Yup, I brought that up in the video. Proper pipe with back pressure can help it work but if it idles and revs up, good enough for now. Nothing says down the road a rotary exhaust valve won't be made for this, it's actually feasible.

Yes anything is possible, the most successful supercharged. Two stroke was a banshee that ran fairly well, but it didn’t make more power than it did before. The bike ran a preformed, but with the valve in the exhaust essentially acts as a tuned pipe to control fuel charge. Putting a valve on the intake and exhaust, the tuned pipe no longer has an effect on the charge. You might be able to make an exhaust valve that is very similar to a read valve for the intake, and that might work, you’d have to tune the pedal thickness to eventually get the right power curve, but it might be very simple

@@nathansumerlin8391 for now, just after it to be a show peice and eye catcher to grab peoples attention at shows. It's like a Ford flat head v8...can sound fast and look fast, but it ain't.

I think with low boost and right pipe it's a maybe

@russell.gibson I'm after just that, a maybe. If anything it will make alot of noises.

Im on and waiting. I have a story to tell

@@mistermacgray I lagged give a sec

Had to restart full console

He said if u apologize, he will apologize other than that he's good

@@TastyDustbin he was the one yelling at me over a game, I wasn't in the wrong. He knows how to contact me.

I am aiming for running,that is it. Shouldn't need a blow off valve as most will blow out of the exhaust lol.