Supra Complete Teardown and Strip

Рет қаралды 1,336,789

Күн бұрын

Step 1 to the full competition drift car build is the teardown.
Step 2 is designing parts: • 2020 Drift Supra CAD D...
Step 3 is the install: • 2020 Drift Supra Powde...
...and Step 4, the dyno test: • 2020 Supra Drift Build...
Watch the engine build here:
Supra Engine Teardown: • 2020 Supra B58 Engine ...
Engine Build Playlist: • 2020 Supra B58 Engine ...
*Subscribe to be notified when the next videos are released.
T-Shirt and Titanium keychains: papadakisracing.com/
FOLLOW ME:
/ stephpapadakis
****
More drift team videos:
• Front Wheel Drive to RWD Conversion: • Drift Car Build FWD Co...
• 1007 HP dyno pull: • Dyno Toyota Corolla RW...
• 1000 Horsepower Engine Teardown: • 1000 Horsepower 4 Cyli...
****
ABOUT PAPADAKIS RACING:
The Papadakis Racing team began drifting in 2004 and is the most winning team in Formula Drift history, earning the 2015 title with driver Fredric Aasbo, as well as backto back championship titles with driver Tanner Foust in 2007 and 2008. The Rockstar Energy Drink / Nexen Tire Toyota Corolla Hatchback is the latest competition build from the Hawthorne, California, based team.
Team owner Stephan Papadakis is a legend of sport compact racing who began building his reputation in the 1990s with the first front-wheel drive, tube-chassis drag car in the U.S. The team earned multiple records and championships in the discipline, turning in elapsed times and trap speeds previously thought unattainable in front-drive drag cars. Papadakis' successes in front-wheel drive were matched by his efforts in rear-wheel drive when he campaigned a Honda Civic that became just the fifth car to join the NHRA's Sport Compact 200 MPH club

Пікірлер: 1 500

@pec1739 4 жыл бұрын

i like how everything straight to the point and no BS

@eddiefromcali 4 жыл бұрын

kinda makes the wait worth it all...just wish theyd upload more frequently

@dkjoses12 4 жыл бұрын

0 fluff

@rztrzt 4 жыл бұрын

@@technicalthug Yip, youtube creators are now doing what discovery, natgeo & history channels did, cater to the lowest common denominator...

@mr_ctrl_x4568 4 жыл бұрын

This is the ultimate KZfaq car channel

@orlandosotolongo3385 4 жыл бұрын

hell yeah man.

@GhaliumHD 4 жыл бұрын

This channel is the bench mark for all car performance modification videos on youtube.

@joey5395 4 жыл бұрын

bad obsession motorsport is also pretty in depth

@carlosvazquez4059 4 жыл бұрын

I subscribed I'm on board

@IntegraDIY 4 жыл бұрын

There are other great channels, but this channel is much more professional and has better production. Win win

@BigUriel 4 жыл бұрын

This isn't modding any more. They're building a whole new car.

@bobhope2607 4 жыл бұрын

You should also check out Moto IQ. Very informative and straight to the point

@Patrick94GSR 4 жыл бұрын

Supra assembly line worker seeing this video: "dammit I JUST put those parts in there!!!"

@izzdin6228 4 жыл бұрын

Lmao.

@alexisknows6513 4 жыл бұрын

TMR should have sent just welded frame ....

@Rainbow__cookie 3 жыл бұрын

Lol

@emilleirud4725 4 жыл бұрын

Other channels: make 50 episodes of ghetto ass modifications to a car, with little to no important information. Papadakis: Let's start in this episode, next one we're going testing

@jamesgand828 4 жыл бұрын

That's the difference between having budget and experience.

@chrisel2286 4 жыл бұрын

Sam Crac has entered the chat

@ardijanuar2036 4 жыл бұрын

Of course papadakis yt channel is just side/fun work for him as he's funded by big sponsors. Getting extra cash on top of the work you have already paid for to do must be nice 😂

@emilleirud4725 4 жыл бұрын

@@ardijanuar2036 Ye, he doesn't have to show us anything, yet he does. Which is highly appreciated atleast by people like myself, who's building my own driftcar. I'm nowhere near the budget, toolset or knowledge that Papadakis Racing has available, but it's cool to take a bit here and there which I can apply to my own car and build. Whereas certain other youtubers, should crawl back to the hole they came from, as they're utter useless, both as mechanics, and as content creators 😂

@emilleirud4725 4 жыл бұрын

@@jamesgand828 just because you budget is low, doesn't mean you have to make some ratchet ass build. Neither does it mean you should go forward as a guy who knows everything, and thus giving away tonnes of bad/false information on different subjects. Top example I remember on top of my head was a youtuber with a fair amount of subs, who went out and said that adding excessive amount of negative camber (stanceboi amounts) was best way to get more grip for your driftcar. I watched a couple of videos before I realised he was dead serious about that 😂

@FredricAasbo 4 жыл бұрын

Good job, Team! Can’t wait to test this thing!!

@mzr3352 4 жыл бұрын

You'll love it for sure. Pedal to the metal. Good luck man.

@jow_angelow 4 жыл бұрын

I can't wait for you to take down the streak of James this year! Best of luck Fredric

@ItzEminenze 4 жыл бұрын

Mangler bare en til Rudskogen nå!

@DarkLayerz 4 жыл бұрын

Can’t wait till the day someone wins and event and low key flex “o I won this round with a/c on to”😂

@henokhdarmawan7620 4 жыл бұрын

Best wishes for you, Steph and the whole Papadakis Racing Team crew in the coming season of FD! 🔥

@steveman1982 4 жыл бұрын

You: tear down brand new car Me: too cheap to buy a few cordless drill motors for a project

@1320MustangBoi 4 жыл бұрын

I LOVE how he explains everything. He makes everything so cut and dry, it’s amazing. Thank you for doing this for us Papadakis!

@JPapavas 4 жыл бұрын

Σκεφτόμουν ακριβώς το ίδιο πράγμα. Καλημέρα από Ελλάδα, καταπληκτική δουλειά.

@patrykwojtkowski9227 4 жыл бұрын

I would like to say one thing. THIS GARAGE IS SO CLEAN, I LOVE IT ! Instead of looking at supra I was looking at floor and I was asking myself, how the heck it's so clean :O

@jeffh6971 4 жыл бұрын

"Omg! You did this to a brand new car!" Lol excited to see the final product!

@twix2756 4 жыл бұрын

@Al Castill yes because that's just a frame. 👏 🤦‍♂️

@maxpaul11 4 жыл бұрын

Nice BMW!

@TurbineResearch 4 жыл бұрын

“ 2020 Supra destroyed in minutes” haha 😂

@jacknickolstine3355 4 жыл бұрын

It's just on a diet 😅

@cotajesus90 4 жыл бұрын

s14sean and afterwards it shall be called phoenix !! lol

@masashiiino6914 4 жыл бұрын

It's just on her crash diet :)

@foam27 4 жыл бұрын

It was never really a Supra.

@masashiiino6914 4 жыл бұрын

@@foam27 thanks captain obvious

@kewlbug 4 жыл бұрын

This would have been a years worth of content and a failed project on any other channel

@kingcs6273 4 жыл бұрын

Some car repair shops take a while just to fix some regular problem, lol.

@ernestjorda2777 4 жыл бұрын

It may be because these guys are a heavily funded race team first, and youtuber second.

@kewlbug 4 жыл бұрын

@@ernestjorda2777 True, I assume they have a small team assigned to this vehicle full time. And a budget 10x the average joe.

@ChuckBeefOG 4 жыл бұрын

Hahahaha

@npharkes 4 жыл бұрын

The difference between someone making a living from KZfaq and someone just doing it for fun...

@mixerm93 4 жыл бұрын

One of the best car related channels out there 👍 every video decently edited and well explained, no BS talk

@diymike 4 жыл бұрын

Sensei Papadakis does it again! Racing GOAT

@r3acionracing554 4 жыл бұрын

YES!!!! I thought this is where this was going!! I can't wait to see this in person at FD events!!!

@fadzilcheman4613 4 жыл бұрын

The best car build video format. Straight to the point, very informative and zero bullshit!

@butcht6309 4 жыл бұрын

Very straight forward. This is how other tuners and youtubers should do their videos. Every details were explained thoroughly without unnecessary and nonsense talk. Great job as always!

@robby_4877 4 жыл бұрын

This is the first channel I’ve turned notifications on for. Love the content and can’t wait to see more!

@guffaw5354 4 жыл бұрын

This is the content we need we need more like this channel amazing simply amazing

@jacknickolstine3355 4 жыл бұрын

Check out "uncle Tony's garage" on KZfaq. He is old school drag racing.

@skmetal7 4 жыл бұрын

This is why I don't have a cable subscription.

@biggusbestus551 4 жыл бұрын

I have 2020 Supra. This was "like totally"...awesome. Seriously, the video was made to order for an engineer that loves performance autos. You are very impressive and informative. I appreciate that, thank you !

@SloppyMechanics 4 жыл бұрын

Always Love these videos, thank you for your time

@benjenkin1605 4 жыл бұрын

this is dope! cant wait to see how fredi and the mk5 performs in FD this season!

@tirbomax 4 жыл бұрын

i'd loose my mind having a car down to this point!

@deebee9751 4 жыл бұрын

Great video and detail on the build Stephan! Cant wait to see you dominate again bro :)

@paulgorowitz4007 4 жыл бұрын

I find it crazy how you guys can just dismantle an entire car and throw the parts in piles without extensive organization or labeling. Shows the insane amount of experience you have in car building.

@MrMonkeyworld9 4 жыл бұрын

i love how your building a full on race car from scratch but still taking off the springs like some kid with a 1,6 civic hes putting lowering springs on

@MrTheHillfolk 4 жыл бұрын

I've done it for years that way on my mk1/2 vws , except I sit down on the floor and place the strut bearing against my feet. Safer than having shit fly in all directions

@joealex65 4 жыл бұрын

Yessssss! I knew it! This is awesome! Can't wait to see it finished!

@kswalchick1370 4 жыл бұрын

Love your videos. Concise, informative, no typical youtube BS.

@zul 4 жыл бұрын

Your videos have always been on point for quality, entertainment value, duration n content wise.... four thumbs up...

@vmoutsop 4 жыл бұрын

OMG, what a teaser. I hope the subsequent videos are longer. Let the camera's run. I absolutely love this project, cannot get enough!

@youngboy301 4 жыл бұрын

01:35 Damn, that's really makes me sad :-(

@TMgarage540 4 жыл бұрын

Great video! Straight to the business, no extra talking! Waiting for next episodes!

@revmatchtv 4 жыл бұрын

Totally fascinating! Thanks for showing us this. It’s a real eye opener into the construction of the Supra.

@ryandrzewiecki2467 4 жыл бұрын

This could have been a 2 hour episode and I would have watched every minute!!!

@CeltHDfifa 4 жыл бұрын

Fredric Aasbo - FD Champion 2020!

@leonfpv8261 4 жыл бұрын

Man these videos make me really appreciate two things. 1. The amount of resources (time and energy) that goes into designing and building the OEM car. 2. The amount of resources it takes to tear it all down and make a race car. Amazing work!!

@Xyrkul 4 жыл бұрын

Big Papa Steph and the crew back at it! I love watching your builds, so in depth I always learn something new!

@Icamadams 4 жыл бұрын

Lolol I love how he most likely did that suspension bit as a gag 😂 great stuff!

@oakleyxmetal9040 4 жыл бұрын

That's how we did it in the 90's lol

@maytronix7201 4 жыл бұрын

Mr. P: Seriously...dont try this at home Me: goes out and tries it immediately.

@MrTheHillfolk 4 жыл бұрын

I've done it for years that way on mk1/2 vws, except sit down and plant the strut bearing against your feet so it all flies one way.

@twots22 4 жыл бұрын

Great work! Can't wait. Appreciate your attention to detail.

@chrismartin6544 4 жыл бұрын

I love the way you break all of it down so even someone who knows very little about cars can understand.

@wesley8599 4 жыл бұрын

Anyone else at this stage: yeah I got a project car it'll be done by next season maybe Papadakis: yeah it's stripped, by the time editing is done it'll be a roller

@juanvasquez1576 4 жыл бұрын

today it has been on of the saddest day of my life, that being said i love your videos and keep it going hopefully i'll be able to go to your events.

@johnconnor7501 4 жыл бұрын

Hope things get better for you

@motamark 4 жыл бұрын

Another great video ....thanks so much for taking the time to make it !

@PerplexedPhoton 4 жыл бұрын

Been too long since we've had a video from you guys, excited to see this thing get built!

@Patrick94GSR 4 жыл бұрын

5:15 "Seriously don't try this at home" me: hey that looks like a cool shortcut, might have to use that next time I work on suspension! lol

@kells77 4 жыл бұрын

Patrick94GSR same

@Joe-zt8qs 4 жыл бұрын

You can also leave the strut installed in the mount, remove the top nut before you remove the 3 nuts that hold the assy in place, and it will fall out harmlessly under the car.

@MrTheHillfolk 4 жыл бұрын

Works fine , I used to do it that way all the time. Except it's actually a little safer if you sit down and place the strut bearing against your feet , so everything flies one way instead of all directions.

@RDSAlphard 4 жыл бұрын

4:08 - you know you done too many race car, when your mind just programmed to say "anti-lag" instead of "anti-lock" XD

@fatzr1240 4 жыл бұрын

RDS Alphard good catch🤣🤣🤣

@CoDisafishy 4 жыл бұрын

I heard lock.

@MechaTronic161 4 жыл бұрын

RDS Alphard get rid all that wax in your ears.😅😅😅

@arifkhamar6430 4 жыл бұрын

I heard anti-lag system

@MechaTronic161 4 жыл бұрын

arif khamar I heard “lock” with my Bose Soundport.

@rogerserafin 4 жыл бұрын

This is gonna be sick Steph !! Looking forward for more future videos leading up the the final product.

@tonycrispin 4 жыл бұрын

This is amazing! Love how quickly you get through everything but still explain it all!

@TruePurpleHaze 4 жыл бұрын

sup papadakis :D

@ammarwasim306 4 жыл бұрын

I would love to see how the car and the b58 holds up at the track

@AlphaFlight 4 жыл бұрын

Better than your shitbox

@ciello___8307 4 жыл бұрын

I think its gonna hold up great. They are using a race transmission so that pretty much fixes the only weakness big power mk5 guys have had

@nopers2223322 4 жыл бұрын

It won't

@creaky2436 4 жыл бұрын

As usual! Clean, crisp work always done right at papadakis racing. I'm not sure other teams go as far as you guys to achieve a desired result. Much respect. I can't fathom putting all of that back together haha. It's so interesting to see the process though, i can't get enough. Thank you for the videos.

@maciejszyszko7430 4 жыл бұрын

Genuinely, it is the most content packed channel in the whole YT. Well done!

@XantheFIN 4 жыл бұрын

"Parts pile: We not gonna use" -- Must be relabel of "Parts pile: Forgot where these goes".

@donloder1 4 жыл бұрын

They could sell it for when the mk5 gets some hard following. well i guess it already has.

@krusher74 4 жыл бұрын

Get the guard back on that grinder before you lose a finger!!!

@streamlineperformancevideo1926 4 жыл бұрын

For some reason, I can never skip forward on his videos... Well done again! Love this channel :)

@curbyourshi1056 3 жыл бұрын

Absolutely love these videos. No faffing about, just straight in, get it done, straight out. 👍👍👍

@69strokefasterthanyourmum 4 жыл бұрын

Nice, i love your work!👌😍 Maybe this is just a silly question, but why can't you guys ask a bare body/chassis from Toyota?

@penonton4260 4 жыл бұрын

from body to engine is all made by BMW not toyota ~

@zoravar.k7904 4 жыл бұрын

@Gossip Heart No, do you? Also companies do sell kit cars, so this would not exactly be breaking new ground.

@jenhorsey 4 жыл бұрын

Generally speaking, auto manufacturers don’t supply bodies-in-white very often. The cost savings to strip the production car down are more than offset by the cost of stopping down the production line at the body-in-white stage to pull a chassis. It’s typically more practical and cost-effective to have the team take on the labor.

@69strokefasterthanyourmum 4 жыл бұрын

@Gossip Heart No i don't. But it is not a street car, so it would never be registered right? So why does it matter? And are they not sponsored by toyota?

@69strokefasterthanyourmum 4 жыл бұрын

@@penonton4260 I know that, but this car is still owned by Toyota. You think that the whole car from electrical harness, pistons, bearings, tires to suspension is made by one factory?!? That would be crazy to think that. But i do agree that it is a shame that a lot (or too much) of parts were not made by Toyota...

@pequod6660 4 жыл бұрын

"Made already a thousand HP with the stock engine" Imagine all the kids saying this engine was shit because its not a 2jz and its Bmw

@PistonAvatarGuy 4 жыл бұрын

It wasn't a stock engine, it was pretty significantly modified. With the same mods, the 2JZ can make significantly more power than the B58.

@jjoeabhn2526 4 жыл бұрын

@@PistonAvatarGuy it really dident have a lot done to it pistons and rods thats it...

@WearyKirin 4 жыл бұрын

@@PistonAvatarGuy pistons rods head intake and turbo is not that significant

@PistonAvatarGuy 4 жыл бұрын

@@WearyKirin It is when the 2JZ can make something like 500 hp more with the same mods.

@alemãodeca 4 жыл бұрын

@@PistonAvatarGuy Stop being a fanboy and just admit that the B58 is good. The 2JZ was made for modifications, the B58 is just a mid/high level BMW engine who wasn't made thinking about modifications.

@jeffmech600 4 жыл бұрын

This is some serious content and build. These guys are at the top of their game

@nzkid07 4 жыл бұрын

crazy the amount of knowledge and experience you have on car. awesome video.

@ferrarimacedo96 4 жыл бұрын

Anti lag braking system ahahah never heard of it before. 😂 PS. I know it was a small error

@Hanschepu 4 жыл бұрын

heard it as Lag too, but Lock and Lag might sound similar in different accents. I for sure know this dude will not make a small error like that lol

@user-di6lj9hl7b 4 жыл бұрын

U might heard “anti luck” as well or anything else if you have 🍌 in your 👂🏻

@CoDisafishy 4 жыл бұрын

@@Hanschepu He said lock. He just said it fast and kind of lazily. I have an American accent and it's pretty obvious to me.

@Hanschepu 4 жыл бұрын

@@CoDisafishy I meant, that Lock sounds like Lag depending on accent, I know it obviously was ABS, just that I also heard it as lag.

@CoDisafishy 4 жыл бұрын

@@Hanschepu In his accent, which is the same as mine, the two words sound different. He just said it fast.

@lilman227 4 жыл бұрын

Anyone else heard “antilag braking”?

@allspooledup2584 4 жыл бұрын

Great video as always. Keep us posted on the build

@SLPAgaming99 4 жыл бұрын

Absolute mad lads cant wait to see how the car is going to look when its finished.

@jltcat 4 жыл бұрын

Toyota: We designed it to be race oriented sports car. Race team: time to throw the whole car away and build a race oriented car. Toyota: Am I a joke to you?

@izzdin6228 4 жыл бұрын

Isn't that how racecars based on production cars are done? Get rid of the fluff, in goes the good stuff.

@scottmotorsportz 3 жыл бұрын

It's a BMW.

@willmatic84 4 жыл бұрын

😄 wow never realized how much crap in modern cars it's crazy just the wires alone its alot the car is on life support.

@gonzalooliveraalves 4 жыл бұрын

All of the safety devices and electronic stuff add all the unnecessary weight. We don't need that in a racecar, because if we die, we die happily 😂

@kagenlim5271 4 жыл бұрын

@@gonzalooliveraalves What a really shitty thing to say bud.

@CoDisafishy 4 жыл бұрын

@@kagenlim5271 Why?

@IvelLeCog 4 жыл бұрын

I've been looking forward to this one. Everybody involved with this car is insanely talented. The tech used to modify the block in that first video was astounding. Right on the bleeding edge of manufacturing.

@MrCTruck 4 жыл бұрын

Dude every video is terrific. Direct, informative and always cool shit. Keep it up

@renof2505 4 жыл бұрын

Is there any Toyota in the car? Everything seems to have a BMW logo on it.

@chadhaire1711 4 жыл бұрын

no kidding. will be in the BMW shop for expensive repairs when warranty runs out

@branhub 4 жыл бұрын

Lol the badge on the front

@BuzzzdLightyear 4 жыл бұрын

4:07 "Anti-lag" Braking System huh?

@worldwithoutbass 4 жыл бұрын

He said lock

@CoDisafishy 4 жыл бұрын

@@worldwithoutbass Apparently a lot of people think he said lag. I heard lock too.

@benj12384 4 жыл бұрын

I enjoy this video. Its fast paced yet informative and accessible.

@schemsimon4160 4 жыл бұрын

I literally searched to see if you were sick or sold the car yesterday after watching your motor teardown for the 3rd time. Welcome back!

@ozzy1280 4 жыл бұрын

Man I haven't been this excited for a series of videos on youtube for a while! Can't wait for the next one

@lockdown204 2 жыл бұрын

Pure content, no filler. Not a second wasted.

@TheDIYTuners 4 жыл бұрын

Love your videos. so much straight to the point content and knowledge in such a short video

@c-fb 4 жыл бұрын

Amazing video once again! So impressive, but at the same time heartbreaking to see this beauty being torn apart, can’t wait to see the end result!

@ttbalog 4 жыл бұрын

Awesome stuff! Can't wait to see the next video.

@smudger6461 4 жыл бұрын

Man that was brutal to watch, as said it's to serve a purpose. Great content guys looking forward to more updates ✌

@MrMuddyfarmer 4 жыл бұрын

That was so satisfying to watch, this bloke is a perfectionist through and though! Can’t wait for the next episode 👍

@kennethjanczak4900 3 жыл бұрын

Thanks for taking the time to make this interresting serie and share it

@lmbtcs1879 4 жыл бұрын

This is going to be HUGE!! Cant wait to see the end product

@jannybravo8429 4 жыл бұрын

Excited about the build

@g.s777 4 жыл бұрын

This is bad ass I loved the engine teardown and rebuild videos no this awesome Channel and such good video quality.

@pilsonandrew 4 жыл бұрын

Man.... Papadakis is such a beast. I wish they would expand their KZfaq presence. So much awesomeness going on.

@bboydrummer1 4 жыл бұрын

I love the step-by-step format. Look forward to more videos!

@adrianncharles436 4 жыл бұрын

Very clean content well explained... love it cant wait to see the rest

@reviewcrewforyou 4 жыл бұрын

Man wish I could work for you and even just pick up 5 percent of the knowledge yall have. Thanks for the great videos

@TMERUNNR 4 жыл бұрын

True Masters of the Racing Automotive Industry. Luv this channel 👍

@jimmikrogh1103 4 жыл бұрын

very watchable edit - Thank you and keep up the good work. Greetings from denmark.

@Happy_2_Wheels 4 жыл бұрын

Thanks again for these great videos Stephan.

@Nevaloud 4 жыл бұрын

Don't worry about it Papa you guys got the money and talent to put it back together. Can't wait

@KHANG-VLOG 4 жыл бұрын

good work brother i like the way you explaning and doing work quickly as i wanted to make finish i like it

@sepabz5342 4 жыл бұрын

The only channel that worth watching. Stephan definitely knows what he’s doing

@chinaman69.1 4 жыл бұрын

Another great video informative straight to the point

@andrewcollins6525 4 жыл бұрын

Cant wait for the next one. Great job guys

@papasmurfao1 4 жыл бұрын

Excellent quality content. Thank you for sharing your work.

@jameshaulenbeek5931 4 жыл бұрын

Very cool! Looking forward to seeing the rest of the project!

@dimitriliving 4 жыл бұрын

This is the most intense build video ever! Great content guys!

@craigbullock8245 4 жыл бұрын

Amazing guys. Well done!

@ZhelyoKrastev 4 жыл бұрын

This is insane!! Thanks for sharing the process with us!