Sublimation Protective Paper: What to use and NOT to use!

Рет қаралды 43,667

Күн бұрын

Are you looking for the right sublimation protective paper? What exactly is blowout paper and why do you need it? I am answering all of those questions and more in this video. We are covering butcher paper and other forms of protective paper so you can make the right decision about what works for your sublimation crafts. Can you use parchment paper? Will teflon sheets work? Find out the answer to those questions here as well! You will know what type of protective paper to buy for sublimation and make your crafting a bit easier!
Supplies: (affiliate links)
Artesprix Protective Paper shrsl.com/2ny7q
Butcher Paper amzn.to/3mLwUGQ
Copy Paper
Other videos you may enjoy:
Which Heat Resistant Tape is Best • Which Heat Resistant T...
Sublimation Supplies • Sublimation for Beginn...
Be sure to follow me on social as well!
Instagram / countrychiccottage
Facebook / countrychiccottage
Cricut Facebook group / cricutlove
TikTok / countrychiccottage
Got a Cricut machine?
Join our free 7 day Cricut class: www.thecountrychiccottage.net...
Join our Cricut community on Facebook: / cricutlove
#sublimation #protectivepaper #butcherpaper
0:00 Introduction
0:26 What is blowout paper
0:55 When to use protective paper
1:40 What to use for protective paper
4:40 What NOT to use
5:39 Why do you need it
6:55 Wrap up

Пікірлер: 193

@kylefischer9433 7 ай бұрын

You are the great explainer. So thorough and you speak slowly and clearly. Love it! thank you

@artofsymbiosis5615 2 жыл бұрын

Angie, you are soooo articulate, specific, and thorough in your videos when explaining things. I just found your channel after deciding to break down and spend $$$ on two Cricut machines (Explore Air 2 and Mug Press). Immediately I subscribed to your channel as you are no-nonsense; straight to the point yet detailed with explanations. I can't tell you how much I truly appreciate all the great information. You've already saved me from lots of frustration, wasted time and energy that I can now use toward creating! Thank you Thank you and MORE Thank you's!!!

@deserietorrez5523 2 жыл бұрын

Thank you so much for explaining the difference. I was about to buy every paper you mentioned in the video. When I fact I only need protection or butchered paper. Much appreciated.

@sharonrudesal414 2 жыл бұрын

Wow glad I watched this because I did my first project with parchment paper on top but not inside or on the bottom. My 2nd project again I used parchment paper on top but not inside and some of my 1st project was on the back of the shirt. Lesson learned. Trial and error. Learning curves for sure. Thanks for all your tutorials.

@jjfloyd8103 Жыл бұрын

I just bought unbleached parchment paper for protective paper and was about to do my very 1st mug. THANK YOU!!

@mardellgrayhek9958 Жыл бұрын

This is just what I needed and definitely helps answers all my questions. In making earrings with infusible ink, I found out how the ink can transfer onto my Cricut heat pad and teflon sheets. Thanks for this information.

@maciepearson6004 2 жыл бұрын

Thank you so much for all of your videos!!! You explain everything wonderfully and make it so easy for us to follow

@AngieHolden 2 жыл бұрын

Glad you like them!

@SandraFernandez-so5ux 2 жыл бұрын

I love watching all your videos. You are so informative, and I appreciate you!

@AngieHolden 2 жыл бұрын

I appreciate that!

@CristinaRiveraBeauty 2 жыл бұрын

Omg I'm so glad I watched this video! I got my printer and my Hiipoo ink and was getting ready to try some sublimation but all I have is butcher paper with a waxy coating!! Man Angie, it's like you read my mind sometimes. Lol. Thank you for this video!!

@AngieHolden 2 жыл бұрын

Glad I could help!

@katrinaverley9819 2 жыл бұрын

SUPER helpful! Thank you. This explains why I've been getting issues with my design using parchment paper. Thanks for the help!

@AngieHolden 2 жыл бұрын

Glad it was helpful!

@scuevas1023 2 жыл бұрын

Love your informative and especially short videos!!

@AngieHolden 2 жыл бұрын

Glad you like them!

@mavalina5930 2 жыл бұрын

Thank you so much for this video 👍🏼 for me as a beginner this is sooooo helpful 🙏🏼🙏🏼🙏🏼

@AngieHolden 2 жыл бұрын

You're so welcome!

@janelandry6584 2 жыл бұрын

Thanks for sharing. This is helpful.

@AngieHolden 2 жыл бұрын

Glad it was helpful!

@carollawhorn4344 2 жыл бұрын

Thank you! Very helpful as always.

@AngieHolden 2 жыл бұрын

So glad!

@jay2prices540 2 жыл бұрын

@@AngieHolden hello angie.so you can not you the butcher paper that is waxed on one side??

@MaddysNiftyCreations 11 ай бұрын

Thank you so much this video helps out so much

@AngieHolden 11 ай бұрын

Glad it helped!

@lisathompson9585 2 жыл бұрын

Awesome I keep a case of copy paper on hand just for this thank you for confirming that I was using the right item.

@AngieHolden 2 жыл бұрын

Perfect!

@courtnee1121 Жыл бұрын

I’m in a pinch and using copy paper… do I need to layer a certain amount of sheets of paper or just do a single layer, enough to cover the ink space from the transfer? Making my family’s Disney shirts last minute & never done suv before and now I’m panicking 😅

@MrRenoman2011 Жыл бұрын

Thanks Angie

@rosarivero9442 2 жыл бұрын

Waooooo very good information. Thank you so much

@AngieHolden 2 жыл бұрын

Most welcome!

@deserietorrez5523 2 жыл бұрын

FYI I am absolutely NEW to sublimation printing. Trying get get all my supplies before my Sawgrass gets here. 😊

@daniellem7583 Жыл бұрын

Thank you 🙏

@AngieHolden Жыл бұрын

You’re welcome 😊

@mw42oakie 2 жыл бұрын

Hi Angie, love the video very informative. I would like to know if you can use the White Paper Roll from Hobby Lobby. Tfs!

@AngieHolden 2 жыл бұрын

Maybe? I am not familiar with it!

@lindalaney2642 Жыл бұрын

How can I tell if there is a coating or not? I've read all comments & can't find an answer. Thanks for all your answers. I'm so impressed with you, Angie. You are an amazing teacher.

@AngieHolden Жыл бұрын

Other than it saying uncoated when you buy I am not sure.

@yvettevcintron7827 Жыл бұрын

@@AngieHolden Will it have a wax coating on one side? I recently bought "butcher paper" from hobby lobby and noticed it had a wax side.

@fionacollier1386 2 жыл бұрын

Can you recommend a protective paper available in the UK? Thank you

@Crafts-and-cocktails 2 жыл бұрын

WOW. Can you tell all those people who told us Teflon and parchment work?! Angie your first in person training I’m there! You explain so much better than most. Thank you. I did buy the butcher paper and I do like it a lot better. Next question is it ok to cover your plates of your heat press with the Teflon?

@AngieHolden 2 жыл бұрын

I don't cover mine with Teflon. I just put this on top every single time.

@selinajanie 2 жыл бұрын

I cover mine with the teflon it helps to prevent scorching

@amywatters6954 2 жыл бұрын

Thank you for this informative video. Would you happen to have a link to the roll holder you use for your butcher paper? Thank you again, for this and for all the videos you share with us!

@AngieHolden 2 жыл бұрын

Hmmm. I am not sure if I do. You would want to get it to fit the exact roll of butcher paper you buy though.

@anaharden9887 Жыл бұрын

Thank you! Thank you!!! Much needed information and details. Your the greatest!

@AngieHolden Жыл бұрын

Thanks for watching!

@lynnmangrum7823 2 жыл бұрын

Angie thank you for your very helpful cricut videos! WHY COULD YOU NOT USE THE BROWN BUTCHER PAPER, OR THE CRAFT COLORED MAIL WRAP PAPER? I have only made one mug press project so far and I used the parchment paper you recommeded NOT to use, OOPS! My project turned out great but there were scorch marks on the paper. Maybe it was from trapped moisture? ID really like to hear your opinion on the brown paper. I know ill try it but if you respond it may save me a wasted project! LOL, THANK YOU FOR SHARING YOUR WORK!

@roxaneokumura-dickinson4206 2 жыл бұрын

Hi Angie, i jus saw your video! I love your tips!! So, what about the butcher paper that comes with the cricut infusible sheets? Do I use them and how do I use them??

@AngieHolden 2 жыл бұрын

Yep! Butcher paper works with those! You can see more about Infusible Ink here: kzfaq.info/get/bejne/op2PrMVex9W5eHU.html

@lhodeniz 2 жыл бұрын

I was really confused about this. some are selling "teflon sheet for heat press" what you said "Don't use it!".Thank You

@AngieHolden 2 жыл бұрын

I use teflon sheets for pressing HTV on my heat press but I don't use them for sublimation.

@ruthybarretta7955 2 жыл бұрын

I use 2 sheets works great and cheap

@angelinahernandez9907 Жыл бұрын

Hello thank you for your awesome videos wondering if General Purpose Masking Paper my husbands a painter wondering if I should go snag that lol or I also found he had Builders Paper feels like Kraft Paper the masking paper is a bit thinner any idea how that would work both are brown ❤thanks again

@AngieHolden Жыл бұрын

Not sure. I don't use brown paper but I have seen others that do. I would think the masking paper.

@WolfHawkProductionsllc 2 ай бұрын

Oh Dang, I was told to use Teflon paper or parchment paper after driving to two Walmart stores and Hobby Lobby, I was over annoyed at hearing "Sales clerks" tell me those were fine for sublimation as well as sounding like they have no idea what they are talking about.

@AngieHolden 2 ай бұрын

I would NOT use Teflon. Parchment would work in a pinch but I am not a fan.

@WolfHawkProductionsllc 2 ай бұрын

@@AngieHolden 😔

@faithful021 2 жыл бұрын

I actually subscribe to your channel very educational and informative. I am from the Caribbean trying to do my own t-shirt business what would you recommend for the best heat transfer paper? I am new to cricut need as much information as possible.

@AngieHolden 2 жыл бұрын

I like printable HTV best. You can see more here: kzfaq.info/get/bejne/q9B-orKb0rfdmqM.html

@ladylaiicustommore5048 6 ай бұрын

❤❤❤❤Thank u

@AngieHolden 6 ай бұрын

You are so welcome!

@user-lq7os1og7k 4 ай бұрын

Thank you for all your useful tips. I have a couple of questions. On my first time trying sublimation on 2 tumblers. no ink transferred on to the tumblers? I watched a lot of videos and followed the instructions to the letter. I used a Hamilton Beach toaster oven. Any idea what I could have done wrong? I just ordered the HTVRONT tumbler press and I'm going to try again. Instead of shrink sleeves I need to use butcher paper. I don't have white but have a bunch of pink butcher paper that is not uncoated , should I avoid using pink ? You recommended only using white, so should I just use copy paper for now?

@AngieHolden 4 ай бұрын

If it is not transferring, you either don't have a sublimation ink or you don't have a sublimation coating on the tumbler. Only those two things could be the issue.

@sillylittleartythings1072 2 жыл бұрын

Thank you so much for this video. I live in the UK and options are incredibly thin on the ground. Is it possible to use brown butchers paper, or does it have to be white? Many thanks.

@AngieHolden 2 жыл бұрын

I am just afraid the brown may stain at the high temperatures. That is why they always say to use white.

@selinajanie 2 жыл бұрын

I use copy paper and then my teflon sheet over the copy paper and it works great. It helps to not get scorch lines

@AngieHolden 2 жыл бұрын

Does ink not get on your teflon sheet? Also a teflon sheet is actually NOT recommended over the top of sublimation.

@selinajanie 2 жыл бұрын

@@AngieHolden nope I have never had an issue with ink and I have used the same teflon sheet for a few months. I'm a small business so use it regularly as well. I use the blow out paper and then the teflon sheet on top of that. I have actually found that it helps prevent scorching

@AngieHolden 2 жыл бұрын

Oh got it. The blowout sheet is catching any ink. It actually traps moisture which is why they say not to use it.

@natalieferguson7685 2 жыл бұрын

Thank you all your videos are so helpful 💖 unfortunately can't find these in the uk... could any one recommend rolls of blow out paper that u can get here? Could I use the White Paper Easel Roll from hobbycraft?

@AngieHolden 2 жыл бұрын

Ugh. I am not sure? I assume that is just regular paper on a roll with no coating? It should be fine then.

@natalieferguson7685 2 жыл бұрын

@@AngieHolden thank you so much for getting back to me x

@vivianmiller2501 2 жыл бұрын

I enjoyed your video> Question: Can you substitute freezer paper for butcher block paper ?

@AngieHolden 2 жыл бұрын

Definitely not. Freezer paper should not be used here.

@oldgreymare1960 2 жыл бұрын

Hello Angie! I had purchased some 18" X 175' Kraft paper. Can I use this for any type of sublimation?

@AngieHolden 2 жыл бұрын

A white kraft paper would probably be fine as long as it doesn't have any coating on it.

@heidibowling9605 2 жыл бұрын

Hi Angie! Quick question... Is there a difference in using white butcher paper vs the brown paper or my local store has a pink butcher paper. Just wondering if I NEED to get the white or if the others will be okay. Thank you for all the info you share in your videos!!!!!!!

@AngieHolden Жыл бұрын

I don't use any colored paper as the color can transfer at high heat.

@suziedube9584 10 ай бұрын

Hi there Angie! I see in some videos, you can use Parchment paper in the mug press. Is it safe? If si, do I have to tuck it under the mug and cut it so it is above the top of the mug. Hoping to hear from you soon! Susan D

@suziedube9584 10 ай бұрын

Thanks so much Angie! I will NOT use Parchment paper!

@AngieHolden 10 ай бұрын

I use protective paper or butcher paper in the mug press all the time. It is safe!

@tarataylor936 2 жыл бұрын

I see some people using painters tape instead of a protective paper do you prefer the protective paper over the tape or have you tried the painters tape method? Trying to get some learning and understanding of sub tumblers before I venture into it

@AngieHolden 2 жыл бұрын

I have never seen or heard or someone using painter's tape over their design. I think it could melt and damage your surface.

@ellencronin9905 2 жыл бұрын

I’ve been using parchment paper. Will there be an issue with the mugs I’ve already made? Also how many layers of butcher block paper or copy paper do I need on a mug going into Cricut mug press? Thank you

@AngieHolden 2 жыл бұрын

No issues at all! If you are using sublimation paper or the Cricut Infusible Ink transfer sheets, one layer is good. If you are using copy paper, three layers.

@gracieannweim5812 2 жыл бұрын

Hi Angie What do you think about Bryco Goods White Kraft Butcher Paper Roll - 18 Inch x 100 Foot White Paper Roll

@AngieHolden 2 жыл бұрын

As long as it is white and unwaxed, you should be fine!

@fightdecals Жыл бұрын

We use Teflon sheets and baking paper in our shop, never any issues so when people post vids like this I’m guessing it’s more of a personal experience they went through themselves and viewers will get like minded over it. And always start with left chest prints first, then the back last. If you have to use a paper underneath, you’ll use smaller pieces.

@AngieHolden Жыл бұрын

Great tip!

@robinjohnston376 2 жыл бұрын

You are my “Go To Gal”. Question….can you use the paint paper at Michaels that comes in the big roll? It’s aimed at children’s crafts, but seems similar to butcher paper.

@AngieHolden 2 жыл бұрын

I would say as long as it doesn't have a coating, you would be fine with that.

@hollymoyer1272 Жыл бұрын

Angie, if my heat press is 16x20, should I cover the entire bottom of the platen and the entire top with blowout paper? Or do I just use a little larger than the logo size?

@AngieHolden Жыл бұрын

I usually size to my project. Just make sure all ink from the paper is covered.

@saraevans9187 2 жыл бұрын

Does the butcher paper need to be white? My Walmart only has pink in stock to pick up at this moment. I am making mugs and then printing to put on shirts - so that's already on copy paper - would I just put additonal copy paper on that? Tia for answering!

@AngieHolden 2 жыл бұрын

I recommend white as I don't know if the pink will bleed once heated.

@auntienikkisgamin9251 2 жыл бұрын

Does Teflon sheets and pillows trap or block heat? I've seen other KZfaqrs mention them so I brought some

@AngieHolden 2 жыл бұрын

You use the pillows UNDER the shirt to prevent press lines so it doesn't need to release moisture in that case. You can see more here: kzfaq.info/get/bejne/ieCpedaXnZvZpp8.html

@joshuacarlos2241 2 жыл бұрын

Hi what kind of printer do you recomend to print sublimation? Thanks

@AngieHolden 2 жыл бұрын

Try this: kzfaq.info/get/bejne/Y8xkoqtj3ZOypWQ.html

@judysimonson8095 2 жыл бұрын

I use unbleached parchment paper and it’s working the same as butcher paper. Does this normally hold the moisture as well as standard parchment paper?

@AngieHolden 2 жыл бұрын

I personally don't use parchment.

@sunnybaeza8385 2 жыл бұрын

My shirts are turning yellow when I sublimate with the Sam’s butcher paper. What am I doing wrong? I use the Cricut heat press at 400 degrees, for 60 seconds. I even use the lint roller beforehand.

@AngieHolden 2 жыл бұрын

What are the shirts made out of?

@charlottesills1174 2 жыл бұрын

Angie, if you have 1 kind of Sublimation ink in your printer can a different kind be added?

@AngieHolden 2 жыл бұрын

To switch inks, you would need to completely drain and flush the printer.

@bkaohi Жыл бұрын

Hi Angie, I’m not sure if you were asked this already but, I have a question in regards to sublimating polyester shirts…I made the mistake of using parchment paper and the ink from the design stained it. I continued to use the same parchment sheet and the ink then transferred to the next shirt I pressed. I ended up messing up a bunch of shirts not realizing what was happening. I plan to get some butcher paper or copy paper but I wanted to know if I need to change out the top blowout sheet (that covers transfer) each time?

@AngieHolden Жыл бұрын

If you get any ink on the paper, you want to change it regardless of paper type. I check my paper each time and reuse only if there is no ink.

@bkaohi Жыл бұрын

Thank you!!

@candicestrobert8608 Жыл бұрын

Hi Angie, Is there any type of protective paper that can be reused?

@AngieHolden Жыл бұрын

I get the most uses out of Artesprix protective paper. Any of it can be reused as long as there is not ink on it. I just have an issue with the butcher paper turning brown.

@joelblumenstock1183 Жыл бұрын

I bought some butcher paper on amazon and it was too thin, needed 3 layers for it to work. Im currently returning the paper I bought but all the butcher paper found on amazon for sublimation has reviews that say its too thin! trying to find a solution where I can just use one sheet to speed up production time. the artesprix paper sounds good but they come 12inches by 15 feet, which is an inch too short if im going to print 13 x 19 paper. don't know what to do

@AngieHolden Жыл бұрын

I know Artesprix is coming out with more sizes but I am not sure what those will be!

@ItsKi_Kreations Жыл бұрын

thanks for the video 💙 i get scared using different paper(s) thinking i’ll cause a fire

@alisonjordan1152 2 жыл бұрын

Just watched this film and it was good downside is I’m in the U.K. and I can’t find the artesprix paper and the butcher unwaxed on Amazon is £47, about $60 US dollars Would anyone who is in the U.K. know what paper to get for doing sublimation to protect your blowout? Would love to know what people use. Due to visit family in the USA next year once the U.K. is allowed in, I guess I will be buying the shops out and get my aunt going to her SAMs shop with a list. Thank you for the video I found it very useful and the only one Iv seen explaining what you need, now will have to go hunting

@AngieHolden 2 жыл бұрын

I saw one person say there is a just regular paper on a roll at a art supply store. As long as that is not coated, I think it will work!

@alisonjordan1152 2 жыл бұрын

Thank you Angie

@ghost_gangster4650 2 жыл бұрын

I'm new to sublimation. I have a small sub print that I'm putting on my sub tumbler. Can you tell me how I should tape it down or what I should do

@AngieHolden 2 жыл бұрын

What are you using to press it? Yes you should tape it down but if you are using an oven, I would also recommend shrink wrap.

@ghost_gangster4650 2 жыл бұрын

@@AngieHolden I have a cup heat press and an oven. If I tape it down and use the heat press do I need Nything else. I don't know the temp and seconds either

@AngieHolden 2 жыл бұрын

Just tape is fine for a press then put protective paper over it. For the oven, I would add shrink wrap. Always look on the website where you purchased the tumblers to see what they recommend for time and temperature.

@aprilmost Жыл бұрын

Are use uncoated parchment paper. Every single time works great for me.

@AngieHolden Жыл бұрын

I don’t like parchment paper of any type.

@janicelindsey842 2 жыл бұрын

what about non coated parchment paper and can you use a silicone mats

@AngieHolden 2 жыл бұрын

I would not use parchment or silicone mats.

@kristyboldizar 2 жыл бұрын

Do you clean your heat press after doing sublimation?

@AngieHolden 2 жыл бұрын

Nope! This paper keeps it clean.

@Tina-Hougaard 2 күн бұрын

I have searced for butcher paper and i found Rolls with No coating of any kind 100% natural but all of The Rolls i find is pink, Can i use that when i sublimate because you Said it should be White and i cant find any Rolls in just White ?

@AngieHolden 2 күн бұрын

I don't like to use the colored ones as the colors can migrate at high temperatures.

@simonsayzcreations9140 2 жыл бұрын

My store has pink butcher paper that is in coated. Do you think I could use this without the pink transferring to the shirt?

@AngieHolden 2 жыл бұрын

I choose not to use the colored paper so I don't risk the transfer.

@simonsayzcreations9140 2 жыл бұрын

@@AngieHolden ok thank you

@taravaughn3852 Жыл бұрын

Any tips on removing bleed through on shirts? 😭 I’ve always used Gildan shirts and never had an issue with ink bleeding through to the back of the shirt, but I’m working on a large order now with Bella Canvas shirts and every single one bled through! PLEASE HELP!

@AngieHolden Жыл бұрын

There isn't anything you can do after it happens. SORRY! Be sure to always put something inside.

@taravaughn3852 Жыл бұрын

@@AngieHolden I didn’t think so. I was just hoping maybe there were some trick I hadn’t heard of lol. I’ve done hundreds of shirts and never had this happen before, but I will definitely be using paper in between from now on. Thank you for the response!

@catherineevans1927 2 жыл бұрын

Hello! Can I use copy paper with my mug press?

@AngieHolden 2 жыл бұрын

You can use it as protective paper. I wouldn't use it to print on.

@Shanpagne99 2 ай бұрын

I’ve been using parchment paper this whole time and nothing wrong with Wow

@Natural50lady 2 жыл бұрын

Amazon is out of stock, any other recommendations for the butcher paper?

@AngieHolden 2 жыл бұрын

I am seeing some in stock. Try just searching butcher paper on Amazon and look for the ones that are white that are uncoated.

@scoopacekc 2 жыл бұрын

where did you find a roll holder for the big buyer paper roll?

@AngieHolden 2 жыл бұрын

I have one from Amazon that fits the roll I bought. Not sure how big your roll is.

@scoopacekc 2 жыл бұрын

@@AngieHolden It's 20 inches or so from Sam's Club.

@AngieHolden 2 жыл бұрын

Yea the one I have is NOT going to fit that roll.

@stephc3513 2 жыл бұрын

Hi, I purchased the protective paper from artespritx but its stains the shirt yellow. I use 400 degrees for 60 seconds on my commercial heat press. What am I doing wrong?

@AngieHolden 2 жыл бұрын

I have been using this for years and have never had an issue. I heat it to 400 degrees several times. What material are you pressing on?

@stephc3513 2 жыл бұрын

Angie Holden I did 50 poly /50 cotton

@4vercat 2 жыл бұрын

@@stephc3513 The minimum poly count should be 65%. The higher poly percentage the better.

@TamiHummel Жыл бұрын

Can we use white cardstock paper as well ?

@AngieHolden Жыл бұрын

That is not ideal.

@TamiHummel Жыл бұрын

@Angie Holden ok thank you. Jennifer Maker said it was ok so I was just trying to get another opinion on it.

@shakiragonzalez7394 2 жыл бұрын

Why can't I username the peach butcher paper if it is uncoated? Does it damage the fabric?

@AngieHolden 2 жыл бұрын

There is a chance the color can transfer to your surface under the high heat.

@Xtercia 2 жыл бұрын

Still not sure what the difference is between the blowout and protective. Do I need both or just one of them?

@AngieHolden 2 жыл бұрын

It is the same thing.

@KatPlayzIt 2 жыл бұрын

Where do you get holder for the Butcher paper?

@AngieHolden 2 жыл бұрын

I found one on Amazon.

@Abby2240 2 жыл бұрын

Why is the sublimation heat transfer paper sticking to the peel mask when i press it? please help

@AngieHolden 2 жыл бұрын

Not exactly sure what you are trying to press but you can use water to remove any paper.

@tiffanyspence4906 2 жыл бұрын

In another video you used Teflon pillows to prevent lines on fabric and you said it wipes off, so I’m confused why the sheets are different.

@AngieHolden 2 жыл бұрын

I actually covered those with protective paper as well.

@tiffanyspence4906 2 жыл бұрын

@@AngieHolden I see. Thank you. I ordered unwaxed butcher paper. I’ve never sublimated before so time to try when it gets here.

@zindelvazquez2954 2 жыл бұрын

Can you re-use the butcher paper after every use? Or do you have to toss it out after every sublimation?

@AngieHolden 2 жыл бұрын

I reuse my protective paper as long as there is not any ink on it.

@zindelvazquez2954 2 жыл бұрын

@@AngieHolden Thank you!

@K_Wolff 2 жыл бұрын

Can you reuse the butcher paper and if so, how many times?

@AngieHolden 2 жыл бұрын

I reuse as long as it doesn't have any ink on it.

@hazelann63 2 жыл бұрын

Link for purchasing?

@AngieHolden 2 жыл бұрын

In the description below the video. On computer, click show more. On mobile, swipe up or click on arrow to expand.

@Nancy-fh2yc 2 жыл бұрын

My white butcher paper burns and sticks to the 100% polyester material ... heat press at 350 for 45 seconds medium pressure ... what am I doing wrong ?

@AngieHolden 2 жыл бұрын

I have literally never had butcher paper burn. Is it coated? You should always get uncoated.

@fanc1973face 2 жыл бұрын

@@AngieHolden I think my press was set in Celsius n I was putting it in F also was experimenting on a pillow case that was 100% polyester some say not to use that - I tried just reg plain paper as protective sheet n it worked - now to get the colours fixed up 🤦🏻‍♀️

@Jessica-wl3of 2 жыл бұрын

Help! I used Teflon because another video said to. They also said not to put anything between the shirt ugh. Can I use copy.paper on top and in between? The paper won't catch fire?

@Jessica-wl3of 2 жыл бұрын

Oh also did I ruin my heat press? Because I reused the Teflon and I saw some went on the shirt

@AngieHolden 2 жыл бұрын

I just look at my copy paper and make sure it says on the back that it is okay to use in a laser printer or copier. That means it can withstand the heat. You didn't ruin the press but if any ink got on it, you will need to be really careful for a while until it wears off. Add extra paper.

@Jessica-wl3of 2 жыл бұрын

@@AngieHolden thanks a bunch. I went to dollar store and got white packing paper. I used it and it didn't catch fire. But I have copy paper I will have to read the package. Have you ever used packing paper before? I saw on another video this lady said paper from U-Haul will work or may have been your video. Sorry I've watched so many. The paper did leave an imprint and it had a paper smell. But no burn marks just an imprint of the project I did

@Jessica-wl3of 2 жыл бұрын

@@AngieHolden I should also mention it says Kraft paper on it as well. Fingers cross I don't burn down my house 😂

@brittanybrunt1642 Жыл бұрын

Hi is copy paper the same as printer paper

@AngieHolden Жыл бұрын

Yep.

@dianepopovice5317 Ай бұрын

I see the Artesprix butcher paper for sale on Amazon, but instead of "white" , it says "neutral". It looks possibly "off-white"? Sis that ok to use, or does it need to be truly white?

@AngieHolden Ай бұрын

Yep that is fine!

@annettemcneil-smith550 2 жыл бұрын

Why does the butcher paper have to be white? Would brown craft paper work?

@AngieHolden 2 жыл бұрын

With the intense heat, color can transfer from anything that is not white.

@acousticartisttheresawilli4204 2 жыл бұрын

How about white cardstock instead of copy paper?

@AngieHolden 2 жыл бұрын

It should be thin for the top layer. You can use cardstock on the bottom.

@angelafeist8416 2 жыл бұрын

Also on the 'Do NOT Use' list is freezer paper and wax paper.

@AngieHolden 2 жыл бұрын

Definitely!

@davidm8046 2 жыл бұрын

Hello! Has anyone ever used pain newsprint paper?

@christianholstein194 7 ай бұрын

I'm in search of reusable blowout paper. Save money and help the environment and what not. So like 2 sheets that would be used forever lol anything like that?

@AngieHolden 7 ай бұрын

Nothing that good as you need to get rid of it when you get ink on it. I can use the Artesprix paper more times than anything else without it browning.

@ruthybarretta7955 2 жыл бұрын

Why can you not use Teflon

@AngieHolden 2 жыл бұрын

It doesn't release moisture and if you get ink on it you just ruined a pretty expensive item.

@selinajanie 2 жыл бұрын

I use a teflon sheet on top of my blow out paper. I have found that it helps with scorching