SubD ORGANIC MODELING TUTORIAL - Thomas Heatherwick's Bombay Gin Distillery (Rhino7 + Grasshopper)
Рет қаралды 3,220
Күн бұрынI got inspired and decided to do a quick Saturday sketch modeling Thomas Heatherwick's Bombay Sapphire Gin Distillery. This is using Rhino 7s new SubD modeling technique and a simple grasshopper script. Please like and subscribe!
Here is the reference image link: arquitecturaviva.com/works/de...
______________________________________________________
My name is Andrew and I am a designer working in California and I am attempting to make these videos to share my knowledge about architecture/computation/design. I hold a Masters of Architecture from the Architectural Association in London and have worked across the USA and in Europe.
Let me know if this video helped and if you have any suggestions!
Instagram @arch.etype
Chapters
0:00 Intro
1:03 Rhino SubD
20:37 SubD to NURBS
23:21 Mullions in Grasshopper
@parametriconline 2 жыл бұрын
Hey, great content you got there!
@AndrewFriedenberg 2 жыл бұрын
I'm glad you enjoy it!
@cristhiance5 3 жыл бұрын
Thx for the tutorial(:
@AndrewFriedenberg 3 жыл бұрын
Let me know if you have any future requests!
@TimHalvorson 3 жыл бұрын
great tutorial Andrew! one more tech tip, if you're recording in OBS there is a way to add a filter to cut out noise. So any space heaters, fans, or computers processing get clipped out while it's recording so no need to post-process 👍 Feel free to DM me if you want help on the config! Great content I'm sure people will continue to appreciate your contributions on modeling best practices. Cheers!
@AndrewFriedenberg 3 жыл бұрын
Hey Tim thanks for the help. I just figured it out and also learned how to adjust the patterns on my new microphone....so hopefully you don't feel like you're inside my computers fan on the next vid. Thanks!
@TimHalvorson 3 жыл бұрын
@@AndrewFriedenberg All good! I remember using the Blue Yeti mic before and adding the filter in the recording software helped smooth over rumblings that go through the desktop into the mic if not on a stand and also typing/fan sounds. But anyway! Wasn't distracting enough that I didn't listen all the way through.
@AndrewFriedenberg 3 жыл бұрын
@@TimHalvorson thanks for the support! I checked out your vids and enjoy them as well.
@noarau 3 жыл бұрын
I had a hunch when working with subd in Blender that it needed a sensitive eye/touch, and this confirmed it. I was following your subd modelling very closely, trying to really see on the reference picture where each vertex were, how the rings were rotated and scaled. But when the modelling was finished, and I looked from your video to my Rhino window, I felt a smidge of frustration. Each attempt at correcting my model, through scaling, moving and rotating made it worse. I'm gonna try again from scratch tomorrow Still, thank you for the tutorial, I learned a lot!
@AndrewFriedenberg 3 жыл бұрын
Good luck, it is a very sensitive method! I highly recommend using as low poly as possible and then adding edge loops at the end to acheive the right curvature. .
@soniasood8598 3 жыл бұрын
Hi Andrew. Thanks for the tutorial. Can you also share the final .3ds model in here please?
@AndrewFriedenberg 3 жыл бұрын
Send me your email and I can share it with you!
@ibrahimsarhan4783 3 жыл бұрын
Thanks for tutorial. Could you make it for Shigeru Ban's centre pompidou-metz hexagonal structure? I tried it but i couldnt achieve by using grasshopper so i did it one by one and it was so time consuming :)
@AndrewFriedenberg 3 жыл бұрын
Oh wow that’s intense doing that manually. I’ll check it out and give it a try!
Andrew Friedenberg
Рет қаралды 4,9 М.
Andrew Friedenberg
Рет қаралды 1,5 М.
Braincatchers
Рет қаралды 14 МЛН
The Surrey Copper Distillery
Рет қаралды 46 М.
Andrew Friedenberg
Рет қаралды 4,3 М.
Braincatchers
Рет қаралды 14 МЛН