Hi, I have tested my solenoid and I think its good... I have all the symptoms of your video. Gauge looks exactly the same with code 12, engine light flashes when pushing start button but just clicks. I will say I did do something and fried something I think due to my negligence. I bought a new battery with too high of a CCA and put it in and started it and the bike didn't like it and fried something, I am not sure if I fried my starter or if its still good but after that battery incident I now have code 12. I did fry 1 fuse which I replaced it was the 7.5A one in the fuse box. Can this code 12 be due to a bad starter or is it only related to this solenoid?
@gnomerebel2 ай бұрын
This is on a 2014 Yamaha R1
@RollinThundervlogs7 ай бұрын
Hi, do you have a link to the replacement starter solenoid? My 2013 R1 is doing the same thing, help! 🙏
@TwoBuddiesFabrication7 ай бұрын
Hi buddy sorry no link got this from one of our suppliers here in the UK
@Save134 ай бұрын
Hi, I have a Yamaha FZ6 that has the same error and an additional symptom: while riding the battery randomly disconnects and I just have to lift up the fuel tank to reach it and slightly press on the starter relay and the battery is reconnected. I replaced the relay, the bike started 2-3 times and the next morning it does not start again, code 12 again… Do you think the issue can be the plug that is inserted in the starter relay?
@TwoBuddiesFabrication4 ай бұрын
Hi, it sounds like you have a connection issue! Was the relay genuine or after market? Sometimes the after market ones are junk.
@Save134 ай бұрын
@@TwoBuddiesFabrication thanks for the reply, the relay was after market, but I have just went to a mechanic and unfortunately the issue seems to be the starter motor :) I will just buy a new one and this should fix the issue
@TheSharkMohanty9 ай бұрын
Hi, need your help. My R1 05 is starting but shuts off after 5 secs and throws 12 code.