Surfskate Comparison (Waterborne/ Swelltech/ Carver/ YOW)

No video

Surfskate Comparison (Waterborne/ Swelltech/ Carver/ YOW)

Рет қаралды 28,909

Күн бұрын

In this video, I compare the Waterborne Surf Adapters, Carver CX4 trucks, YOW Meraki S5 trucks, and SwellTech system. I'll be comparing how quickly each setup picks up speed from pumping, how much each truck pivots, how sharply the boards turn and carve, and the general feel and ride of each surf skate.
0:00 - Introduction
0:51 - Pumping
3:05 - Pivot
4:37 - Carving
6:15 - Feel & Conclusion
7:03 - Outro
Subscribe for more boardsport content, comparisons and reviews!
Where I get my music (referral link):
epidemicsound.com/referral/6i...
Totem Transport - Arc De Soleil
Friend and Lover - Giants' Nest

Пікірлер: 85

@WATERBORNESKATEBOARDS 3 жыл бұрын

Thank you for including us! Keep it up dude!

@thomasscoville1148 2 жыл бұрын

learned 10x about surf skate from this than from any other youtube i watched. Great job.

@ShepherdAtHome Жыл бұрын

I’d love to see Smoothstar added to a video like this. I love the direct comparison you did on these. This was one of the best review videos I’ve seen

@LifeCoachCarmen 2 жыл бұрын

Amazing comparisons side by side - thank you for making this video! Wishing you 1,000 subs in NO time!

@gooz 2 жыл бұрын

Hey you’re welcome Carmen! And thank you so much!! I really appreciate it 😊🙏🏼

@cameronwagner3086 Жыл бұрын

Excellent video! I’ve been wanting to surf skate for a bit. This is a great review!

@cawleydavid 3 жыл бұрын

Nice video, some useful and accurate comparisons - loved the bit where you showed the 4-split screen and how each truck moves!!!. For your next video, (or just for your own interest!) try switching/comparing each different truck - using the same board. I've done this by putting my CX on the POke instead of the 28" Super Snapper, completely different experience! I don't think it's a fully accurate comparison when you compare trucks but on different board lengths & wheelbases. Good luck with the channel!

@darkjaypr5647 Жыл бұрын

Great quality content. Subscribed.

@Mastach00b Ай бұрын

Great video!

@MegaLenny1000 2 жыл бұрын

That was helpful! And congratz for your 1000 subscribers

@gooz 2 жыл бұрын

Hey Lenny I’m glad I could help! And thank you!! 😁🙏🏼

@KC-ro9ro 2 жыл бұрын

the reason the swelltech had the "least efficient pumping" is because you are actually doing the dreaded wiggling to pump. Its inefficient on the ST because it forces good technique. All the other surfskate promote wiggling, ST is the only surf accurate one

@TheFonzirelliz 2 жыл бұрын

exactly my thoughts! Propper pumping consistrs of compress and decompress, not wiggling. Wiggling on water takes you nowhere.

@rancidhotmail 2 жыл бұрын

Agreed, watching his technique made it obvious that this is not a good comparison

@vascooliveira9835 Жыл бұрын

Exactly

@giannabarret9262 7 ай бұрын

Exactly my favorite go to everything board!!! 🎉

@barrydworak 3 ай бұрын

This isn't quite true. Wiggling is a lot like a double pump bottom turn, where as you finish your initial bottom turn, you find yourself behind the section or just not going fast enough, so you add a wiggle to add speed as you go through the flats. Wiggling does simulate one technique used in surfing, just not the part of surfing that most excites us. Is the Swelltech going to simulate top turns and cutbacks pretty well? I haven't ridden one but it sure looks like it. But it seems like no surfskate can really simulate all of surfing completeiy on flat ground. The Carver CX (C7 is really different) with more resistance, can simulate pumping for speed, where the Swelltech can simulate top turns, on flat ground. Of course, a wave isn't flat, so transitions or surfskate-specific transitions like the wood wave, add a lot more variables.

@zhukovbody Жыл бұрын

Cool review!!! Thank you!

@danieledwards3144 Жыл бұрын

Nice breakdown! New sub.

@gooz Жыл бұрын

Thanks for subbing Daniel! 😁

@Sirin111 2 жыл бұрын

Thank you for doing a comparison video buddy! :)

@gooz 2 жыл бұрын

You’re welcome! :) thanks for watching!

@masterpropper2485 Жыл бұрын

@@gooz Maybe do another video with all trucks on the same deck?!

@karlrawstrone8568 3 жыл бұрын

Great to see the Poke in action again. I only started boarding three months ago so still have lots to learn. Have been running the Paris setup but have CX.4 trucks coming in a few days. So I'm hoping to have one setup for flatter longer runs and one for smaller wavier places. Great content. Maybe try a cone-cone on the CX front truck...

@gooz 3 жыл бұрын

Hey Karl thank you! That’s awesome you’ve started😁 I’m sure you’ll like the CX.4 trucks and you’ll feel the difference between the Carver and Paris trucks. Yeah that’s a good idea that I’ll have to try out

@axxis001 Жыл бұрын

Great video, thanks

@i-independence5601 3 жыл бұрын

Thanks for sharing man!

@gooz 3 жыл бұрын

Hey iSurfat41, you’re welcome and thanks for subscribing!😁

@SurfskateLove 3 жыл бұрын

Well done, Mark! Great visual demonstrations.

@gooz 3 жыл бұрын

Hey Steve, thank you! I appreciate your support😊

@danieledwards3144 Жыл бұрын

But seriously, nice breakdown.

@peterparker5759 Жыл бұрын

The trucks should have been compared in the same deck.

@masterpropper2485 Жыл бұрын

Yeah, maybe do another video with all trucks on one deck?!

@cocacool9829 7 ай бұрын

and same wheel base!

@bcrocks3935 2 жыл бұрын

Awesome video, but for a true feeling of the CX, use the factory cones. Gives way more lean. The nipple bushings you don’t even need a riser they are so restrictive. Need at least a quarter riser on a poke with carver bushings. Not as much rebound, but still really good, with better carving and pumping. Also the 20 1/4” wheelbase on the poke really takes away more than it adds. I think if you had the factory CX bushings on a 17-18 wheelbase, it would have made a way stronger showing. I love the CX trucks if you couldn’t tell….

@MJRamirezVideo 9 ай бұрын

Thanks for sharing

@elvergalarga6016 2 жыл бұрын

That poke cx set up. Want!

@Diegosaurio 3 жыл бұрын

Hey Mark, So far I had 2 surfkskates, slide and Swelltech. I started with the swelltech (bad idea) and had it for about 6 months. I never ride a skate in my life before the welltech, so as you can imagine, it was very difficult. I got my hands on the slide for about a week after a long wait. I hadn´t got out much, but I love it right away. The trucks system is fundamenal to compare one brand with the other, but I found that thw swelltech´s wheels was very small in comparison with Slides, It was very difficult to ride with the ST on an uneven road. Slide has giant wheels (very similar to the other boards shown here). The one thing I miss about the SW is that you can pump uphill very easy.

@99timewaster 3 жыл бұрын

standard swelltech wheels are not small, they are 70mm

@Diegosaurio 3 жыл бұрын

@@99timewaster 65 mm

@Diegosaurio 3 жыл бұрын

@@99timewaster you have both measures. But mine was 65 mm. Not friendly at all on uneven surfaces, compared to Slide ones.

@olivereitge4352 2 жыл бұрын

The wheelbases of these four boards are so different that you can’t just compare how they ride. Shorter wheelbase makes a board that much more nimble which affects turns and acceleration. You should’ve used all the trucks on the same deck.

@sageoz9886 Жыл бұрын

Great vid! Have you ever tried reversed rear trucks?

@Digiphex 2 жыл бұрын

Can you get the Poke to have wheel bite? It seems tapered at the front but there is no wheel well put in.

@danieledwards3144 Жыл бұрын

Comment for the alg.

@surfskate-uk1676 2 жыл бұрын

Just a heads up, that isn't a "swelltech" model, its the older v truck model which is a LOT more loose and has tiny wheels compared to a newer model with swelltech trucks. Swelltech trucks feel completely different to the model you have in the test.

@dannybuoyuk 2 жыл бұрын

Which one do you prefer? I just fitted a Waterborne to my Omakase and would like to try the CX next…

@MatthewMurraycogswoth 2 жыл бұрын

Is drop cat 33 a good board for pumping?

@stefanorossi8246 2 жыл бұрын

your opinion on Loaded poke. Thank you!

@juanmonge4949 Жыл бұрын

Pura Vida 🤙🏽🇨🇷🏝

@user-V-8-SBR 2 ай бұрын

Thank you Mark! Would you recomend the Carver for a completly Beginner?

@surfskateaddict5253 2 жыл бұрын

After a year i'd love to see the same content, I think you'll love ST more. I have Yow, WB, Carver c7, Smoothstar (the best) then I decided to buy a ST way better.

@LifeWithSpike Жыл бұрын

I have waterbornes on a Carver deck. I feel like my ankle is going to snap when I ride it compared to my identical sized decks with CX trucks.

@182punkbunny Жыл бұрын

Just subbed … and I am thinking of the waterborne … mainly cause I love to longboard and cruising long distance like 5 -10+ miles … so I’m on the fence if I should go for waterborne or cx4 Btw just subbed

@gooz Жыл бұрын

Hey thanks for subbing! The CX4’s feel closer to regular longboard trucks but they carve deeper and you can pump using them. They’ve got a bouncy feel from having bushings. The Waterborne adapters completely changed the feel of your trucks to a more flowy, looser feel like you’re surfing. So the Carver’s are closer to your current cruising setup while the Waterborne’s change up how your ride would feel

@danieledwards3144 Жыл бұрын

ANOTHER ONE

@chansi10 Жыл бұрын

The real question is what are you using the Surfskete for? I mean, if you only want to pump the city the carver experience is the best, because is the best pumper ever, but if you buy a surfskate for practicing while you are not in the beach, or in flat days... Swelltech is the best one i think because one reason: You are going to use it to train the surf moves to help you when you went back to the water!!! It's a so technique one? Yes! but this is what you really want!!! Also, the new trucks are so diferent, they improved a lot the first ones. Congratulations for the video instead, a very good edition. Hope to see you in the next actualization

@user-V-8-SBR 2 ай бұрын

Which one would you recomend for a complete Beginner? As well surfinging and skating. Carver? Thanks for letting me know.

@asgarhussain3744 Жыл бұрын

What's your recommendation for a beginner. I have access to purchase below 2 adapters, depending on the budget and place i live. 1. Yow V4 with S4 spring, which is recommended for

@YourDailyR 11 ай бұрын

At this point I believe you have figured out that the wheelbase on Yow was too short for you, that’s why you were nose diving.

@danieledwards3144 Жыл бұрын

COMMENTS FOR EVERYONE

@emokia15 2 жыл бұрын

Bro u nt pumping correctly. Use projection. This way the yow board is possible to pump even faster cos of the more stable rear trucks to pump harder for more speed. And the technique u use for swelltech is wrong. U have to engage yr whole body to get swelltech pumping in the correct way. While u wont get it faster than cx, it will be way faster than what u were doing.

@tulpa1940 Жыл бұрын

I'm testing the waterborne FIN and tossed some riptide krank fatcones on the board side of the rail adapter. I have so much control now and no scary lean. It's my favorite setup now easy.

@wellingtonferreira994 Жыл бұрын

it is worth remembering that they probably had Redbones bearings less St Swelltech than this one with abec 7

@MrHansPetersen Жыл бұрын

The Waterborn has 3 types. You drove with standard? It has also carve and mega pump mode.

@agenciaextremo9266 Жыл бұрын

and the winner is?

@bcrocks3935 2 жыл бұрын

Put your Yow trucks and 4 president wheels on the Omakase at the 20 3/4”wheelbase.You’re welcome😎👍

@pepucarrasco6991 Ай бұрын

Great video and thabk you for buying the 4 models to upload the review. But i muat aay as a swelltech user that your riding position is really bas. The review.is kinda biased at least for the swelltech because you're pumping it like if was a carver (and its not it have 2 springs to use them to pump insteado od moving your body that way).... Also your fret position is rrally poor, front foot ahouls be just above the 2 screws and you are puting it on the middke of the board. That way you cant generate leverage. Front foot should carry moat if the weight. I know that sounds scary but after aome.month of traininf you get it (as well after 1 year maybe learn how to pump with efficiency) Anyway thank you for the content im not trying to hate on just to share as well!!

@atlanticisla5507 2 жыл бұрын

Hi do you sell you yow kontiki deck?

@gooz 2 жыл бұрын

Hi, sorry no it’s not for sale!

@chrisquin9 2 жыл бұрын

Noticed a lot of arm swinging. Was this early on when you first learned to ride surf skates or is not because the pavement is so rough ?

@gooz 2 жыл бұрын

Hey Chris, yes this was early on before I learned the correct technique! I watched a lot of Surfskate Love and Shane Lai videos afterwards which helped.

@chrisquin9 2 жыл бұрын

@@gooz marvelous ! I was just curious thanks much !

@gooz 2 жыл бұрын

You’re welcome! 😊

@PoppyRaid 6 ай бұрын

Good info thanks .. hey 😂you have a private message option re new truck ideas 🤔👊✌️

@cocacool9829 7 ай бұрын

Nice test but Wrong comparison. The Yow board is too small(wheelbase) for the skater and he is clearly not used to swing arm. Would have been much quicker then the Carver with a board the same size and a better foot position (to much forward now!)

@jonthesailorman 2 жыл бұрын

Good video and review format. You’ve got to get better at riding before you’re review’s will be more relevant. You aren’t riding these boards correctly, so you’re not going be able to articulate the nuanced differences between these systems for their intended users. At best, this is relevant towards other beginners. It’s got potential however.

@vinztheoriginal 3 жыл бұрын

The video is well made but the way you pump and carve are invalidating the information you give. That kinda sad. You lack of proper technique unfortunately.

@thebobman69 3 жыл бұрын

its not claimed to be scientific. different wheels/ bearings/ wheel bases. I think very useful for people starting out. I got the yow, but was considering the carver,.

@DHolmquistDesigns 2 жыл бұрын

Seriously this dude obvi doesn’t know how to surf… and when reviewing surf skates that’s pretty much 50% of it

@philman6494 2 жыл бұрын

Yea he is def doing it wrong lol. Too much arms and stiff body.

@gleo3232 4 ай бұрын

Not to hate or nothing but your form is not good brother you gotta get lower and push with your back foot

@giannabarret9262 7 ай бұрын

Sorry bruh you can't carve any of them we'll be honest with yourself! I have a Swelltteck and it's by far the best and yes it cruises too! It's all about practice makes perfect 😊