"I'll just make my brother do it" LOL that's the ultimate 3D print post-processing hack

You're my go-to resource for reviews of printers. Both FDM and resin. Keep up the amazing work.

Dude those failure warnings are sweet! They worked so well

One of my favorite channel, if not the one! Your reviews are always honest.

Amazing work as usual. I was looking for my next printer and you convinced me this is the one for me. Once again, thanks a lot for your great work.

This is a very great video. Thank you for reviewing in a calm voice.

another great video. can we get more cnc reviews?

clear concise precise I subbed

If anyone is reading this who wants one of these, please get one. It’s an absolutely fantastic bit of kit. I’ve done a lot of research and a lot of testing. The results that have worked 95% of the time is Elegoo resin (standard) with a 3.5 seconds and 40 seconds. Trust me, this works perfectly!

Another great video as always 👍. Good points Interesting printer 😀

I definitely need that new wash and cure for sure. I'm still working off of an old 2.0 and a way to just drop the plate into the bath would be handy. Great review of the printer. I love the new sensors as upgrades vs my M3 Plus. As for the scraper, I thought a scratched bed just meant that you printed stuff lol. Keep up the great work, you're the best no BS review on the internet. Check out Anycubic's ABS-like 2.0 as a resin. It's water washable and tough unlike most other water washables.

ok, this was such a great video. im really interested in starting 3d printing, and this printer got my attention for auto leveling, and all this sensors, but really wanted to see them in action. thank you very much for this indepht information on resin, instead of high speed one - since i really need to order it outside of the country and taxes on it would eat me alive for a couple of bottles, so am happy to see it in works with water one, as i can get it localy. after watching some videos on this machine, i really wasnt sure anymore, but ill def get it now, and try my hand in some 3d prints. thank you very much Aurora!

Hi, am I right that k1c and kobra 2 pro are the same in terms of print quality and overall performance with tpu,petg and pla? Are there any other differences,except enclosure, size and software? Thank you and Helios for reviews and detailed descriptions of printers

That's a really cool bowl. I'll have printed so far was a gyroid infill and some speaker grills. Next is a music tool for helping select cord progressions based on the mode and key you are playing in.

How much she knows is really impressive. I am a big fan ❤

thank you!

Very nice video as always. If I could give a suggestion, it would be to also print miniatures for tabletop games when testing resin printers, as it is what a lot of people will use them for, and they are much smaller models with heavy details. It's also important to highlight that studies have shown that air purifiers do not add protection unfortunately, but only remove the smell. People should still wear masks and vent out fumes, even with an army of air purifiers.

Great review - I might add that flexplates function as intented (have one for saturn 2), albeit you have to sand the surface with 200 grit paper or better. Adhesion is good, even at 15 burn in layers. 👍

Great review as always, keep it up. Do you have plans to review Flsun s and t1?

I love your videos! Could you do a review on the Two Trees SK1?

Do you plan on having a list of recommended resin printers? Keep up the good work!

Awesome video! Your review of the K2M made me get one! I think the direction some of these company is going with cloud printing is all wrong.

ever used simple green. Uncle Jesse did a video about it for replacing isopropyl alchol and it works pretty well

Have you tried screen capture with OBS? I've never had any issues capturing those layer previews from different resin slicers using it. Nice demo of the smart features in this printer! I've been enjoying using mine quite a bit.

When are you going to review the Kingroon KLP1?

Thank you! One negative thing though, the "splashing" should be noted.

Plastic scraper is used to remove resin, from the bottom of the container.

The single best 3D Printer review channel I've seen on KZfaq. Period. Truly the "Gamers Nexus" of 3D Printer reviews.

Is there a recess at the back for the heater cable? Nobody has yet shown what the printer looks like from the back (with heater)

"...so I'll make my brother do it." Respect. One question about dealing with the failure of the high speed version of the default model: did you test if the auto-check system can determine if there is cured resin stuck to the vat film or did you just remove the failed print and proceed to the standard speed version of the model? You'd think we'd all remember to remove failed prints, especially complete failures like that one, but if only one support or feature fails and and sticks to the plate it would be nice for the printer to detect that spot to avoid causing a failure with the next print (or damaging the printer). I'll also say that I've really enjoyed the Fula-Flex plate I put on my Phrozen Sonic Mini 4K. I have had a few adhesion issues but those were before I got the settings dialed in for new resins...being able to pop the plate off the magnet and then the print off the plate is super convenient. Another thought I had: while I have no doubt the 14K screen is better than a 2K or 4K screen, is it really that much better than an 8K or 12K? I recall from reading about future television technology that there is little need to go past 8K for normal-sized televisions because the pixels are small enough that the human eye can no longer discern even smaller pixels...at what point do we see similarly diminishing returns with resin printers? Great review as always!

👍🏻👍🏻

You can correct the plate adhesion being too strong by properly calibrating the resin profile. You should always do this anyways, as built-in profiles tend to be over-exposed, which leads to lost detail and over-exposing a well supported model results in harder to remove supports and more damage to the model from support removal. I would advise never using a built-in profile for anything except maybe a starting point to calibrate from. With a properly calibrated resin profile removal from the build plate is almost effortless, and supports pull off with a pleasing rip sound and leave almost nothing behind, including scarring. (this of course, assumes the model was well supported).

Did the water washable filament stink or produce any odors printing?

I agree with your comment about cloud printing; I deleted Gravity Sketch when it was tied to cloud printing, and they discontinued the iPad version.

Still waiting for someone to realize a multi-vat setup can be done for multi-color resin-printing.

Those carbon filters ARE NOT enough for a safe prolonged usage. You **need** an enclosure with a hood or an extractor (and an hepa filter) or you need to change air after each printing and not live in the printing area. They give the illusion of safety removing the worst of the smell, but it's not safe and you don't want to breath resin fumes (or pla or abs, for that matter...) repeatedly. I'm not sure if we have long term studies on the impact of resin fumes on respiratory systems but i don't want to be the first to find out what "resin sensitivity" means in my lungs...

Just needs an auto fill but an ez and simple one by gravity fed like a dog water dish.

The tiny prints are actually absurd

IPA is still better because you can't just dump that water down the drain.