Putting a Rotrex Supercharger with intercooler on my BMW E46 328i This is a car I use for drifting and practice on events, both summer and winter.
Пікірлер: 37
@cdeprima12095 ай бұрын
Power steering not required on those cars, I heard intercooler not really needed either; just helping to make those upgrade easier and cheaper! cheers! :)
@mariuslaspaas5 ай бұрын
I would not go drifting without powersteering pump. Yes IC is not required. But it's preferred to have it. The IAT gets hot on track.
@FlexinJump Жыл бұрын
snyggt bygge! ladda gärna upp mer när du kör med den
@mariuslaspaas Жыл бұрын
Takk. Ska forsøka ladda upp från vinter och sommer körning :)
@vertex61367 ай бұрын
Hello, could you send me photos of how you connected the compressor to the throttle and where you have the flow meter. Regards
@mariuslaspaas7 ай бұрын
It's out from compressor. Through intercooler and then up into the throttle. The flow meter i have in front where the headlight is.
@laylowlayslow728310 ай бұрын
Where'd you get the bracket for the supercharger?
@mariuslaspaas10 ай бұрын
It's from this place www.schaper-automotive.com/en/
@antoniodavid67755 ай бұрын
Donde puedo conseguirlo
@thefelix1100 Жыл бұрын
why did you went with supercharger and not turbo? Thinking about the same for my drift practice car
@mariuslaspaas Жыл бұрын
Well. I did it because I found it easier. Also if you watch my other videos I have a project with turbo and more power in my volvo940. So it made me want to try supercharger on this one 😊
@acef_performance841611 ай бұрын
I've had my supercharger for a few years now and reliability is great
@mariuslaspaas11 ай бұрын
@@acef_performance8416 What boost your running? HP? Stock engine?
@g.g48167 ай бұрын
kompresor is more natural
@mariuslaspaas7 ай бұрын
Yes
@andreioctavian45942 ай бұрын
What size is the serpentine belt, or maybe you have a part no, thanks.
@mariuslaspaas2 ай бұрын
You need to adjust this out from what type of idle wheel you are running on the charger
@winha14353 ай бұрын
What injector model and parts you used? I have rotrex at shel waiting to install but stock injectors cap bretty soon and afm only read 750kg/h so around 270hp befor it goes over the map?
@mariuslaspaas3 ай бұрын
I have upgrade injectors. But only to 440cc I think it was. I know I mentioned it in the video
@winha14353 ай бұрын
@@mariuslaspaas You did but bag says siemens s-400 and you talked about bosch. I was intrested the model they are if they are straight blug in so i can do price comparison.
@mariuslaspaas3 ай бұрын
@@winha1435 yes. Sorry I didn't realise I said Bosch intill now. The injectors are Siemens. But the plug is Bosch. They are direct swap. Siemens nr 9470199
@winha14353 ай бұрын
@@mariuslaspaas these are really nicely priced, i just find hard source injector dead times and spesific data for these.
@mariuslaspaas3 ай бұрын
@@winha1435 yes. I know. Not much data on them. Maybe because they are used oem on volvo and saab i think.
@ruffraff4697Ай бұрын
Hello what compressor is it? Rotrex model?
@mariuslaspaasАй бұрын
It's a c30 94. A bit older charger.
@kayra484011 ай бұрын
From what car do you use super charger?
@mariuslaspaas11 ай бұрын
It's a Rotrex supercharger. It's not taken from a car, but it's possible to buy a kit for different cars. 😊
@acef_performance841611 ай бұрын
Mine car is using a Vf engineering supercharger
@mariuslaspaas11 ай бұрын
@@acef_performance8416 What engine You're running?
@havrancsikgabor8082Ай бұрын
how was the ecu program written?
@mariuslaspaasАй бұрын
It's made by fekzen.se in sweden
@freshchicken93546 ай бұрын
How many HP does it make?
@mariuslaspaas6 ай бұрын
Haven't dynoed it yet. Maybe about 250? I will add some more boost and have it on a dyno before the summer.