Another 4-8-4 Steam Locomotive goes under the knife. Maybe I'll have better luck this time. Amazon: www.amazon.ca/hz/wishlist/ls/... Patreon: / scottrails You can contact me directly at scottrodsgarage@gmail.com
Пікірлер: 40
@user-df6ld5rg3q2 ай бұрын
Another great video series Dave. Between you, Harrison at SMT Mainline, and Ron at Classic Model Trains, I am staying away from steam locos, way too fiddly. And if I ever change my mind it will definitely not be Bachmann. Take care, Jeff.
@johnparker7874Ай бұрын
That steam locomotive has better dance moves then the Rockettes
@jefftomashunas79132 ай бұрын
Check out Ron's Classic model Trains he just fixed these. There is a gentleman that he found that 3d prints the gears for this!
@joeraderblackrockcentralrr2 ай бұрын
Better luck than yesterdays. At least you know what the problem is. Now up to customer to get the parts' Thanks for sharing
@ModelTrainOutsider2 ай бұрын
Man, hard to strike out twice, but sometimes, there is no saving the patient. Nice walk through on both attempts.
@majmikecalnan2 ай бұрын
The smoke unit opening has to face up towards the chimney.
@ScottRails2 ай бұрын
Yes, I noticed that after watching another video. Someone has obviously been in here before me.
@johnbanicki72322 ай бұрын
Sounded like my wife's sewing machine when it was running. Hope you can find the gear and insulators. Thanks for sharing.
@ScottRails2 ай бұрын
hahaha, that's exactly what I was thinking.
@theangelsmodellingandrailways2 ай бұрын
Lumpy indeed, but you got it running. Yeah, i agree bud, new insulators and that'll run a lot smoother.
@plutoyaldnil47502 ай бұрын
I know it's a pain esp since glued to wheels but......if you had glued 1/2s of insulators together then put them on a square shaft....you could have put them in a drill and sanded them till they were smooth
@ScottRails2 ай бұрын
They are way too brittle for that sort of machining. I had to re-glue them several times before I even got it to work at all.
@HHExpress2 ай бұрын
At least it wiggles around the track 😉
@hopstrr2 ай бұрын
Check with Ron @ Classic Model Trains, I think he found a fella that 3D prints them
@jefftomashunas79132 ай бұрын
I second this!
@user-qx4zf6eo8z2 ай бұрын
Suggest you contact KZfaqr at Classic Model Trains. I’ll bet he has the parts or knows where to get them domestically NA.
@DarrellNorton-gq2ic2 ай бұрын
Unfortunately the split gears on older bachmanns seem to be more common than not having them split. Only ever bought 2 second hand and exactly the same issues. Not so bad to deal with over the pond as there's better access to athearn gears to rectify the issue. In the UK it's a chore trying to find them without having to order from the states
@maltnz2 ай бұрын
Yeggi or Thingverse have 3D print files for resin replacements of the plain axles. Search for Bachmann Axel Replacement (note the spelling of axel) or Bachmann LNER Class. Might have a drive gear but did not see one.
@w.rustylane56502 ай бұрын
Bachmann engines especially those with the split chassis usually have split gears to boot. I stay away from Bachmann. You cannot super glue Bachmann cracked gears. Darth Santa Fe epoxied the gears on the Bachmann he was working on and it worked out pretty well. Ron from Classic Model Trains made metal sleeves to go over the axles. Very bad design by Bachmann. Cheers from eastern TN
@BriansModelTrains2 ай бұрын
Great effort again. Thanks for sharing.
@dirkstrains2 ай бұрын
That loco is worth no more than $20 WHEN it was working. That is why they call it Botchmann! JUNK.
@koschkaschroeder6791Ай бұрын
nice work. i have also some of these bachmann 4-8-4 with the same problems. and i ordered also in the uk but: it wasnt working. that were 3d printed things, and the guy, guees called peter, told me, that the bachmann article numbers in the uk were different from that in the us - for the same article. so, save your money. bachmann itself dont produce the anymore since 20 years or so. but if you find some on shapeways - there were some wich worked after filing them a bit because they are way tho small and so they break easily... the method of ron from rons calssic trains is even better but its not the first one who tried and was succesful. very thin rings pushed over the broken gears.
@larmo56332 ай бұрын
Never had luck with any of the Bachmann line, the plus, and spectrum line all still had drivetrain issues..fix it, then never use it that way it always works..I'd rather purchase a 40+ year rivarossi locomotive then a new Bachmann..
@caboosech2 ай бұрын
The little box that you pulled out is a smoke unit
@NZMOPAR2 ай бұрын
I wonder if there is a 3D file online to print them Dave with your resin printer
@ScottRails2 ай бұрын
My resin is too brittle for the job.
@philhamsher39772 ай бұрын
Can't win them all. Good try though... :0)
@robindow57422 ай бұрын
Hi Daye Peters Spares keep replacement axeles for bachmann locos not sure if they keep north american loco set though sure an email to them wil give result
@SoRTs62332 ай бұрын
Split gear axles is a perennial problem with Bachmann, I get it a lot with N gauge. If you have the part number, I could try to get them for you and post them? If it helps! Cheers, Jim L
@monsvillerailways57362 ай бұрын
Kinda running Dave. Parts internationally are a problem for all of us.
@GrimmBrosHobbiesАй бұрын
Hey Dave! I have a new video on my channel after 2 and a half months and lots of encouragement from you and the others in the live chat! Thank you very much! Also, quick question; when is the next livestream? are you going to do a sunday livestream on May 12?
@ScottRailsАй бұрын
Hey Grim. Yes, Live Stream Sunday 12th at 8pm
@GrimmBrosHobbiesАй бұрын
@@ScottRails Hooray! best thing is, you're in eastern time so im 2 hours behind you, so i can watch a good part of the stream before i have to get to bed. Thank you very much for encouraging me to start my channel!
@GrimmBrosHobbiesАй бұрын
@@ScottRails i might buy you the CSX hopper *hint hint wink wink*
@andrewholmes83372 ай бұрын
Well you got punched by the bachmann curse I thought that maybe a PVC plastic dowel could be turned on a drill with files and drilled To a diameter just smaller than the square segments end to long end then whith a square jewelers file open the hole and epoxy into place if this interests you I have an idea on the gear return a message and I'll tell you
@bigwoz78Ай бұрын
Bachmann split frames suck, they should be ashamed of themselves for making a terrible product