂️ Keep up the stellar work Woody 👍🏻👍🏻👍🏻

@michaelreynolds1904 3 ай бұрын

As a viewer from the states that vehicle would be absolutely amazing to have here. There are also ways to get them registered legally which which would make it a great cars and coffee vehicle.

@tyronestock8044 3 ай бұрын

That Holden VF Commodore V8 LS Engine it will be amazing

@amystanbridge6482 3 ай бұрын

For the conversion you will need everything! mate of mine did this conversion into a SV6. He ditched the car before the project was finished and he was cursing like a veteran trucker. Needed the full Loom- Engine and Dash, BCM and ECU (They are Linked), Heater Hoses. List goes on. That parts car will basically be nothing but a shell once your done.

@wombat696969 3 ай бұрын

6:17 the L77 engine is a 6.0 litre V8 not a 6.2 litre. The LS3 in the series 2 is a 6.2 litre. I say this Ute had aftermarket wheels on it which were taken off before you got it - the wheels that are on it now are SV6 wheels.

@mathewhyland8925 3 ай бұрын

I reckon that old Holden Kingswood sitting off to the side there Woody is where the engine conversion is going to be .

@Andresckim 3 ай бұрын

Awesome video! Texan here and I dream about cutting up nice wagons to make the Ute like the infamous Subar-Ute.

@shannybangers88 3 ай бұрын

Genuinely surprised to see a GMC tool product still in working order

@Dwightstrokem 3 ай бұрын

Here in the US we had the El Camino and the Ford Ranchero which are both technically utes although we never really called them that. We also had the Subaru Bramby which was called the Brat here. Utes are cool.

@ZeroTo60Tube 3 ай бұрын

Hell yeah!

@raelik777 3 ай бұрын

In the US, cars like the Ute were what we'd call a 'coupe utility', or most folks would say "Like an El Camino". Pickup trucks here are just smaller versions of larger trucks more or less, and anything that looks like a coupe or sedan with a bed would be considered something else. Technically, we had these all the way back in the 30's with several cars having truck-style beds or a trunk space that could be converted to a bed, but back then truck cabs and car cabs weren't really all that different looking. For something really comparable to a Ute, we had the Ford Ranchero first in 57, followed later by the El Camino/GMC Sprint/Caballero and the Dodge Rampage/Plymouth Scamp, and they also sold the Toyota Corona Mark II pickup here (that one looked much more like what we'd consider a pickup truck, but it definitely had roots in the Mark II passenger car) here. Later on we got the Subaru Baja, and I feel like I might be missing a couple other ones.

@chrischerry2787 3 ай бұрын

That would be a suitable engine upgrade for my Triton!

@BonusChip 3 ай бұрын

Yeah mate you're right about keeping it, never chuck anything out til the build is done and cruising

@yesnomaybe3372 3 ай бұрын

Sick!

@flame-on-3 2 ай бұрын

I was looking forward to seeing in the comments all the different cars that people guessed, pity the bulk of the audience didn't watch to the end or can't act on an idea. LC Torana, 240z

@markm235 3 ай бұрын

I would love you to say it's going into my FJ62 land cruiser

@benjaminkaper21 3 ай бұрын

Hi Woody, loving the videos mate, I reckon the LS is going into an old one tonner Ute, should put a Barra turbo in the VF and do a drift Ute build 😂

@MattyFielding6 3 ай бұрын

I like it when the red water comes out

@grantreed9899 3 ай бұрын

Tazzie devil, spit shine reference ftw! Haha great movie, the original anyway

@shauncoudrey3004 3 ай бұрын

LS into a Colorado or Ranger would be cool , your doing well Woody 👌👌

@robbebrouth3262 3 ай бұрын

Hey Woody - love the VID - keep 'em coming. If the owner of the ute wants to sell the tonneau cover - please let me know. I have an average one that could go in its place to keep the rain etc out. The one on that ute looks in good nick. IN Brissie so easy as to do...

@shoominati23 3 ай бұрын

I love the engineering of the LS onwards GM stuff. Just two gonzo bolts holding a crossmember or bracket on instead of 12 small ones like Mercedes or Beemer in inconvenient places, so good from a mechanics standpoint

@fredf9990 3 ай бұрын

Hi there, going to do a conversion with a 6ltr+ 6l80e into a defender. the gear lever[shifter] plus wiring and BCM for the gbox weren't supplied, but still trying to get the stuff from the wrecker, if you don't want yours, let me know... much appreciated!! looking forward to the rest of this build... cheers guys.

@pulpsport82 3 ай бұрын

Great to see Whincup working on a commodore again….😅

@fishomickoadventures8076 3 ай бұрын

If your keeping the 6l80e make sure you keep the bcm for tap shift , there is ways around it without the bcm but a lot easier with it

@jamesbaylis9438 3 ай бұрын

Was hoping u were upgrading the Forklift 😂😂, always looking forward to a Lemon Squash catchup at the Factory ❤❤

@theskidfactory 3 ай бұрын

I do need to give it a service and fix the exhaust leak! I think my neighbours are sick of hearing the 4K 😂

@lightfoot.2000 3 ай бұрын

Baylis ya legend! 🤘😎

@someyoungguy6990 3 ай бұрын

Na mate just needs a turbo like the one at Al's

@Vaino_Hotti 3 ай бұрын

@@theskidfactory A turbo should work as a gasket between the manifold and exhaust pipe :D

@NSUGS 3 ай бұрын

Poor Bruce 2, rest in piece

@joelbranch9029 3 ай бұрын

Kingswood for sure

@jameshusband3302 3 ай бұрын

That engine with a TH400 would be fun in a Chevy S-10. (a small GM USDM ute, the size of a Tacoma) Cheers from Texas

@coreylawrence7051 3 ай бұрын

Woody you should try putting some Permatex anti-seize lubricant on all your threads. Makes life a lot easier getting on and off LOL and will get a better torque rating as well. Also i think the engine is going into a Nissan Silvia! keep up the great work mate love the show and the bloopers at the end 🤣🤣

@user-hx1gj4tp8u 3 ай бұрын

Its the Tazzy Devil that says lemony fresh

@ImgoneButUrstillHere 3 ай бұрын

I don't know why but for some reason I feel like at some stage Al's gonna get a SoS call to come in and save the day on this build lol idk why but it's 1 thing taking something apart but putting it all back together whole other story.. good luck broski

@xozindustries7451 3 ай бұрын

That’s a nice Ute, I wish we got them in the States, I hope it’s going into a Corolla, that would be sick!

@eamonquinn70 3 ай бұрын

Now you also have a perfectly good ute for a Barra swap

@wild84u 3 ай бұрын

Too late now but pulling it out the bottom with the kframe and trans attached is the way to do it. Pulled heaps out working at holden and you could have the entire assembly out by morning smoko

@Freud1au 3 ай бұрын

This is the kind of thing my father and uncle did, they bought gt falcons to pull the motor out for ski boats

@AdrianKeevill 3 ай бұрын

Can't wait to see the L77 Pajero take shape! 🤣

@matthewgreen2653 3 ай бұрын

A bloke i know had a Landcruiser repaired because it got hit in the rear i think. Put the good cabin and motor on another chassis he bought, had it resprayed at the same time. Went to get the rego sorted out, turns out the chassis donor was a statutory writeoff because it was flooded. Had all kinds of drama getting it sorted out, but got it done in the end

@01ryan10 3 ай бұрын

Hey Woody, not sure if you are aware, but might be at this point, Supercheap make a perfect fit drip tray for that exact engine stand you got from em. Hope that helps. Keep up the solid work.

@BubbaGTi 3 ай бұрын

VF will make a nice drift chassis for someone 😉

@trevordevis1971 3 ай бұрын

Bugger, commenting too late...It's going in a Mini Moke!

@mitchamusprime8655 3 ай бұрын

The overly close close ups of Woody's noggin is why I'm here 🙌 😎

@caseyscrivener9972 3 ай бұрын

Cool shop Woody. Not sure about your state but in WA, statutory write offs cannot be re registed. Only repairable writeoffs. I would think laws in Aus would be same but the variance from state to state is rediculous. Keep on the builds mate. Im trying to get my hq one tonner finnished.

@65cj55 3 ай бұрын

The VF Sedan/Monaro were sold in the USA as the Chevrolet SS, a Guy in Tennessee imports VF Utes and Wagons, and uses new parts for the Chevrolet SS including the Firewall and Dash to make them Lefthand Drive, and sells them Road Legal & Regoed..google Left Hand Utes USA.

@davidevans6045 3 ай бұрын

there prices are pretty good you couldn't get a maloo here in Australia for that price

@robotafflicition 3 ай бұрын

Yeah watching this video I wish I could get that bare chassis and swap all my caprice stuff over to it to have a US Ute

@65cj55 3 ай бұрын

@@robotafflicition You might be able to, drop them a email.

@65cj55 3 ай бұрын

@@davidevans6045 Indeed, he does a good job as well, i think there's video on KZfaq.

@reganwilling2010 3 ай бұрын

Looks like the water got quite up there looking a rust level on torque converter and flex plate

@mikehovik3635 3 ай бұрын

glad to see the spanners turning again in the factory

@ncarne1993 3 ай бұрын

Good thing about the L77 it came from factory able to run E85 but bad thing about them is single row timming chain upgrade to double row if can might save engine if the single row fails

@dysonest 3 ай бұрын

It's going in a VB commy 👌

@dysonest 3 ай бұрын

The red one at the start

@mickfbr 3 ай бұрын

I hope so, that'd be mean!

@65cj55 3 ай бұрын

Landcruiser 80 series.

@STKMK1 3 ай бұрын

Blokes advice 👌👌

@Celician83 3 ай бұрын

Pretty sure the Taz reference from Space Jam was from a old 90's Pine Sol floor cleaner commercial, (showing my age). Was a when they first introduced Lemon Scented Pine Sol.