Suspension Joints Explained
Рет қаралды 13,636
Күн бұрынWhat suspension joint do you need? Today, we go over the three major types of suspension joints that Barnes 4WD offers. We go over generally what they were made for and how they work. Most importantly, we go over what we at Barnes 4WD recommend for different rigs and suspensions. Whether you're building a Toyota, Jeep, or Land Rover, we've got you covered.
Below are the links to each of the different suspension joints.
Poly Joint:
www.barnes4wd.com/Forged-Chro...
Enduro Joint:
www.barnes4wd.com/Enduro-Join...
Heim Joint:
www.barnes4wd.com/Heat-Treate...
@scottadvevture2022 Жыл бұрын
thanks for all the info have a great year
@JeepTeriyaki 2 жыл бұрын
My TJ has johnny joints aka enduro joint on the long arms(control arms) 5.5 inch sus lift and Heim joints on my steering arms. Handles awesome on and off road! Good video!
@boondocksoverlandandoutdoors Жыл бұрын
Looking to go y’all’s route on the 3link kit.. I plan on slapping it on my first Gen Tundra! Already have the 05+ SD 60 axle pretty hyped about this build! Thanks for the great vid, sold me with y’all’s enduro type joint. Most likely will be giving y’all a call this week! 🤙🏽
@NightWrencher 3 жыл бұрын
Very Informative 👍
@barnes4wd 3 жыл бұрын
Thanks!
@jakemitchell3535 3 жыл бұрын
Running your enduro joints on my custom 3 link xj. Love them! Best value in a joint.
@barnes4wd 3 жыл бұрын
awesome to hear!
@tthams73 9 ай бұрын
I run Heim tie rod ends on my 240z. They work great! They do not transfer vibrations to the body as often rumored and the ride is just as smooth as standard tie rods. However, the steering is much smoother and responsive.
@nvrqit9361 Жыл бұрын
How you grade the enduro joints ? I got a bunch of the and the regular ones The regular ones as a fitting that I was able to used The enduro ones I couldn’t used the same greaser
@BlackAndBlueGarage Жыл бұрын
Just ordered a bunch of stuff with Enduro joints. Can't wait to get it and open it all up. You guys mind if I drop your name and link in a video?
@barnes4wd Жыл бұрын
Go for it!
@BlackAndBlueGarage Жыл бұрын
@@barnes4wd this just made my day 😁
@woof3598 Жыл бұрын
when you grease a rebuildable joint should yuo pump grease untill it starts coming out the sides or just give it a couple of pumps when you first install them ?
@barnes4wd Жыл бұрын
Around two or three good pumps is plenty 👍🏻
@genoory5090 9 ай бұрын
What size & length is the heim joint your holding and the link to purchase it?
@barnes4wd 9 ай бұрын
That is an 1 1/4” Magnum Heim Joint. Here is the link to our magnum Heim joints. barnes4wd.com/collections/magnum-series-heims
PADLOTOON
Рет қаралды 38 МЛН
MotorTrend Channel
Рет қаралды 183 М.
Rock Krawler
Рет қаралды 73 М.
BleepinJeep
Рет қаралды 68 М.
RaceCraft HQ
Рет қаралды 16 М.
Анастасия Адаева
Рет қаралды 13 МЛН
Европа Плюс
Рет қаралды 542 М.
Анастасия Адаева
Рет қаралды 13 МЛН
Доступное право. Юристы
Рет қаралды 2,1 МЛН
Roud Offthegun
Рет қаралды 1,4 МЛН