Using RHINO7 SUBD and GRASSHOPPER to recreated BIGs 2016 Serpentine Pavilion (Beginner tutorial)

Рет қаралды 4,904

Күн бұрын

Looking back on one of my favorite projects from BIG...their 2016 Serpentine Pavilion in London...I decided to recreate it simply in Rhino 7. There is many ways to do this and some more effective than others! Leave a like and let me know what to model next!
_____________________________________________________________________
My name is Andrew and I am a designer working in California and I am attempting to make these videos to share my knowledge about architecture/computation/design. I hold a Masters of Architecture from the Architectural Association in London and have worked across the USA and in Europe.
Let me know if this video helped and if you have any suggestions!
/
Chapters
00:00 Intro
01:18 Building SubD surfaces
09:10 Building grid in Grasshopper
14:51 Projecting to surfaces in Grasshopper
17:00 Generating extrusions

Пікірлер: 15

@josemanueltouron 2 жыл бұрын

man, you are great. Re the checked pattern, you say that it's not worthwhile figuring out how to make it possible always (with even numbers as well) I would love to see how to do it. Anyone has any clue??

@AndrewFriedenberg 2 жыл бұрын

Good question! I just made a post in the community part of my channel looking at this, check it out!

@alexisadjorlolo42 Жыл бұрын

Thank you so much for this!

@studio22a34 3 жыл бұрын

Hey this was great! Exploring subd right now for a studio project and your videos have been helping me get a better grasp on things. Looking forward to more :)

@AndrewFriedenberg 3 жыл бұрын

Glad you enjoy it, I’ll be putting out more stuff soon!

@alexisadjorlolo42 Жыл бұрын

Hey, this it awesome, would you be able to do the Sou Fujimoto’s Souk Mirage? I’m interested to see what plug-ins grasshopper would need to crest something like it

@AndrewFriedenberg Жыл бұрын

Actually that's a nice study of assigning different geoms to a cloud of points...maybe I will do that!

@elizaveta7699 3 жыл бұрын

hi! thank you for this video! It helped me to do study project) but I would like to ask you to talk about some points in more detail. For example I didnt know that to use 'quad panels' you need a plugin, so I had to search this for a long time... But really, thank you very much again! I worked in rhino for the first time and understood all your explanations

@AndrewFriedenberg 3 жыл бұрын

Ah sorry I should have put the link to the plugin in the bio. I will do that next time! Thanks

@kwangsunkang 3 жыл бұрын

Hi. Andrew. Is he really you? living London? Good luck with new try.

@AndrewFriedenberg 3 жыл бұрын

Hey Kwangsun! I’m glad to hear from you. I’m back in the USA now but MAYBE london soon. Hope you enjoy!

@calummolitor-dyer131 3 жыл бұрын

Hey! Very cool video, however I'm stuck on the Move to Point part, that module isn't showing up in my GH. Any thoughts on why this might be?? Thanks!

@AndrewFriedenberg 3 жыл бұрын

Hey, where at in the video was that mentioned?

@huihuiwong5201 2 жыл бұрын

@@AndrewFriedenberg at 18:13

@AndrewFriedenberg 2 жыл бұрын

@@huihuiwong5201 ah I see, that is a Pufferfish component. You can alternately use the Orient component OR simply use the Move component and input a Vector 2 Pt for the motion input on the Move.